Safavieh Lighting AMIA FLL4043A User manual

PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY
A Wrench 1X E Shade 1X
B Nut 1X F Socket ring 1X
C Lamp base 1X G Bulb 1X
D Lamp body
Model# FLL4043A
Product Dimensions: 21"L X 11"W X 66"H
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for
safe use and installation
* The external flexible cable or cord of this luminaire cannot be replaced
* If the cord is damaged, the luminaire shall be destroyed
Part List and Hardware List
WARNING
This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of electric
shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in the outlet, reverse the plug, if it still
does not fit, contact a qualified electrician. Never use with an extension cord unless the plug can be fully inserted. do not
attempt to defeat this safety feature.
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to the
material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
1/2

Step 1: Screw the Lamp body (D2) onto the Lamp body(D1). Screw
the Lamp body (D3) onto the Lamp body(D2). Screw the Lamp body
(D4) onto the Lamp body(D3).
Screw the Lamp body (D5) onto the Lamp body(D4). Screw the
lamp base (C) onto the Lamp body(D5). Screw the nut (B) onto the
lamp body(D5) with wrench(A),and tighten securely. Be careful not
to twist the power cord and tighten securely.
Step2: Put the lamp shade (E)into the lamp body(D).
Use the ring (F) to lock the shade (E). Insert the bulb(G)
into the socket
Step3: Put the light on a level surface to check if
everything is stable.
PREPARATION
* Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
* If any part is missing or damaged, do not attempt to assemble the product.
* Estimated Assembly Time: 15 minutes.
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email [e-mail]
NOTE: PLEASE USE ON/OFF TYPE"A" BULB MAX 60-WATT OR LED BULB MAX 9-WATT, THERE IS LED 4-WATT BULB IN THE BOX
2/2