Safavieh Lighting ISMERIA FLL4106A User manual

PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY
A Lamp base 1X G Short Screw 12X
B Wooden Bolt 6X H Lamp holder 1X
C Lamp Foot 3X I Lamp Body 3X
D Long Screw 6X J Bulb 1X
E Allen key 1X K Harp 1X
L Shade 1X
M Finial 1X
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for
safe use and installation
* The external flexible cable or cord of this luminaire cannot be replaced
* If the cord is damaged, the luminaire shall be destroyed
Part List and Hardware List
F Lamp body 3X
WARNING
This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of electric
shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in the outlet, reverse the plug, if it still
does not fit, contact a qualified electrician. Never use with an extension cord unless the plug can be fully inserted. do not
attempt to defeat this safety feature.
Model# FLL4106A
Product Dimensions: 18"L X 18"W X 58.75"H
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to the
material. Avoid the use of chemicals and household cleaners as they may damage the finish.
1/2

Step 1: Insert the Wooden bolt (B) onto the Lamp Base(A)
Screw the Lamp Foot (C) onto the Lamp Base(A) with the Long
screw (D) by the Allen key (E).
Screw the lamp body (F) onto the Lamp Foot(C) with the Short
screw (G) by Allen key (E).
Screw the Lamp Body (I) onto the lamp body (F) with the Short
screw (G) by Allen key (E).
Step2: Insert the Wooden bolt (B) onto the Lamp
Holder (H) . Screw the Lamp Body (I) onto the Lamp
Holder (H) with the Long screw (D) by Allen key (E).
Step3: Insert the Harp (K) into the Saddle (H) . Put the
shade(L) on the Harp(K), then tighten the Finial (M)
into the Harp (K). Insert the bulb(J) into the
Socket(H).
Put the light on a level surface to check if everything
is stable.
PREPARATION
* Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
* If any part is missing or damaged, do not attempt to assemble the product.
* Estimated Assembly Time: 15 minutes.
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email [e-mail]
NOTE: PLEASE USE ON/OFF TYPE"A" BULB MAX 100-WATT OR LED BULB MAX 12-WATT, THERE IS LED 9-WATT BULB IN THE BOX
2/2