SACKit ROCKit User manual

1
ROCKit EARBUDS
User Manual
UK
DK
DE

2
Thank you!
Thank you for purchasing these ROCKit True Wireless earbuds from
SACKit. Please read the entire instruction manual before using the
product and save it for future reference. We reserve the right for any
errors in text or images and any necessary changes made to technical
data. If you have any questions regarding technical problems please
contact our customer services. We hope you will enjoy your new
ROCKit True Wireless Earbuds.
1. Go to www.sackit.eu/reg
2. Enter name, e-mail, and product*
Register your new SACKit product and get cool benets.
*When you register your product, you agree to receive email newsletters from SACKit.
CONGRATULATIONS on your new SACKit product!
Box contents
1. ROCKit earbuds
2. ROCKit wireless charging case
3. USB-C charging cable
4. Quick start guide

3
First use
Place your ROCKit earphones in
the wireless charging case.
Connect the case to either of 2 options. 1: a power supply or 2: a Qi
wireless charger, like CHARGEit. Charge for 2 hours minimum.
1. 2.

4
Battery information
• Battery: rechargeable Polymer Lithium-Ion Battery, DC:
3.7V/590mAh for charging case, 2 x 75mAh for earbuds
• Power: USB DC5V, Please use the USB-C cable included with
your ROCKit earbuds for charging
• Charging Time: For rst time use please be sure the battery has
been charged fully before use. It needs more than 3 hours of
charging the rst time, then 2 hours for recharging
Description of the appliance Touch buttons
Placement of
left earbud
Placement of
right earbud Charging port

5
Correct placement of the ROCKit earbuds
Place the earbuds in the ears like shown below. It is important that
you place the inside ear support downwards. You can twist the
earbuds until you nd the right placement.

6
Use ROCKit earphones
1. For rst use: remove ROCKit earbuds from the case. Both
earbuds will blink white on the top edge LED
2. The left earbud will blink red/white, indicating ROCKit is in
pairing mode and the earbuds are connected via True Wireless
Stereo
3. Switch on Bluetooth on your device
4. Choose “ROCKit L” under Bluetooth settings on your device.
Your earbuds are now connected with your device
5. Start playing music on your device
6. ROCKit automatically switches on/off when connected/
disconnected to the charging case. Manually power on/off by
holding down the earbud buttons for 10 seconds
7. ROCKit will automatically pair with the last connected device.
8. To connect to a new device make sure that the previous
connected device is disconnected otherwise connecting
opportunity won’t appear on the new device.

7
How to pair ROCKit earbuds with Bluetooth devices
• Simply remove your ROCKit earbuds from the charging case or
long press the X button on your earbuds for 10 seconds. After
the rst 5 seconds, you will hear the ON sound. Keep press-
ing the button for another 5 seconds to turn on pairing mode,
indicated by ashing red and white LED lights
• Please keep the earbuds and Bluetooth device in range of 1
meter when pairing and make sure ROCKit is turned on
• Go into the Bluetooth settings on your device and search for
new Bluetooth devices and select ROCKit L
• The LED light will blink white once ROCKit is successfully
paired
• Long press X button on the earbuds to turn off your ROCKit
earbuds
• ROCKit can remember 8 devices: You can pair 8 units with your
ROCKit, at 9th unit ROCKit will forget the rst connected
Operation instructions for use after rst pairing:
• After rst time pairing your ROCKit earbuds and Bluetooth
device will automatically reconnect
• Turn the earbuds on by holding down the X button until you
hear the ON sound or by removing the earbuds from the case
• Long press X button to turn off

8
Basic functions of ROCKit earbuds
Left earbud - function left earbud - operation on earbud
Volume down - 1 tap 1 tap
Previous song Hold for 2 seconds
Play/pause 2 taps
SIRI®/Google™ 3 taps
Answer/end call 2 taps
Right earbud - function Right earbud - operation on earbud
Volume up 1 tap
Next song Hold for 2 seconds
Play/pause 2 taps
SIRI®/Google™ 3 taps
Answer/end call 2 taps

9
LED functions for ROCKit earbuds
When earbuds are charging in case
- LED function Indication of LED function
Red blinks Earbuds are charging
LED off Earbuds are fully charged
When earbuds are in use - LED
function Indication of LED function
White blinks Earbuds paired with a device
White/red blinks Pairing mode
4 red blinks each minute Earbuds needs charging

10
LED battery functions for ROCKit case
When earbuds are charging in case
- LED function Indication of LED function
1 blink 0-25% power on the case
2 blink 25-50% power on the case
3 blink 50-75% power on the case
4 blink 75-100% power on the case
LED off Fully charged earbuds
When case is charging by plug
or wireless - LED function Indication of LED function
1 blink 0-25% power on the case
2 blink 25-50% power on the case
3 blink 50-75% power on the case
4 blink 75-100% power on the case
LED on Fully charged case

11
Trouble shooting
1. Reset ROCKit if the earbuds cannot connect to each other.
Reset guide on next page.
2. You can now reconnect ROCKit to your device
3. If you are experiencing issues with stability or connection try
removing the pairing between your device and ROCKit. Choose
Bluetooth settings on your device and forget ROCKit. Pair again
as described in ’Use ROCKit earphones’
4. If ROCKit is not playing music but you device shows it should
be you have to manually choose to play from ROCKit in your
mobile device settings. Please refer to the instruction of your
mobile phone or specic app for further information
5. If ROCKit earbuds do not turn off when placed in the charging
case the case needs to be charged. Please turn off the earbuds
manually by pressing the touch button on one of the earbuds
for 10 seconds and charge your ROCKit case

12
Reset ROCKit
Reset ROCKit
Pairing mode Reset
Connects automatically
Click and hold
Power off
Click and hold
Power on
Click and hold
R
Click five times
TIPS: red and white LED
quickly flash alternately
TIPS: red and white LED slowly flash alternately
L
05
05
R
05
RR
L
05
L L
03
03
After reset, L earbud will automatically
enter the pairing mode with red and white
LED, then the phone can search for earbuds.
ROCKit L
Select on phone
Reset ROCKit
Pairing mode Reset
Connects automatically
Click and hold
Power off
Click and hold
Power on
Click and hold
R
Click five times
TIPS: red and white LED
quickly flash alternately
TIPS: red and white LED slowly flash alternately
L
05
05
R
05
RR
L
05
L L
03
03
After reset, L earbud will automatically
enter the pairing mode with red and white
LED, then the phone can search for earbuds.
ROCKit L
Select on phone

13
Caution
• Please recharge your battery if you cannot turn on the
earbuds
• Please turn off your earbuds after use to get a longer battery
life. Earbuds turn off automatically when placed in the case
• Please use the included USB-C cable to charge ROCKit case
• Please do not change the battery
• Keep the earbuds and case in a safe place free from dust, liq-
uids, and extreme temperatures
• Do not exposure or toss earbuds into re.
• Please do not try to disassemble the earbuds or case
• Please do not use chemicals to clean the product

14
Product Specications:
Bluetooth and True Wireless Earbuds
Bluetooth Solution: Realtek
Bluetooth version: V5.0
Operating distance: 10M
Battery: 590mAh charging case, 2 x 75 earbuds
Charging time: 2 hours
Charging current: 500mA
Music playing time: Up to 8 hours for earbuds without charging
20 hours of playing time added by the charging case
Earbuds call time: Up to 6 hours
Driver Unit: Ø6mm
Frequency Range: 20Hz-20KHz
Impedence: 16±15Ω at 1000Hz
Complaints
Please contact our customer service if you have a complaint or a
pair of broken ROCKit earbuds. If your earbuds has a defect, please
inform your serial number, when you contact us. You will nd the
serial number on the bottom of the charging case.

15
ROCKit Earbuds
Brugermanual

16
Tak!
Tak fordi du valgte ROCKit True Wireless Earbuds fra SACKit. Vi
beder dig læse hele denne brugermanual grundigt, før du tager
ROCKit i brug. Gem venligst brugermanualen, så du altid kan slå op
i den. Vi tager forbehold for fejl i tekst eller billeder og nødvendige
ændringer i de tekniske specikationer. Hvis du oplever tekniske
problemer, beder vi dig kontakte vores kundeservice. Vi håber, du får
stor glæde af din nye ROCKit True Wireless Earbuds.
Indhold i æsken
1. ROCKit earbuds
2. ROCKit wireless charging case
3. Quick start guide
3. USB charging cable
1. Gå til www.sackit.dk/reg
2. Indtast navn, e-mail og produkt*
Registrer dit nye SACKit produkt og få fede fordele.
*Når du registrerer dit produkt, giver du samtykke til at modtage nyhedsbreve fra SACKit.
TILLYKKE med dit nye SACKit produkt!

17
Første brug
Placer dine ROCKit i den medfølgende
opladeræske
Tilslut æsken til strøm via en af 2 muligheder. 1: et strømstik eller 2:
en Qi trådløs oplader, som fx CHARGEit. Oplad i minimum 2 timer
1. 2.

18
Batteri information
• Batteri: genopladeligt Polymer Lithium-Ion Batteri, DC:
3.7V/590mAh for opladeræske, 2 x 75mAh for earbuds
• Strøm: USB DC5V, Anvend det medfølgende USB-C kabel til
opladning af æsken
• Opladningstid: Til første brug venligst sikre at batteriet er fuldt
opladet inden anvendelse. Det skal oplade mere end 3 timer
første gang, og 2 timer ved genopladning
Beskrivelse af produktet Touch knapper
Placering af
venstre earbud
Placering af
højre earbud Opladerstik

19
Korrekt placering af ROCKit earbuds
Placer earbuds i ørerne som vist på billedet nedenfor. Det er vigtigt
at du placerer den indvendige øre-støtte nedad i øret. Du kan dreje
dine earbuds indtil du nder den rette placering.

20
Anvend ROCKit øretelefoner
1. Til første brug: fjern ROCKit earbuds fra opladeræsken. Begge
earbuds vil blinke hvidt i kantens LED
2. Den venstre earbud vil efterfølgende blinke rød/hvid, som
indikerer at ROCKit er i pairing mode og dine earbuds er koblet
sammen via True Wireless Stereo
3. Tænd for Bluetooth på din enhed
4. Vælg “ROCKit L” under Bluetooth indstillinger på din enhed.
Dine earbuds er nu tilkoblet din enhed
5. Du kan nu starte musikken på din enhed
6. ROCKit tænder/slukker automatisk når earbuds indsættes/
udtages af opladeræsken. Manuelt tænd/sluk ROCKit ved at
holde touch knapperne på earbuds nede i 10 sekunder
7. ROCKit vil automatisk parre med sidst tilkoblede enhed
8. For at tilkoble en ny enhed skal du først frakoble tidligere parret
enhed ellers vises ROCKit ikke på den nye enhed