Safavieh Lighting LIT4352A User manual

PIECE DESCRIPTION PICTURE
QUANTITY
PIECE DESCRIPTION PICTURE QUANTITY
B.E.J.L Lamp base 1X N Shade 1X
A base 1X T Flat washer 1X
S Iron sheet 1X U Hex nut 1X
C SCREW 1X V Lever 1X
Model# LIT4352A
Product Dimensions:
L74" X W18"XH84"
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to
the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below
for safe use and installation
*The external flexible cable or cord of this luminaire cannot be replaced;
If the cord is damaged, the luminaire shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in the
outlet, reverse the plug, if it still does not fit, contact a qualified electrician.never use with an extension cord
unless the plug can be fully inserted. do not attempt to defeat this safety feature.
Part List and Hardware List

R Finial 3X P Bulb 1X
F.K SCREW 2X
1. Put the lamp base (A) on a flat surface.
2.Insert tube(B) to iron sheet(S) and base(A) and secure by sliding in
washers(T) and hex nut(U) using lever(V)-(INCLUDED)
3. Insert Arm(E) into coupling(D) and secure it with thumb screw(C)
4. Insert Arm(J) into arm(E) and secure it with screw(F)
5. Insert Arm(L) into arm(J) and secure it with screw(K)
6. Put shade(N) onto socket(M) and secure it with socket ring(O)
7. Put PS panel(Q) onto the shade(N) and secure it with Finial(R)
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 15 minutes.
PLEASE USE ON/OFF TYPE"A" BULB MAX 100-WATT OR CFL BULB MAX 23-WATT OR LED BULB
MAX 12-WATT.THERE IS LED 9-WATT BULB IN THE BOX.
ENJOY YOUR LAMP