Ruris DAC 1224e User manual

BATTERY Leaf Blower
DAC 1224e

CONTENT
1. Introduction...............................................................................3
2. Safety information ....................................................................4
3. Technical data..........................................................................8
4. Overview ..........................................................................................9
4.1 Fitting the tube .................................................................................................10
5. Blower operation ............................................................................11
6. Declarations of Conformity.............................................................13

3
1. INTRODUCTION
Dear Client!
Thank you for your decision to purchase a RURIS product and for your
trust in our company! RURIS has been on the market since 1993 and
during all this time it has become a strong brand, which has built its
reputation by keeping promises, but also by continuous investments
aimed at helping customers with reliable, efficient and quality solutions.
We are confident that you will appreciate our product and enjoy its
performance for a long time. RURIS does not offer its customers only
machines, but complete solutions. An important element in the
relationship with the customer is advice both before and after the sale,
as RURIS customers have at their disposal a whole network of partner
stores and service points.
To enjoy the purchased product, please read the user manual carefully.
By following the instructions, you will be guaranteed a long use.
The RURIS company is continuously working on the development of its
products and therefore reserves the right to modify, among other things,
their form, appearance and performance, without having the obligation
to communicate this in advance.
Thank you once again for choosing RURIS products!
Customer information and support:
Phone: [phone]
e-mail: [email protected]

4
2. SAFETY INFORMATION
SAVE THESE SAFETY INSTRUCTIONS.
WARNING: Do not use this blower until you have read this instruction manual and are
familiar with the safety, operation, and maintenance instructions.
WORK AREA SAFETY
Keep the work area clean and well lit.
Do not use power tools in explosive atmospheres, such as in the presence of liquids,
gases or fuel vapors. Power tools create sparks that can ignite fuel gases or vapors.
Keep children and bystanders away. All visitors and pets must be kept a safe distance
from the work area.
Do not allow children or untrained persons to use this machine.
Do not expose power tools to rain or moisture. If water gets into a power tool, it will
increase the risk of electric shock.
Do not handle the plug or tool with wet hands.
Never allow children to operate the equipment. Never allow adults to operate the
equipment without proper instruction.
Always wear goggles and a protective mask.
Clip long hair above shoulder level to prevent it from getting caught in moving parts.
Do not expose the machine to rain, store it indoors.
Do not operate in low light conditions.
Keep all parts of your body away from any moving parts of the machine.

5
Wear long pants, safety boots and gloves. Avoid loose clothing and jewelry that can get
caught in moving parts of the machine.
Do not force the machine.
Do not use the equipment barefoot or with sandals or inappropriate footwear. Wear
protective footwear.
Maintain a firm stance and balance when using the blower.
Do not use the tool if the switch is not functional.
Keep all bystanders, children and pets at least 50 meters away.
Do not use this unit when you are tired, ill, or under the influence of alcohol, drugs, or
medication.
Keep all parts of your body away from moving parts and all hot surfaces of the tool.
Use only original spare parts and accessories from the manufacturer. Use of any other
part may create a hazard or cause damage to the product.
Do not charge the battery tool in the rain or in a wet place. This rule will reduce the risk
of electric shock.
Battery powered tools must not be plugged into an electrical outlet; so they are always in
working condition. Be aware of potential hazards even when not using the cordless tool
or when changing accessories. Following this rule will reduce the risk of electric shock,
fire or serious personal injury.
Disconnect the battery before servicing or cleaning the machine.
Use only batteries recommended by the manufacturer.
Do not dispose of batteries in fire, the cells may explode. Consult local regulations for
possible special disposal instructions.

6
Do not open or damage batteries. The released electrolyte is corrosive and can cause
skin and eye irritation. May be toxic if swallowed.
Do not place battery tools or their batteries near fire or heat. This will reduce the risk of
explosion.
Do not crush, drop or damage the battery. Do not use a damaged battery or charger.
Do not point the tool at people or pets.
When not in use, the tool should be stored indoors in a dry, locked area out of the reach
of children.
Handle the tool with care. Keep the tool clean for high performance.
PERSONAL SECURITY
All persons, children and pets must remain a safe distance from the work area.
Do not use the tool when you are tired or under the influence of drugs, alcohol or
medication.
Do not use the tool for any work other than that for which it is intended.
Do not wear loose clothing or jewelry when using the tool.
Wear safety glasses.
Avoid accidental start. Make sure the switch is in the off position before connecting the
battery or when transporting the tool.
USE AND MAINTENANCE
Familiarize yourself with the tool. Read the manual carefully, learn about its applications
and limitations, and specific potential hazards associated with this machine.

7
Check for misaligned or jammed moving parts, broken parts, and any other defects that
could affect the operation of the tool. If damaged, repair the power tool before using it.
Do not force the power tool. Use the power tool correctly for your application.
Disconnect the battery from the power tool before making adjustments, changing
accessories, or storing power tools.
Check the operation of the tool before using it.
Do not use the tool if it does not have a legible warning label.
Use the power tool in accordance with these instructions, taking into account the working
conditions. Using the power tool for operations other than those intended could result in
a hazardous situation.
Battery safety rules
Battery powered tools must not be plugged into an electrical outlet; therefore, they are
always in working order. Following this rule will reduce the risk of electric shock, fire or
serious personal injury.
WARNING: When transporting or servicing the unit, always disconnect the battery.
Service
Tool maintenance should only be performed by qualified personnel. Service or
maintenance performed by unqualified personnel may increase the risk of accidents.
When servicing a tool, use only original spare parts.
Some of the following symbols may be used on this device. Please study them and
understand their meaning. The correct interpretation of these symbols will allow you to
use the machine better and safer.
Symbols on the machine
The technical label on the car may show some symbols. This is important information
about the product or instructions on its use.

8
Read the manual.
Wear hearing protection.
Careful! Danger.
Careful! Debris may be ejected from the
outlet.
Careful! Keep your distance.
Do not expose to rain.
Before maintenance, remove the battery.
3. TECHNICAL DATA
Motor
Electric, with brushes
Battery
Li-Ion 20V 4 Ah (not included in
the product)
Total Power
Pw = 80 Wh
Speed
16000rpm

9
Maximum air speed
35 m/s
Maximum air volume
550m³/h
Handle vibrations
0.49 m/s 2 K= 1.5 m/s 2
Weight
1.8 kg
4. OVERVIEW
1. Blower tube
2. ON/OFF switch
3. Variable speed knob
4. Handle
5. Battery (not included)

10
The images are informative, the supplier reserves the right to make structural and
functional changes to the machine presented in this manual.
The battery benefits from the "α UP-Innovation RURIS" function. This function
helps the battery when it reaches the critical discharge threshold. Ruris came up
with an innovation in the system of cells inside the battery, through which the
battery can be recharged after a long period of time in which it has been
discharged. Thus, RURIS users can enjoy the reliability and innovation of RURIS.
After storage, charging is recommended at an interval of 6 months - 1 year
4.1 FITTING THE TUBE
The blower tube can be installed on the blower without using any tools.
assembling
To prevent accidental starting that could
cause serious personal injury, always
remove the battery from the blower when
assembling parts.
Insert the blower tube over the exhaust
hole and block it.
You can use this blower for the purposes
listed below:
•Cleaning surfaces such as driveways and driveways.
•Keeping driveways, garages and decks clear by removing leaves, pine needles
and other small debris.
It is not intended for use other than those listed above.
NOTE: Toavoid seriouspersonalinjury,always remove thebattery and keephands away
from the variable speed trigger when transporting.