Safavieh Lighting ERNIA TBL7005A-SET2 User manual

NOTICE
* Please make sure that you have all parts indicated and they are in good condition before you begin assembly of this item.
Refer to part list and hardware list below for guidance.
* This item should be assembled on a soft surface to prevent scratching the finish during assembly.
* This item may require periodic tightening.
PREPARATION
Model#TBL7005A -SET2
Product Dimensions:
14"Lx14"Wx25.5"H
*Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and
hardware contents list.
* If any part is missing or damaged, do not attempt to assemble the product.
* Estimated Assembly Time:3 minutes.
* If you are having difficulty, our friendly Customer Care team is always here to help.
Please email [email protected].
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to the
material.Avoid the use of chemicals and household cleaners as they may damage the finish.
Part List and Hardware List
PEICE
DESCRIPTION
PICTURE
QUANTITY
PEICE
DESCRIPTION
PICTURE
QUANTITY
A Lamp base 1X E Harp 1X
B Neck 1X F Shade 1X
C Saddle 1X G Finial 1X
D Socket 1X H Bulb 1X
1/2

PREPARATION
* Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list.
* If any part is missing or damaged, do not attempt to assemble the product.
* Estimated Assembly Time: 3 minutes.
Step 1:Install the Harp (E) into the Saddle (C).
Be careful not to twist the power cord.
Step 2:Put the shade(F) on the Harp(E),then if everything is stable.
Tighten the Finial (G)into the Harp (E).
Step 3:Install the light bulb(H) into the socket(D).
2/2