Sabrent TH-3DP2 User manual

Thunderbolt 3
Dual DP Display Adapter
Connect Two DP 1.2 Displays to a Thunderbolt 3 interface
TH-3DP2 USER MANUAL

TH-3DP2 USER MANUAL
The Thunderbolt™3 Dual DP output adapter lets users
easily connect two DP 1.2 Displays to a computer with
Thunderbolt™3 interface. This adapter’s output resolution
is up to 4096X2160@60Hz. Plug & Play tool-less
installation makes for an easy setup.
Connect the adapter to an available
Thunderbolt™3 port on your computer
1

Connect your displays to the DP ports
on this adapter
2

Your displays should automatically extend
3
Go into your display settings to
customize your screens
4
DisplayPort
DisplayPort
NOTES
4K supported Display is required
for a 4K resolution
Make sure that your Display is set
to the correct Input Source
Some of the first computers to include Thunderbolt™3
require firmware and software updates
Please contact our Technical Support Team
for additional troubleshooting
www.sabrent.com
Thunderbolt and the Thunderbolt logo are trademarks of Intel Corporation
or its subsidiaries in the U.S. and/or other countries