Safavieh Lighting ZAMORA User manual

WARNING
*This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in
the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an
extension cord unless the plug can be fully inserted. do not attempt to defeat this safety feature.
CARE AND MAINTENANCE
Model# TBL4493
Product Dimensions: 13"L X13"W X 23.5"H
*Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an
appropriate vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods
appropriate to the material. Avoid the use of chemicals and household cleaners as they may damage the
finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline
below for safe use and installation
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY
A Lamp base 1X E Harp 1X
B Neck 1X F Shade 1X
C Saddle 1X G Finial 1X
D Socket 1X H Bulb 1X
1/2

PREPARATION
* Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware
contents list.
* If any part is missing or damaged, do not attempt to assemble the product.
* Estimated Assembly Time: 6 minutes.
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email customer[email protected]
PLEASE USE ON/OFF TYPE"A" BULB MAX 60-WATT OR LED BULB MAX 9-WATT,THERE IS LED 9-WATT BULB IN THE BOX
G
D
F
C
B
H
E
A
D
C
B
A
Step1:Pull power cord to connect the Neck (B) to the Base
(A). Screw the Neck (B) onto the Lamp base (A). Be careful
not to twist the power cord and tighten securely
Step2: Insert the Harp (E) into the Saddle (C). Put
the shade (F) on the Harp (E). Then tighten the
Finial (G) into the Harp (E). Insert the bulb (H) into
the socket (D).
Step3：Put the light on a level surface to check if
everything is stable.
2/2