Safavieh Lighting ARCHIE IRON FLL4090A User manual

WARNING
This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of electric shock. this
plug will fit in a polarized outlet only one way. if the plug does not fit fully in the outlet, reverse the plug, if it still does not fit, contact a
qualified electrician. Never use with an extension cord unless the plug can be fully inserted. do not attempt to defeat this safety
feature.
CARE AND MAINTENANCE
Model# FLL4090A
Product Dimensions: 13.5"LX11"WX68"H
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate vacuum-brush
attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to the material. Avoid the use
of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use
and installation
* The external flexible cable or cord of this luminaire cannot be replaced
* If the cord is damaged, the luminaire shall be destroyed
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY
A Tube 1X Gmetal shade 1X
BTube 1X HSocket ring 1X
CTube 1X I bulb 1X
DBase 1X JNut 3X
E cord and switch 1X Kmetal shade 1X
FSocket 1X
1/2

PREPARATION
* Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
* If any part is missing or damaged, do not attempt to assemble the product.
* Estimated Assembly Time: 6 minutes.
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email [email protected]
NOTE: PLEASE USE ON/OFF TYPE"A"BULB MAX 60-WATT OR CFL BULB MAX 13-WATT OR LED BULB MAX 9-WATT THERE IS 1PC LED 4-WATT BULB IN THE BOX
Step1: Make sure all parts could be aligned before assemble
.Do not rotate lamp body too hard avoid base screw broken.
Screw the Lamp body (A) onto the Lamp body (B1).Screw the
Lamp body (B1) onto the Lamp body (B2).Screw the Lamp
body (B2) onto the Lamp body (C).
Pulling the cord(E).Screw the Lamp body (C) onto the Lamp
base (D).Put the shade(G) on the socket(F) and locking the
socket ring(H).Insert the bulb(I) into the socket(F).
Be careful not to twist the power cord and tighten securely.
Step2: At last insert the metal shade (K) and tighten the
nut(J).
Step3: Put the light on a level surface to check if every
thing is stable.
2/2