Safavieh Lighting JANSON FLL4081 User manual

PIECE
DESCRIPTION
PICTURE
QUANTITY
PIECE
DESCRIPTION
PICTURE
QUANTITY
Model# FLL4081
Product Dimensions: 20" X12.625"X 60"H
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to
the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE & IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below
for safe use and installation
*The external flexible cable or cord of this luminaire cannot be replaced;
If the cord is damaged, the luminaire shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in the
outlet, reverse the plug, if it still does not fit, contact a qualified electrician. never use with an extension cord
unless the plug can be fully inserted. do not attempt to defeat this safety feature.
Part List and Hardware List
1/2
PIECE
DESCRIPTION
PICTURE
QUANTITY
PIECE
DESCRIPTION
PICTURE
QUANTITY
A Metal frame 1X L sheet iron 1X
B Metal frame 1X M Nut 1X
CConnected Rod 3X N Bulb 1X
D Metal box 1X O Harp 1X
E Screw 2X P shade 1X
F Tube 1X Q Finial 1X
G Tube cover 6X R Glass plate 1X
HSocket
Assembly
1X S Big spannel 1X
I Saddle 1X T Small spannel 1X
J Socket 1X U Screw 8X
K sheet iron 1X
1/2

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 15 minutes.
PLEASE USE ON/OFF TYPE"A" BULB MAX 100-WATT OR CFL BULB MAX 23-WATT OR LED BULB MAX 12-WATT
THERE IS LED 9-WATT BULB IN THE BOX
2/2
Step 1 Step 2 Step3
Make sure all parts could be aligned before assemble
Unpack all parts from cartons carefully. Insert the Harp (O) into the Saddle (I). Put the light on a level surface to check
Fix the Connected rod(C) and the Metal box(D) Put the shade(P) on the Harp(O), then if everything is stable.
on to the Metal frame(A,B)with screws(U) by using Tighten the Finial (Q) into the Harp (O)
the spannel(T). Insert the bulb(N) into the socket(J).
Put tube cover(G) on to the tube (F), Insert the Socket Put the glass plate (R) on the metal farme
assembly(H) into the tube(F).
Put the sheet iron(K),(L) on the threaded of the bottom of tube(F)
insert the tube(F) into middle hole of the metal box(D).
After adjusting the positive direction,then fix it
After adjusting the positive direction,then fix it
with nut(M) by using the spannel(S).
ENJOY YOUR LAMP 2/2