Sodex Sport S30454 User manual

1 1
DESCRIPTION
Steel structure
Powder coated
ASSEMBLY INSTRUCTIONS
MOBILE STORAGE RACKS FOR 4
PAIRS OF POSTS
PRODUCT REF :S30454 UNIT
ASSEMBLY TIME
The time to make the assembly of this volleyball post is estimated for 1 person, at 20minutes. (without sealing).
MAINTENANCE
The equipement has to be regularly maintained by the owner. It is adviced to:
- Check every week that all the screws are correctly tightened
- Fix paint defects if the module has been damaged, using the adapted paint, specified by the manufacturer.
- Replace all damaged or missing parts with a spare part recommended by the manufacturer.
- Clean the product by using dishwasher soap, clean water, and soft cloth.
It is advised to carry out this cleaning once or twice a year, or even more regularly according to the environmental
conditions (saline environment, …).
WARRANTY
One full year parts and labor guarantee. Every claim regarding condition of the delivered equipment has to be done
within the legal period of the reception of the material. The warranty will not apply to:
- all degradation during the transport.
- all degradation due to use differing from which was intended.
- all degradation due to poor maintenance.
- any defect claimed after the end of the legal period.
- any damaged due to a faulty installation and assembly of the module

2 2
ASSEMBLY
NECESSARY TOOLS (NOT INCLUDED)
INCLUDED TEMS
NECESSARY
ITEMS
1– ASSEMBLY OF THE FRAME (x2)
Wrench 17mm
Wrench 19mm
SS Screw M10x70
x2 x2
SS Washers 10
x4
SS Washers 12
x4
SS Nuts M12
LEFT FRAME
LOWER CONNECTING
BAR
Wheel +
SS Washers 12+
SS Nuts M12
Snap the 2 lower connecting bars to the left frame until the holes are aligned. Then
tighten by putting the wheel axle D70 in this hole.
Repeat this step with the right side
frame
x2
SS Washers 12
x2
SS Nuts M12
x2
Wheel D70
Screwer
x14
Screws M5x15
x4
Wheel D70

3 3
ASSEMBLY
2– ASSEMBLY OF THE FRAME TO THE CONNECTING BAR (x2)
NECESSARY
ITEMS
LEFT FRAME
SS Screws M10x70 +
SS Washers 10 +
CONNECTING BAR
SS Screw M10x70
x2 x2
SS Washers 10
Repeat this step with the right side
frame
3– ASSEMBLY OF THE WOOD FLOOR
NECESSARY
ITEMS
WOOD FLOOR Self tapping screws M5x15
x14
Screws M5x15

NOMENCLATURE
Package
N° Ref Index Designation Description Quantity Packing Method Weight (kg)
Dim.
(mm)
A1 S30454-01 CLeft side + right side 1
Plastic bubbles
+ cardboard 5
layers
15 850x150x450
A2 S30454-02 ALow connecting bar +
Higher bar 2+1
Plastic bubbles
+ cardboard 5
layers
10 1250x1000x10
0
A3 S30454-03 BWooden plate
1200x300x18 1
Plastic bubbles
+ cardboard 5
layers
61205x305x22
A4 S30454-09 AAccessories
Plastic bubbles
+ cardboard 5
layers
350x350x200
ACCESSORIES IN CLEAR PVC BAG
Package
N° Ref Designation Description Qty Note
A4 LITA122610+
TITC12
Wheel D70+
SS Washers 12+
SS Nuts M12
4+4+4 To be fixed to the
frame
A4 BITH1070+
LITA102510
SS Screws M10x70+
SS Washers 10 2+2
For assembly of the
sides and the con-
necting bars
A4 VTKK0515 Self tapping screws
M5x15 14 To fix the wood
PRE-ASSEMBLED ACCESSORIES
Package
N° Ref Designation Description Qty Note
A1 NC16 Rubber cap D16 16
A1 PVC Tube Ф16 16
A1 NNV40 PVC Cap 40x40 4
VISA PACKING DEPARTMENT
DATE:
PACKING LIST
MOBILE STORAGE RACKS FOR 4
PAIRS OF POSTS
PRODUCT REF S30454 Index C UNIT