Safavieh Lighting TBL4434A User manual

CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an
appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods
appropriate to the material. Avoid the use of chemicals and household cleaners as they may damage
the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline
below for safe use and installation
*The external flexible cable or cord of this luminaire cannot be replaced;
If the cord is damaged, the luminaire shall be destroyed
Model# TBL4434A
Product Dimensions: 13.5"W X 13.5"D X 23.5"H
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to
reduce the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not
fit fully in the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with
an extension cord unless the plug can be fully inserted. do not attempt to defeat this safety feature.
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY
A Lamp base 1X E Shade 1X
B Saddle 1X F Finial 1X
C Socket 1X G Bulb 1X
D Harp 1X
AX1
B
C
D
E
灯座
牛角 X1
饰头
X1
灯体
G灯泡 X1X1
支架 X1
F
X1
灯罩
AX1
B
C
D
E
灯座
牛角 X1
饰头
X1
灯体
G灯泡 X1X1
支架 X1
F
X1
灯罩
AX1
B
C
D
E
灯座
牛角 X1
饰头
X1
灯体
G灯泡 X1X1
支架 X1
F
X1
灯罩
AX1
B
C
D
E
灯座
牛角 X1
饰头
X1
灯体
G灯泡 X1X1
支架 X1
F
X1
灯罩
AX1
B
C
D
E
灯座
牛角 X1
饰头
X1
灯体
G灯泡 X1X1
支架 X1
F
X1
灯罩
AX1
B
C
D
E
灯座
牛角 X1
饰头
X1
灯体
G灯泡 X1X1
支架 X1
F
X1
灯罩
page 1/2

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 6 minutes.
PLEASE USE ON/OFF TYPE"A" BULB MAX 60-WATT OR CFL BULB MAX 13-WATT OR LED BULB MAX 9-WATT
THERE IS LED 9-WATT BULB IN THE BOX.
Step 1
Step2
Step3
Insert the Harp (D) into the Saddle (B).Put the
shade(E) on the Harp(D), then tighten the Finial
(F)into the Harp (D).
Insert the bulb(G) into the socket(C). Put the light on a level surface
to check if everything is
stable.
ENJOY YOUR LAMP
F
A
B
C
D
EG
1.将支架 插入牛角
，把灯罩（E）放在支架（D）上，用饰头（F）旋紧，
步骤:1
将灯泡(G)插入插座(C)
步骤:2 将灯置于水平面上检查
如果一切都是稳定的。
步骤:2
1
F
A
B
C
D
EG
1.将支架 插入牛角
，把灯罩（E）放在支架（D）上，用饰头（F）旋紧，
步骤:1
将灯泡(G)插入插座(C)
步骤:2 将灯置于水平面上检查
如果一切都是稳定的。
步骤:2
3
2
F
A
B
C
D
EG
1.将支架 插入牛角
，把灯罩（E）放在支架（D）上，用饰头（F）旋紧，
步骤:1
将灯泡(G)插入插座(C)
步骤:2 将灯置于水平面上检查
如果一切都是稳定的。
步骤:2
page 2/2