SAB SABIP1000 User manual

V1.0
Package Contents
1Hardware Introduction
Physical Description
Hardware Installation
Model: SABIP1000
Model: SABIP1000
Quick Installation Guide
HD IP Camera
Resource CD
Ethernet Cable
Power AdapterIP Camera
Quick Installation Guide
Quick Installation Guide
Outdoor HD WirelessIP Camera
LAN
Power
Reset Button
Infrared LED
LENS
1. Manually clockwise base to loosen the snap.
2. According to the monitored area, install the base of the
camera on the ceiling or wall with expansion screws.
3. Assembly the sphere, cover and decorative ring of the
order, according to the monitored area to turn the angle
of the sphere. Finally, manually rotate anti clockwise to
lock the snaps.
Ceiling or wall
Base
Sphere
Cover
Decorative ring

4 FAQ
2Add the IP Camera 3Access the IP Camera
You can add the IP Camera by Smart Phone.
1. Download the App
You can go to the App Store or Google Play store and
search and install “SAB IPC Viewer”.
After your camera has been successfully added, you
can access the IP Camera via the App or computer.
2. Add the IP Camera
Run the APP, then you can tap the "+" button on the
App and follow the wizard to add your camera.
The App icon will be displayed after successful
installation:
Please Note:
If you want to use your camera in tranditional way, you
can search and access its local website in LAN(Local
Area Network).
Please copy the “IP Camera Search Tool” file from the
CD to your computer, run it to search and access the IP
Camera in LAN.
Forget Username / Password
Please Note:
After restore to factory default settings, you need to
config the Wi-Fi connection again, you can follow
the Setup Wizard of the App to add again.
In case your device failed to add by Wi-Fi, you can
use WPS or wired connection. please refer to the
User Manual on the CD.
Restore camera back to factory settings:
1. Press "Reset" button for about 10 seconds with camera
powered on.
2. Release the button and wait about 30 seconds, the
camera will automatically restart, and restore factory
settings with its username / password recovery to
admin / (blank) .
Hardware Connection
WPS
1. Connect the power adapter to the camera.
2. Turn on your wireless router.
Before you start, please note:
Make sure your smartphone is located near the camera.
Do not use an ethernet cable to connect the camera if
you want to use a wireless connection.
Make sure smartphone is connected to your wireless
router.
SAB IPC Viewer