Safavieh Lighting LIANNE PLT4038A-SET2 User manual

Assembly Instruction
CAUTION: Read instruction carefully and turn electricity off at main circuit breaker panel
before beginning installation.
ITEM#:PLT4038A-SET2
Care and Cleaning
To clean the outside of the fixture, use a dry or slightly dampened clean cloth(use clean water,
never a solvent) to wipe the surface of the fixture.
To clear the inside of the fixture, first disconnect power to the fixture by turning off the circuit
breaker or by removing the fuse at the fuse box. Next, use a dry or slightly dampened clean
cloth(use clean water, never a solvent) to wipe the interior surface of the fixture
Do not use any cleaners with chemical, solvents or harsh abrasives. Use Only a dry soft cloth to
dust or wipe carefully.
Estimated Assembly Time:20 minutes
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY
A machine screw 2X F rubber ring 2X
B mounting
screw 2X G Hexagon Nut 2X
Cmounting
bracket 1X H bulb 1X
D ground screw 1X I Glass shade 1X
E wire connector 3X J Lamp body 1X
1/2

Installation
Step 1
Install the mounting bracket(C) to the junction box with machine screw (A)
Step 2 Wire connection
Make wire connections, with wire connectors(E), following the reference chart listed below.
Connect,Hot,Black or Red outlet Supply Wire to: Connect,Neutral,White Outlet Supply Wire to:
Black White
*Parallel Cord(round&smooth) *Parallel Cord(square&ridged)
Clear,Brown,Gold or Black without Tracer(colored stripes) Clear,Brwn,Gold or Black without Tracer(colored stripes)
Insulated Wire(not green)with copper metal conductor Insulated Wire(not green)with Silver metal conductor
*Note: When parallel wire(SPTI&SPTII)is used. The neutral wire is square shaped and
ridged and the hot wire will be round in shape and smooth.(See illustration on left)
Grounding Instructions:
a) For installation in the United States: Wrap ground wire from outlet box around green ground screw(D) on
mounting bracket(C), no less than 2" from wire end. Tighten ground screw(D). If fixture is supplied with a ground
wire, connect to outlet ground wire with a wire connector(E).
b) For installation in Canada: If fixture is supplied with ground wire, wrap ground wire around green grounding
screw on mounting bracket(C). Tighten ground screw(D).
Step 3
Attach the Canopy of the Lamp body(J) to the mounting bracket(C) ，and secure with rubber rings(F) and
screws(B) by turning the Hexagon nut (G) clockwise clockwise .
Step 4
Insert the bulbs (H) into the socket.
PLEASE USE TYPE"A" BULB MAX 25-WATT OR
CFL BULB MAX 9-WATT OR LED BULB MAX 5-
WATT
THERE ARE 1PCS LED 4-WATT BULB IN THE BOX
Step 5
Put the glass shade(I) on the lamp body(J) and fasten clockwise
to fix it.
Step 6
Consult a qualified electrician to ensure correct branch circuit
conductor.
ENJOY YOUR LAMP
A
E
D
C
B
G
H
I
F
2/2