Rugged Computing WARRIOR Y250 User manual
&
Assembly Instructions
OWNER’S MANUAL
Y250-121217
SKU# Y250
STRENGTH & FITNESS
WARRIOR
SPOTTER ARMS
Warning, Safety & Maintenance
2
Be sure that all users carefully read and understand all
warning, safety and maintenance labels on the machine
before each use. Failure to do so may result in death or
serious injury.
It is imperative that you retain this Owner’s Manual and be
sure all warning labels are legible and intact. Replacement
Owner’s Manuals and warning labels are available from
Rugged Fitness.
If you have any questions about the operation, set up or
maintenance of this machine please call our customer service
department at 1 (800) 556-3113.
Table of Contents
3
Important Safety Instructions
4
Il est conseille de subir un examen medical complet avant d’entreprendre tout programme d’exercise.
Si vous avez des etourdissements ou des faiblesses, arretez les exercices immediatement.
Antes de comenzar cualquier programma de ejercicios, deberias tener un examen sico con su doctor.
When using exercise equipment, you
should always take basic precautions,
including the following:
m
m Do not remove any safety labels from the
machine.
m
m
m
m
m
m
m
m
m
m
m
Personal Safety During Assembly
m
m
m
RUGGED FITNESS
SPOTTER ARMS.
1-800-556-3113
Obtaining Service
Toll Free: 1-800-556-3113
Phone: 1-708-427-3555
Fax: 1-708-427-3556
Hours: M-F 8:30-5:00 CST
E-Mail: service@ruggedtness.com
Or write to: Rugged Fitness
Service Department
1900 S. Des Plaines Ave.
Forest Park, IL 60130 USA
Retain this Owner’s Manual for future
reference. If you need to order replacement
parts please be prepared to provide the
following information when contacting us so
that we can assist you better.
1. Model Number
2. Place of Purchase
3. Serial Number (S/N)
4. Part # and Description
Preparation
5
-
-
Required Tools
Y250
m
m
m
Installation Requirements
Y250Y250
Fill out and mail the warranty card
Assembly Tips
Y250
NOTE:
CAUTION:
6
Y250 Parts & Hardware List
Part# Qty Description
45
7
Parts Illustration
8
STEP
1
Be careful to assemble all components
in the sequence they are presented.
NOTE:
Finger tighten all hardware in this step. DO NOT wrench tighten until instructed.
Some components may be pre-assembled. Nylon lock nuts will not fully screw onto
bolts, they must be wrench tightened to fully go on.
Adjustable J Cups
1A. (G & H)
1B. (J)
(H & G).
STEP
1
9
45
10
Notes
11
Y250 Exploded View
Y250
STRENGTH & FITNESS
Table of contents
Other Rugged Computing Sport & Outdoor manuals
