Safavieh Lighting Velezia User manual

PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY
A PlasticAnchors 2X F Lampbody 1X
B MountingPlate 1X G Shade 1X
C TappingScrew 2X H socketring 1X
D GroundScrew 1X I Bulb 1X
EMounting
Screw 4X
WARNING
*Switchoffthemainelectricalsupplyfromthemainfusebox/circuitbreakerbeforeinstallation.
*Inspectitemcarefullybeforeattemptingtoinstall.
*Ifthereisanydamagesorobviousdefects,donotinstall.
*
Item may not be returned once it has been installed.
CAREANDMAINTENANCE
*Tocleantheoutsideofthefixture,useadryorslightlydampenedcleancloth(usecleanwater,nevera
solvent)towipethesurfaceofthefixture.
*Tocleantheinsideofthefixture,firstdisconnectpowertothefixturebyturningoffthecircuitbreakeror
byremovingthefuseatthefusebox.Next,useadryorslightlydampenedcleancloth(usecleanwater,never
asolvent)towipetheinteriorsurfaceofthefixture.
*Donotuseanycleanerswithchemical,solventsorharshabrasives.Useonlyadrysoftclothtodustorwipe
carefully.
NOTICE&IMPORTANTSAFETYINSTRUCTIONS
Model#:SCN4146
ProductDimensions:9.75"LX12.5"DX
12.5"H
Note:2AssemblyOptions
Option1：Portablelampwithplug
Option2：Hardwired
**WERECOMMENDINSTALLATIONOFTHISLIGHTINGFIXTUREBEDONEBYALICENSEDELECTRICIAN**
*Pleasemakesurethatyouhaveallpartsindicatedbeforeyoubeginassemblyofthisitem
*Thisitemshouldbeassembledonasoftsurfacetopreventscratchingthefinishduringassembly
*Toreducetheriskoffire,electricalshockorinjurytopersonsorproperty,pleasefollowtheguidelinebelow
forsafeuseandinstallation
*Theexternalflexiblecableorcordofthislampcannotbereplaced
Ifthecordisdamaged,thelampshallbedestroyed
PartListandHardwareList
Option1：Portablelampwithplug
1/4

NOTE:PLEASEUSETYPE"A"BULBMAX40‐WATTORLEDBULBMAX9‐WATT,THEREIS1PCLED4‐WATTBULBINTHEBOX
PREPARATION
*Beforebeginningassemblyofproduct,makesureallpartsarepresent.Comparepartswithpackagecontentslistandhardwarecontentslist.
*Ifanypartismissingordamaged,donotattempttoassembletheproduct.
*EstimatedAssemblyTime:20minutes.
*ToolsRequiredforAssembly(notincluded):Screwdriver,Junctionbox
*Ifyouarehavingdifficulty,ourfriendlyCustomerCareteamisalwaysheretohelp.Pleaseemail[email protected]
Step1:Placethemountingplate(B)ontheWallandmarkthewallaccording
tothemountingholeandplace2plasticanchorr(A)onthewall.
Step2:use2pcstappingscrew(C)tomountthemountingplate(B)intoplastic
anchors(A).
Step3:FixtheIampbody(F)tothemountingplate(B)withthemounting
screws(E)
Step4:Placetheshade(G)onthelampbody(F),andthenlocktheshade(G)with
thesocketring(H).Lockthebulb(I)tothesocket.
2/4

PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY
A Wirenut 2X G Shade 1X
B MountingPlate 1X H socketring 1X
COutletBox
Screws 2X I Bulb 1X
D GroundScrew 1X J Plasticcover 1X
EMounting
Screw 4X K Protectile cover 1X
F Lampbody 1X
WARNING
*Switchoffthemainelectricalsupplyfromthemainfusebox/circuitbreakerbeforeinstallation.
*Inspectitemcarefullybeforeattemptingtoinstall.
*Ifthereisanydamagesorobviousdefects,donotinstall.
*Itemmaynotbereturnedonceithasbeeninstalled.
Option2：Hardwired
PartListandHardwareList
CAREANDMAINTENANCE
Model#:SCN4146
ProductDimensions:9.75"LX12.5"DX
12.5"H
Note:2AssemblyOptions
Option1：Portablelampwithplug
Option2：Hardwired
*Tocleantheoutsideofthefixture,useadryorslightlydampenedcleancloth(usecleanwater,nevera
solvent)towipethesurfaceofthefixture.
*Tocleantheinsideofthefixture,firstdisconnectpowertothefixturebyturningoffthecircuitbreakeror
byremovingthefuseatthefusebox.Next,useadryorslightlydampenedcleancloth(usecleanwater,never
asolvent)towipetheinteriorsurfaceofthefixture.
*Donotuseanycleanerswithchemical,solventsorharshabrasives.Useonlyadrysoftclothtodustorwipe
carefull
y
.
NOTICE&IMPORTANTSAFETYINSTRUCTIONS
**WERECOMMENDINSTALLATIONOFTHISLIGHTINGFIXTUREBEDONEBYALICENSEDELECTRICIAN**
*Pleasemakesurethatyouhaveallpartsindicatedbeforeyoubeginassemblyofthisitem
*Thisitemshouldbeassembledonasoftsurfacetopreventscratchingthefinishduringassembly
*Toreducetheriskoffire,electricalshockorinjurytopersonsorproperty,pleasefollowtheguidelinebelow
forsafeuseandinstallation
*Theexternalflexiblecableorcordofthislampcannotbereplaced
Ifthecordisdamaged,thelampshallbedestroyed
3/4

NOTE:PLEASEUSETYPE"A"BULBMAX40‐WATTORLEDBULBMAX9‐WATT,THEREIS1PCLED4‐WATTBULBINTHEBOX
Step2:Wireconnection
Step3:Lockthemountingplate(B)ontheoutletboxwiththeoutletbox
screws(C)
Step4:AttachtheLampbody(F)tothemountingplate(B)andsecureitwiththe
mountingscrews(E)
Connectfixtureneutralwire(ribbed)totheoutletboxneutralwire(usuallywhite)using
awirenut.
Connectfixturehotwire(smoothwithmarkings)totheoutletboxhotwire(usually
black)usingawirenut.
CAUTION:Donotreversethehotandneutralconnections
GroundingInstructions:
Wrapgroundwirefromoutletboxaroundgreengroundscrewonmountingbracket,no
lessthan2"fromwireend.Tightengroundscrew.Iffixtureissuppliedwithaground
wire,connecttooutletgroundwirewithawirenut.
PREPARATION
*Beforebeginningassemblyofproduct,makesureallpartsarepresent.Comparepartswithpackagecontentslistandhardwarecontentslist.
*Ifanypartismissingordamaged,donotattempttoassembletheproduct.
*EstimatedAssemblyTime:20minutes.
*ToolsRequiredforAssembly(notincluded):Screwdriver,Junctionbox
*Ifyouarehavingdifficulty,ourfriendlyCustomerCareteamisalwaysheretohelp.Pleaseemail[email protected]
Step1:Cutofftheplugwithscissors,leavingtheexposedwire8"inlength.Use
atooltoremovetheprotective(K).InsertPlasticcover(J)intoLampbodyhole.
J
4/4