Ruark Audio MRx User manual

User guide
Brugervejledning
Bedienungsanleitung
Guía del usuario
Guide de l’utilisateur
Manuale dell’utente
Gebruikershandleiding
Brukerveiledning
󻸛󼐘󼓿󾖴󼊷󺸣󻺋
     
EN
DA
DE
ES
FR
IT
NL
NO
KR
JA
User guide EN
Connected wireless speaker
MRx

EN-2
Thank you for choosing our MRx connected wireless speaker.
Ruark Audio began life as specialists in high-delity speaker systems and
this passion for sound quality lies at the heart of all our products. With
a beautifully handcrafted cabinet, this MRx connected speaker blends
streaming technologies with a high-delity stereo amplier and our latest
full-range neodymium drivers to produce a remarkably clear, rich and
detailed sound.
Enjoy it alone, in a multi-room group or even as a stereo pair.
Please take the time to read this user guide to help you get the best
performance from your MRx. Look after it and it will reward you with many
years of listening pleasure.
We love the MRx and I hope you will too!
Alan O’Rourke
Founder and Managing Director

EN-3
EN
DA
DE
FR
IT
ES
NL
NO
What’s in the box
Ensure that all the parts listed
below are in the box.
If any part is missing, do not use
the MRx. If purchased in the UK,
contact us directly. If purchased
outside the UK, please contact
your Ruark Audio dealer.
1. MRx wireless speaker
2. AC power adapter
3. Plug(s) for AC power adapter*
4. Optical 3.5mm jack adapter
5. User guide
6. Stand
Please retain the carton and all
packing materials.
* The number and type of plug adapters
supplied will vary according to region.
1
3
4
56 2

EN-4
Overview
7. Controls
8. 75mm neodymium driver
9. Wall mounting points (1/4-20 UNC)
10. STEREO MODE SWITCH
11. Network status indicator light
12. USB port for playback and device
charging (max 5W 1A)
13. Ethernet socket (RJ45)
14. Combined 3.5mm analogue and
optical input jack
15. DC power socket (14V 2A)
16. Security slot
7
1516
10
11
12
13
14
88
9

EN-5
EN
DA
DE
FR
IT
ES
NL
NO
Controls
17. CONTROL KNOB
Rotate to change volume
Press to cycle through sources
Press to turn on from standby
Press and hold until all indicator lights turn off
(approx 1s) to enter standby
Press and hold until all 3 lights illuminate
(approx 4s) to enter setup mode
18. AUX IN mode indicator light
19. BLUETOOTH mode indicator light
20. NETWORK mode indicator light
Indicator lights
All front panel lights
All on Startup
Flashing in sequence Setup mode
All ashing Software updating
Aux in
Solid amber Aux input playback mode
Bluetooth
Solid blue Connected to a device
Flashing blue Pairing mode
Network
Solid green Network source mode
Flashing green Network connecting
Solid red No network connection
Network status (on back)
Solid green Connected
Flashing green Connecting
Flashing red Network error
Solid red Not connected
17 19
20
18

EN-6
Setup
1. Placement
Keep other wireless equipment at least 30cm (1ft) away from your MRx to
avoid interference. Avoid placing inside or near a metal cabinet as this will
reduce Wi-Fi and Bluetooth range.
2. Fit the stand
Fit the stand to your MRx in either portrait or landscape mode, ensuring you
push the stand rmly into the corresponding rubber sockets on the back of
your MRx and place on a stable and level surface.
3. Select stereo mode
Set whether your MRx is in
stereo/mono/left/right mode
using the STEREO MODE
SWITCH on the back panel.
See Stereo mode section for
more details.

EN-7
EN
DA
DE
FR
IT
ES
NL
NO
4. Install the Ruark Link app
Download and install the app on your mobile device.
5. Connect to mains power
Fit the correct plug for your region to the mains adapter,
it will “click” into place. Connect the mains adapter to
the DC power socket on the back of your MRx, then
connect it to the mains socket. All three indicator lights
will illuminate as your MRx starts up.
6. Set up your MRx using Ruark Link
Your MRx is in setup mode when all three lights on the
front panel ash in sequence.*
Open the Ruark Link app on your mobile device, select
“SET UP AUDIO SYSTEM” and follow the on-screen
instructions.
If the setup wizard is unable to nd your MRx, you may
need to connect to your MRx’s Wi-Fi hotspot manually,
go to the Wi-Fi settings on your mobile device and
connect to Ruark MRx [code] where [code] is the
unique MAC address of your MRx. Once you have
connected your device to your MRx Wi-Fi hotspot,
return to the Ruark Link app and follow the on-screen
instructions.
7. Enjoy your MRx
Once set up, you can control your MRx using the Ruark
Link app from any smartphone or tablet on the same
network, as well as access all its features including
internet radio, music streaming services and multi-room
audio.
* If instead of all the lights ashing in sequence, only
one indicator light comes on, press and hold the
CONTROL KNOB for approx 4 seconds until all 3 lights
illuminate, then release. Your MRx will reboot and come
on again in SETUP mode.

EN-8
Common functions
The CONTROL KNOB allows you to adjust the volume
and select source; however, for full control of the
network sources and access multi-room functions, you
will need the Ruark Link app.
For more details see www.ruarkaudio.com/link
Turn on and standby
To go to standby, press and hold the CONTROL KNOB
from any playing mode until the current source indicator
light turns off.
To turn on from standby, press the CONTROL KNOB.
Change volume
Rotate the CONTROL KNOB while listening to audio.
When you reach the maximum or minimum volume, the
source indicator light will briey turn off.
Connect to a new network
To connect your MRx to a different network (Wi-Fi or
Ethernet), press and hold the volume knob for approx.
4 seconds until all three source lights illuminate. Your
MRx will then reboot in SETUP mode and the front panel
lights will ash in sequence. You can now use the Ruark
Link app to connect your MRx to the new network.
See Setup section for more details.
Change source
Press the CONTROL KNOB to cycle through sources.
If your MRx is connected to Wi-Fi and you want to
connect it via Ethernet (or vice versa), you need to run
SETUP again.

EN-9
EN
DA
DE
FR
IT
ES
NL
NO
Bluetooth
To change to Bluetooth mode, press the CONTROL
KNOB until the blue Bluetooth indicator light illuminates
or use the Ruark Link app to select Bluetooth source.
Connecting a Bluetooth device
When you select Bluetooth mode, your MRx will go into
pairing mode and the Bluetooth indicator light will ash.
Use the Bluetooth setup on your phone, tablet or laptop
to pair and connect it to your MRx. It will appear in the
list of paired devices as Ruark MRx although this will
change if you rename it using the Ruark Link app.
It may take a few seconds for your MRx to appear in the
list on your device, and in some cases you may need to
input “0000” as the pairing password.
Bluetooth volume
If your phone, tablet or laptop allows you to vary the
volume of Bluetooth playback, we recommend you set it
to maximum for optimum playback quality.
Auto connect
When you change to Bluetooth mode, your MRx will
attempt to reconnect to the last connected device. If it
can’t connect, it will automatically enter pairing mode.
Pairing additional devices
You can pair up to 5 devices, although you will only be
able to play audio from one device at a time.
For more information visit
www.ruarkaudio.com/support
Your MRx includes aptX coding technology so if your
smart device is also aptX enabled, you will benefit from
CD-quality streaming.

EN-10
Aux input (analogue/optical)
Your MRx can play audio from both analogue and digital
sources via the combined analogue/optical input jack on
the back panel.
To change to aux input mode, press the CONTROL
KNOB until the amber AUX IN indicator light illuminates
or use the Ruark Link app to select the Aux input
source.
To play from an analogue source (eg the headphone
output of a media player), connect it to the combined
jack socket using a 3.5mm stereo jack cable.
To play from a digital optical source (eg TV), connect it
to the combined jack socket using an optical cable and
the optical 3.5mm jack adapter provided.
Aux input volume
For optimum playback quality, adjust the volume of the
external device so that it is as near to full volume as
possible without distorting.

EN-11
EN
DA
DE
FR
IT
ES
NL
NO
Internet Radio
Your MRx can play thousands of internet radio stations
and podcasts from all over the world. Select your MRx
in the Ruark Link app and under source, select Internet
Radio.
When listening to an internet radio station, the green
NETWORK indicator light will illuminate.
Station presets
You can store 10 Internet radio stations in your preset
list on the Ruark Link app.
Ruark radio portal
In addition to presets, you can also store your favourite
stations or even add stations manually using the online
Ruark radio portal.
www.ruarkaudio.com/radioportal
My favourites
This is similar to storing presets, except that the
stations are stored online, on the Ruark radio portal.
This means that your saved favourite stations are
accessible from any Ruark internet radio product
registered on the same account. These stations are
accessible by going to Browse > My Favourites in the
Ruark Link app.
My added stations
You can manually add stations that are not already
listed by visiting the online Ruark radio portal. Stations
added this way are accessible by going to Browse > My
Added Stations in the Ruark Link app.
You will need the unique portal access code for your
MRx by going to Browse > Help > Get access code in
the Ruark Link app.

EN-12
Music player
Music player enables you to play audio les stored on a
computer on your network, a NAS drive or a USB ash
drive. Select your MRx in the Ruark Link app and under
source, select Music Player.
When listening to Music Player audio, the green
NETWORK indicator light will illuminate.
USB music player
Connect your USB ash drive into the USB socket on
the back panel of your MRx and select USB under the
Music Player source in the Ruark Link app.
Although your MRx will power or charge most USB
devices, it may not charge or power devices that
requires a current greater than 1A (5W).
Local Music player
To play audio les stored on your phone or tablet, select
your MRx in the Ruark Link app and under source,
select Local Music.
When listening to Music Player audio, the green
NETWORK indicator light will illuminate.
DLNA streaming
Your MRx is a DLNA Digital Media Renderer so you can
stream audio to it from a compatible media server. There
are many apps available for Mac, iOS, Linux, Android,
Windows phone, etc that will turn your smartphone,
tablet or laptop into a DLNA media server. Windows
Media Player even has a ‘Play to’ function built in that
allows you to stream music stored on your computer
directly to your MRx.
When listening to Music Player audio, the green
NETWORK indicator light will illuminate.
Your USB disk must be FAT32 format. Rights-protected
WMA and AAC tracks cannot be played.

EN-13
EN
DA
DE
FR
IT
ES
NL
NO
Music streaming services
Your MRx supports the music streaming services shown
below*. When listening to music streaming services, the
green NETWORK indicator light will illuminate.
Spotify Connect
Spotify Connect for users with Spotify Premium.
For more details, www.spotify.com/premium
Listen out loud with Spotify Connect
1. Connect your Ruark MRx to your wi network.
2. Open up the Spotify app on your phone, tablet or
laptop using the same wi network.
3. Play a song and select Devices Available.
4. Select your Ruark MRx and start listening.
Amazon Music
For more details, visit www.amazon.com/
AmazonMusicUnlimited
Deezer
For more details, visit www.deezer.com
Tidal
For more details, visit www.tidal.com
* The range of supported music services may change
without notice.

EN-14
Multi-room
This device is fully compatible with Ruark Audio
multi-room and enables you to seamlessly stream music
from one room to another.
Use the Ruark Link app on your mobile device to create
a group of up to 5 devices that will all play the same
synchronised audio. Once you have created a group,
other devices can be added to it.
If a group already exists on your network, you can
add your MRx either using the Ruark Link app on your
mobile device or using the controls on the other Ruark
devices in that group.
For more information on multi-room and how to set up,
access and control this feature, visit
www.ruarkaudio.com/support
Wall-mounting
Remove the stand and secure your MRx to a
wall-mounting bracket compatible with the following:
59mm
1/4-20 UNC
1/4-20 UNC
Audio from a TV may not be perfectly synchronised
with the video when in multi-room mode

EN-15
EN
DA
DE
FR
IT
ES
NL
NO
Stereo mode
Mono/stereo mode
You can position your MRx in both
landscape or portrait mode. For best
audio performance we recommend
you set the STEREO MODE SWITCH
on the back panel to STEREO when
using in landscape mode and MONO
when using in portrait mode.
Left/right mode
You can use a pair of MRx speakers
as a left/right stereo pair by adding
both speakers to a multi-room group
and then setting the STEREO MODE
SWITCH on the back panel to LEFT
on the left speaker, and RIGHT on the
right speaker, see Overview section.
In LEFT mode, the speaker will only
reproduce the left channel and in
RIGHT mode, only the right channel.
Please note that audio from a TV may not be perfectly
synchronised with the video when used as a stereo pair
STEREO
LEFT
RIGHT
MONO
STEREO
LEFT
RIGHT
MONO
STEREO
LEFT
RIGHT
MONO
STEREO
LEFT
RIGHT
MONO
STEREO
LEFT
RIGHT
MONO
STEREO
LEFT
RIGHT
MONO

EN-16
• Read this user guide and follow all instructions, it will help
you set up and operate your product properly.
• Heed all warnings and keep this user guide for future
reference.
• Do not attempt to use a damaged device as this could
result in a dangerous electric shock.
• Do not open the unit or remove any panels or speaker
grilles. No user serviceable parts inside.
• Refer all servicing to qualied service personnel. Servicing
is required when the device has been damaged in any
way, such as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the
device, the device has been exposed to rain or moisture,
does not operate normally, or has been dropped.
• This device is intended to be operated ONLY from
the AC voltages listed on the back panel or included
power supply. Operation from voltages other than those
indicated may cause irreversible damage to the device
and void the product warranty.
• Ensure that the mains plug or mains connector into the
unit is readily accessible in case disconnection from the
mains is required.
• The mains adapter, mains plug or mains connector must
be removed from the socket to completely disconnect the
system from mains power.
• Do not place any naked ame sources, such as lighted
candles, on or near the device. Do not install near any
heat sources such as radiators, stoves, or other devices
(including ampliers) that produce heat.
• Avoid exposure to extreme heat or cold.
• Only use attachments/accessories specied for
this device. Make no modications to the system or
accessories. Unauthorised alterations may compromise
safety, regulatory compliance, and system performance.
• To reduce the risk of re or electrical shock, do not expose
the device to rain or moisture. Do not expose this device
to dripping or splashing, and do not place objects lled
with liquids, such as vases, on or near the device. As with
any electronic products, use care not to spill liquids into
any part of the system. Liquids can cause a failure and/or
a re hazard.
• Unplug this device during lightning storms or when
unused for long periods of time to prevent damage to this
device.
• To prevent risk of re or electric shock, avoid overloading
wall outlets, extension cords, or integral convenience
receptacles.
• Long-term exposure to loud music may cause hearing
damage. It is best to avoid extreme volume when using
headphones, especially for extended periods.
• Do not install this device in a conned space. Always
leave a space of at least 10cm around the device for
ventilation and ensure that curtains or other objects never
cover ventilation openings on the device.
Safety and regulatory information

EN-17
EN
DA
DE
FR
IT
ES
NL
NO
This device is labelled in accordance with
European Directive 2012/19/EU concerning waste
electrical and electronic equipment. This symbol
indicates that the product or associated batteries
should not be disposed of as general household
waste. As with any electrical equipment, please
dispose of it according to local regulations.
CE COMPLIANCE INFORMATION
This product conforms to all EU Directive requirements
as applicable by law. You may obtain a free copy of the
Declaration of Conformity by contacting your dealer,
distributor, or Ruark Audio.
Hereby, Ruark Audio, declares that this device complies with
the essential requirements and other relevant provisions of
the European Radio Equipment Directive 2014/53/EU.
You can download the full CE Declaration of Conformity at
www.ruarkaudio.com/doc/mrxdoc.pdf
Troubleshooting
Sometimes resetting your MRx to factory settings can
x common problems. To reset your MRx complete the
following steps:
1. Disconnect your MRx from the mains power supply.
2. Set the STEREO MODE SWITCH to the LEFT position.
3. While holding down the CONTROL KNOB, reconnect the
mains power supply.
Once your MRx has rebooted, it will automatically go into
setup mode (see Setup section). Set it up as normal and
remember to put the STEREO MODE SWITCH back to
your desired setting. Resetting it will also clear the Bluetooth
pairing list so you will need to pair your Bluetooth devices
again.
For further help with your product, please refer to the FAQ
(Frequently Asked Questions) page in the support area of our
website.
For more information visit www.ruarkaudio.com/support

EN-18
Specifications
Amplifiers and drivers
• 2 x 75mm neodymium high-delity drivers
• Tuned bass reex cabinet
• 16W nominal power output
• Enhanced 3D sound processor
Digital audio
• Internet radio, UPnP™ DLNA
• 802.11b/g Wi-Fi supports WEP, WPA & WPA2 security
• MP3, WMA, AAC, FLAC, WAV
• SBC, AAC, A2DP, aptX Bluetooth
• Optical S/PDIF input
• Ruark multi-room compatible (up to 5 devices per
group)
Inputs and outputs
• Combined analogue/optical 3.5mm jack input
• USB playback, 5W (1A) output
Power supply
• Input power 100 to 240VAC 50-60Hz 1A max
• Output power 14VDC 2A
Power consumption
• 10-12W typical
• 28W max
• 3W standby
Physical
• Dimensions with stand in landscape mode:
W300 x H180 x D180mm (11.8 x 7.1 x 7.1ins)
• Dimensions without stand in landscape mode:
W300 x H175 x D160mm (11.8 x 6.9 x 6.3ins)
• Weight: 3.4kg (7.5lbs)
• Security slot
• Wall-bracket compatible
For more information visit
www.ruarkaudio.com/support
Specication and design subject to modication without notice.

EN-19
EN
DA
DE
FR
IT
ES
NL
NO
Guarantee information
We guarantee this product to be free from defects for a period of
two years from date of purchase, providing due care and attention
has been paid. Product failure through accidental damage (however
caused), excessive wear and tear, negligence or unauthorised
modification will void your guarantee.
Should you experience a problem please contact us via our website
www.ruarkaudio.com or by calling directly on 01702 601410 where
we will advise the course of action. If your product needs to be
returned it should be packaged in its original packing along with
proof of purchase. If it is not possible to return the product by hand,
then it should be sent carriage prepaid by a reputable parcel carrier.
If the original packing is not available, replacement packing can be
purchased from us.
Guarantee for overseas sales
The distributor in the country of purchase guarantees products
purchased outside the UK. For details, please contact your local
Ruark distributor or outlet.
THIS GUARANTEE IN NO WAY VARIES OR REMOVES THE
PURCHASER’S STATUTORY RIGHTS. E&OE
General care
• Clean with a soft, lint-free duster or slightly dampened cloth. Do
not use wax sprays or other substances as these may damage
the surface nish or impair performance.
• Do not expose your unit to direct sunlight, high humidity, dust,
excessive vibration or extreme temperatures, all of which can
affect the nish, performance and reliability of the unit.
• Recommended operating temperature range is 5°C to 40°C.
• Natural wood nish cabinets will vary and lighten or darken with
age, particularly when exposed to sunlight.
Copyright and trademarks
© 2018 Ruark Audio. All rights reserved. Ruark Audio, the Ruark
Audio logo, and other Ruark Audio marks are owned by Ruark Audio
andmay be registered. All other trademarks are the property of their
respective owners. Ruark Audio assumes no responsibility for any
errors that may appear in this manual and the information contained
in it may change without notice.
Bluetooth®and associated logos are registered trademarks owned by
Bluetooth SIG, Inc.
Qualcomm aptX is a product of Qualcomm Technologies
International, Ltd.
The Spotify software is subject to third party licenses found here:
www.spotify.com/connect/third-party-licenses
All other trademarks are the property of their respective owners.

20180313.2
59 Tailors Court, Temple Farm Industrial Estate,
Southend on Sea, Essex, SS2 5TH, UK
[phone] www.ruarkaudio.com
Designed in
Great Britain