Safavieh Lighting Parsen User manual

WARNING
This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of electric shock.
this plug will fit in a polarized outlet only one way. if the plug does not fit fully in the outlet, reverse the plug, if it still does not fit,
contact a qualified electrician. Never use with an extension cord unless the plug can be fully inserted. do not attempt to defeat this
safety feature.
CARE AND MAINTENANCE
Model# FLL4084A
Product Dimensions: 23"*23" X61.5"
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate vacuum-
brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to the material. Avoid
the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe
use and installation
* The external flexible cable or cord of this luminaire cannot be replaced
* If the cord is damaged, the luminaire shall be destroyed
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY
A electric wire 1X G Harp 1X
B.C.D Lamp base 1X H Bulb 1X
E Saddle 1X I Shade 1X
F Socket 1X J Finial 1X
1/2

PREPARATION
* Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
* If any part is missing or damaged, do not attempt to assemble the product.
* Estimated Assembly Time: 6 minutes.
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email [email protected]
NOTE: PLEASE USE ON/OFF TYPE"A" BULB MAX 100-WATT OR CFL BULB MAX 23-WATT OR LED BULB MAX12-WATT THERE IS 1PC LED 9-WATT BULB IN THE BOX
Step 1: Make sure all parts could be aligned before
assemble. Do not rotate lamp body too hard avoid base
screm broken.Fasten tube(C) onto tube(D).Fasten tube(B)
onto tube(C).
Step2: Insert harp (G) into saddle (E).Put the shade(I) on
the Harp(G),then .tighten the Finial (J)into the Harp (G).
Step3: Put the light on a level surface to check if
everything is stable.
2/2