Ruijie Reyee RG-PA150I-FS Installation and operating manual

RG-PA150I-FS, PA300I-FS, PA460I-FS,
PA600I-FS Power Modules
Hardware Installation and Reference Guide
Document Version: V1.0
Date: 2023-10-09
Copyright © 2023 Ruijie Networks

Copyright
Copyright © 2023 Ruijie Networks
All rights are reserved in this document and this statement.
Without the prior written consent of Ruijie Networks, any organization or individual shall not reproduce, extract,
back up, modify, or propagate the content of this document in any manner or in any form, or translate it into
other languages or use some or all parts of the document for commercial purposes.
,, and other Ruijie Networks logos are trademarks of Ruijie Networks.
All other trademarks or registered trademarks mentioned in this document are owned by their respective
owners.
Disclaimer
The products, services, or features you purchase are subject to commercial contracts and terms, and some or
all of the products, services, or features described in this document may not be available for you to purchase or
use. Except for the agreement in the contract, Ruijie Networks makes no explicit or implicit statements or
warranties with respect to the content of this document.
The content of this document will be updated from time to time due to product version upgrades or other
reasons, Ruijie Networks reserves the right to modify the content of the document without any notice or prompt.
This manual is designed merely as a user guide. Ruijie Networks has tried its best to ensure the accuracy and
reliability of the content when compiling this manual, but it does not guarantee that the content of the manual is
completely free of errors or omissions, and all the information in this manual does not constitute any explicit or
implicit warranties.

I
Preface
Intended Audience
This document is intended for:
Network engineers
Technical support and servicing engineers
Network administrators
Technical Support
The official website of Ruijie Reyee: https://www.ruijienetworks.com/products/reyee
Technical Support Website: https://www.ruijienetworks.com/support
Case Portal: https://caseportal.ruijienetworks.com
Community: https://community.ruijienetworks.com
Technical Support Email: [email protected]
Conventions
1. Signs
This document also uses signs to indicate some important points during the operation. The meanings of these
signs are as follows:
Caution
An alert that calls attention to safety instruction that if not understood or followed can result in personal injury.
Warning
An alert that calls attention to important rules and information that if not understood or followed can result in
data loss or equipment damage.
Note
An alert that calls attention to essential information that if not understood or followed can result in function
failure or performance degradation.
Instruction
An alert that contains additional or supplementary information that if not understood or followed will not lead to
serious consequences.
Specification
An alert that contains a description of product or version support.

II
2. Note
This manual provides installation steps, troubleshooting, technical specifications, and usage guidelines for
cables and connectors. It is intended for users who want to understand the above and have extensive
experience in network deployment and management, and assume that users are familiar with related terms and
concepts.

Ruijie Reyee Power Modules Hardware Installation and Reference Guide RG-PA150I-FS
1
1 RG-PA150I-FS
Power module for RG-NBS6002 series switches:
AC input: Currently only the RG-NBS6002 series switches support the RG-PA150I-FS power module.
Caution
The RG-NBS6002 supports power modules in 1+1 redundancy mode. To improve system stability and reliability,
you are advised to configure power modules in 1+1 redundancy mode.
1.1 Appearance
The label is on the top panel of the power module.
1.1.1 External Ports
RG-PA150I-FS is an AC power module that provides AC power input and supplies 12 V voltage to the system.
The front panel has a three-pin AC power connector for connecting a standard 10 A power cord.
1.1.2 LEDs
LED
Silkscreen Label
Status
Description
Status LED
N/A
Off
There is no power input or the power module is
not functioning properly.
Solid green
The power module is outputting power normally.
1.2 Technical Specifications
Model
RG-PA150I-FS

Ruijie Reyee Power Modules Hardware Installation and Reference Guide RG-PA150I-FS
2
Rated Voltage
Range
100 VAC to 240 VAC, 50/60 Hz
Max. Voltage
Range
90 V to 264 V, 47/63 Hz
Max. Output
Power
100 V to 240 V, 150 W
Input Current
< 3 A at 90 VAC to 264 VAC at full load
Leakage
Current
< 3.5 mA at 110 VAC and 220 VAC, 50/60 Hz
Net Weight
0.55 kg (1.21 lbs.)
Power Cord
10 A power cord
Caution
●When connecting the power cord, make sure to fasten the latch securely to prevent any looseness.
●The power cord should be connected to an output socket which connects to the ground.
●Maximum operating altitude: 5000 m (16404.19 ft.); maximum storage altitude: 5000 m (16404.19 ft.)
DOUBLE POLE/NEUTRAL FUSING：
●The fuse is in the neutral, and that the mains shall be disconnected to de-energize the phase conductors.
Warning
Operation of this equipment in a residential environment could cause radio interference.

Ruijie Reyee Power Modules Hardware Installation and Reference Guide RG-PA300I-FS
3
2 RG-PA300I-FS
2.1 Appearance
The label is on the top panel of the power module.
2.1.1 External Ports
RG-PA300I-FS is an AC power module that provides AC power input and supplies 12 V voltage to the system.
The front panel has a three-pin AC power connector for connecting a standard 10 Apower cord.
The label is on the top panel of the power module.
2.1.2 LEDs
LED
Silkscreen
Label
Status
Description
Status LED
N/A
Off
There is no power input or the power
module is not functioning properly.
Solid green
The power module is outputting power
normally.
2.2 Technical Specifications
Model
RG-PA300I-FS
Rated Voltage Range
100 V to 240 V, 200 V to 240V, 50/60 Hz
Max. Voltage Range
90 V to 264 V, 47/63 Hz
Max. Output Power
100 V to 240 V, 300 W

Ruijie Reyee Power Modules Hardware Installation and Reference Guide RG-PA300I-FS
4
Ground-Leakage Current
≤ 1.5 mA
Net Weight
0.85 kg (1.87 lbs.)
Power Cord
10 A power cord
Caution
●When connecting the power cord, make sure to fasten the latch securely to prevent any looseness.
●The power cord should be connected to an output socket which connects to the ground.
●Maximum operating altitude: 5000 m (16404.19 ft.); maximum storage altitude: 5000 m (16404.19 ft.)
DOUBLE POLE/NEUTRAL FUSING：
●The fuse is in the neutral, and that the mains shall be disconnected to de-energize the phase conductors.
Warning
Operation of this equipment in a residential environment could cause radio interference.
Warning: This power supply is not serviceable, do not disassemble to avoid electric shock.

Ruijie Reyee Power Modules Hardware Installation and Reference Guide RG-PA460I-FS
5
3 RG-PA460I-FS
3.1 Appearance
The label is on the top panel of the power module.
3.1.1 External Ports
RG-PA460I-FS is an AC power module that provides AC power input to RG-NBS7003 and supplies 12 V
voltage to the system. The front panel has a three-pin AC power connector for connecting a standard 10 A
power cord.
3.1.2 LEDs
LED
Silkscreen
Label
Status
Description
Status LED
N/A
Off
There is no power input or the power
module is not functioning properly.
Solid green
The power module is outputting power
normally.
3.2 Technical Specifications
Model
RG-PA460I-FS
Rated Voltage Range
100 V to 240 V, 200 V to 240V, 50/60 Hz
Max. Voltage Range
90 V to 264 V, 47/63 Hz

Ruijie Reyee Power Modules Hardware Installation and Reference Guide RG-PA460I-FS
6
Max. Output Power
100 V to 240 V, 460 W
Ground-Leakage Current
≤ 3 mA
Net Weight
0.9 kg (1.98 lbs.)
Power Cord
10 A power cord
Caution
●When connecting the power cord, make sure to fasten the latch securely to prevent any looseness.
●The power cord should be connected to an output socket which connects to the ground.
●Maximum operating altitude: 5000 m (16404.19 ft.); maximum storage altitude: 5000 m (16404.19 ft.)
DOUBLE POLE/NEUTRAL FUSING：
●The fuse is in the neutral, and that the mains shall be disconnected to de-energize the phase conductors.
Warning
Operation of this equipment in a residential environment could cause radio interference.
Warning: This power supply is not serviceable, do not disassemble to avoid electric shock.

Ruijie Reyee Power Modules Hardware Installation and Reference Guide RG-PA600I-FS
7
4 RG-PA600I-FS
4.1 Appearance
The label is on the top panel of the power module.
4.1.1 External Ports
RG-PA600I-FS is an AC power module that provides AC power input and supplies 12 V voltage to the system.
The front panel has a three-pin AC power connector for connecting a standard 10 A power cord.
4.1.2 LEDs
No.
Description
LED
AC
DC/FLT
1
The power module is operating
normally.
Solid green
Solid green
2
No power input or input
undervoltage
Off
Solid red
3
Overvoltage alarm
Solid green
Solid red
4
Overcurrent alarm
Solid green
Solid red
5
Overtemperature alarm
Solid green
Solid orange
6
Overheat alarm
Solid green
Solid red
7
Primary-side on/off control
Solid green
Solid red

Ruijie Reyee Power Modules Hardware Installation and Reference Guide RG-PA600I-FS
8
4.2 Technical Specifications
Model
RG-PA600I-FS
Rated Voltage Range
100 V to 240 V, 200 V to 240V, 50/60 Hz
Max. Voltage Range
90 V to 264 V, 47/63 Hz
Max. Output Power
90 VAC to 180 VAC, 600 W
180 VAC to 264 VAC, 600 W
Ground-Leakage Current
≤ 0.85 mA
Net Weight
1.64 kg (3.62 lbs.)
Power Cord
10 A power cord
Caution
●When connecting the power cord, make sure to fasten the latch securely to prevent any looseness.
●The power cord should be connected to an output socket which connects to the ground.
●Maximum operating altitude: 5000 m (16404.19 ft.); maximum storage altitude: 5000 m (16404.19 ft.)
DOUBLE POLE/NEUTRAL FUSING：
●The fuse is in the neutral, and that the mains shall be disconnected to de-energize the phase conductors.
Warning
●Operation of this equipment in a residential environment could cause radio interference.
●Warning: This power supply is not serviceable, do not disassemble to avoid electric shock.