SABINE BACKTRAK BT-300 User manual

RECORD LEVEL:
Adjust the volume of
music you’re recording.
HEADPHONE
LEVEL: Adjusts the
volume level when you
listen with headphones.
LINE OUT: Connect
to your amplifier to
hear yourself through
speakers.
SPLIT/MIXED:
When listening with
headphones, allows
you to hear sampled
music in one channel,
and yourself in
the other.
HEADPHONES:
Plug in headphones for
personal listening; adjust
volume with “headphone
level” control.
INSTRUMENT IN:
Plug your instrument
in here.
LINE IN: Plug your
source music in here
with stereo mini-plug.
LEFT/BOTH/RIGHT:
Record only the channels of
source music you want.
ON-OFF
PLAYBACK SPEED:
Select from four playback
speeds (1/3, 1/2, 2/3 or
full) without changing
the pitch. LED indicates
present setting.
RECORD: Press the
“stop” & “play” buttons
together to begin recording.
Records continuously until
you press “stop.” Saves
your recording in memory
until you hit record again –
even with power off.
STOP: Press
this button to
stop recording,
or playback.
PLAY: Plays your 30
second sample of music
over and over, until you
press “stop.” Starts over
again each time you
press “play.” Sounds
great at all speeds!
B ACK T RAK
™
BT-316M & BT-300
Take it Slow,
Learn it Fast!
SABINE®
It’s pretty obvious – if you’re trying to learn that hot new solo, it’s much
easier to practice it a little slower at first. Wouldn’t it be great if you could
take your favorite riff from a CD or tape, slow it down to “decode” it (with-
out changing the pitch!), then gradually speed it up to the original tempo?
Sabine made that possible with the BackTrak BT-300.
Now there’s an even better way to learn that new solo – the next
generation BackTrak BT-316M riff decoder & digital sampler. Record any
riff, up to 30 seconds, then slow it down to your choice of speeds. And
the new BT-316M sounds great at any speed. Play along as the
BackTrak loops the riff over & over, then increase the speed until you’ve
got it down! It’s that easy! Use the BackTrak as a sampler at your gig!
For the best value and quality in “phrase trainers” visit your dealer
and get one of the new Sabine Backtraks.
Learn any riff the fast and easy way
with the New BackTrak BT-316M.
riff decoder & digital sampler
13301 Highway 441
Alachua, Florida 32615 USA
Tel: [phone]
Fax: [phone]
Fax-Back Product Info:
[phone]
www.Sabine.com
TWO-YEAR WARRANTY • MADE IN USA
©2001 Sabine, Inc.
BTA-100
ACCESSORY PACK
Everything you need to
use your BackTrak, or any
personal digital sampler
or stereo.
Now with 16-bit High Quality Audio
and Power-Off Sample Memory!
NEW!
Sample any riff, up to 30 seconds.
Slow it down to any of 3 speeds,
without changing the pitch.
BackTrak plays the riff over and
over, while you play along.
BT-316M saves your sample even
when you turn it off!
Increase the speed setting until
you’re playing at full speed!
1
2
3
4
BT-300
BT-316M