Rutland County MORCOTT User manual

Assembly Instructions
T
Morcott recycling
storage unit
1
Before you commence the assembly process we recommend that you read these instructions
thoroughly beforehand to familiarise yourself with the assembly process and to also check that you have
the correct components. If for any reason you need assistance, you can find our contact details on the
final page of these instructions.
We highly recommend that any assembly is carried out on a flat, level surface if possible and that you
use another person to assist you if necessary.
Package contents
Tools required
2 x End panels
1 x Back panel
1 x Front panel
1 x Roof
1 x Metal bar
1 x Shelf
65mm screws
75mm screws
2 x spacer blocks
Coach screws (multiple units only)
Electric screwdriver with No2 Pozidrive bit
Or No2 Pozidrive Screwdriver
Morcott wheelie bin storage unit

Morcott recycling storage unit
Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,
Aslackby, Sleaford, Lincs, NG34 0HZ.
Company No: 7670072 VAT No: 151744027
2
Step 1
Step 2
Stand the left hand end panel upright on a flat, level
surface.
Arrange the 2 spacer blocks on the ground, adjacent
to the end panel as shown in the photo above. Now
place a back panel on the blocks, at 90° to the end
panel, aligning the 2 panels ready for fixing.
Step 3
Step 4
Using the 65mm screws provided, attach the batten
on the back panel to the post of the end panel,
ensuring that the batten remains vertically aligned to
the post.
Now secure the right side panel in place with 65mm
screws in the same manner as you attached the left
side panel.

Morcott recycling storage unit
Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,
Aslackby, Sleaford, Lincs, NG34 0HZ.
Company No: 7670072 VAT No: 151744027
3
Step 5
Step 6
Lay the assembly on its back and position the metal
bar as shown across the bottom of the front posts.
(Please note: The metal bar will be screwed to the
side panel during packing for security and will need to
be removed prior to commencing construction.)
Keeping the metal bar flush with the edge of the post,
secure it in position using 2 65mm screws and repeat
for the other side.
Step 7
Step 8
Carefully lift the assembly back into the normal
position.
Place the roof section onto the store and align the
rear securing batten with the edge of the rear post as
shown and secure each end of the batten to the posts
with an 75mm screw.

Morcott recycling storage unit
Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,
Aslackby, Sleaford, Lincs, NG34 0HZ.
Company No: 7670072 VAT No: 151744027
4
Step 9
Step 10
The roof can now be propped in place as shown.
Inside the store there are 2 support battens...
Step 11
Step 12
...for you to place the shelf on.
Hang the door on the hooks and your Morcott
recycling storage unit is now complete.
We hope that you found your product quick and easy to assemble but if not and you require any
further assistance or have any questions you can contact us by telephone on: 01778 440803
Email: [email protected]
www.rutlandcountygardenfurniture.co.uk