Safavieh Lighting TBL4018A User manual

WARNING
This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of electric
shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in the outlet, reverse the plug, if it still
does not fit, contact a qualified electrician. Never use with an extension cord unless the plug can be fully inserted. do not
attempt to defeat this safety feature.
CARE AND MAINTENANCE
Model# TBL4018A
Product Dimensions: 8"LX8"WX27"H
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate vacuum-brush
attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to the material. Avoid the use of
chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use
and installation
* The external flexible cable or cord of this luminaire cannot be replaced
* If the cord is damaged, the luminaire shall be destroyed
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY
A Lamp base 1X E Bulb 1X
B Tube 1X F Socket 1X
C metal shade 1X G acrylic shade 1X
D triangle clip 1X H cord and switch 1X
1/2

PREPARATION
* Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
* If any part is missing or damaged, do not attempt to assemble the product.
* Estimated Assembly Time: 6 minutes.
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email [email protected]
NOTE:PLEASE USE ON/OFF TYPE"A"BULB MAX 25-WATT OR CFL BULB MAX 9-WATT OR LED BULB MAX 4-WATT THERE IS 1PC LED 4-WATT BULB IN THE BOX
Step1: Put the lamp base(A)on the table.Insert the tube(B)into
the base(A).Install the metal shade(C)on the top of the tube
(B).Insert the bulb(E)into the socket(F).If want to change the
bulb you need hold the shade (E) and pull up it.
Step2: Please hold the triangle clip (D).than put into the
arcylic shade(G).push the switch (H) to make light.
Step3: Put the light on a level surface to check if every
thing is stable.
A
C
E
G
H
2/2