Safavieh LIT4361A User manual

Model# LIT4361A/B
Product Dimensions: 45"L X 26.5"W X
67.5"H
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an
appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate
to the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline
below for safe use and installation
*The external flexible cable or cord of this luminaire cannot be replaced;
If the cord is damaged, the luminaire shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in
the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension
cord unless the plug can be fully inserted. do not attempt to defeat this safety feature.
PIECE DESCRIPTION PICTURE
QUANTITY
PIECE DESCRIPTION PICTURE QUANTITY
A Lamp body 1X D Bulb 3X
B Lamp base 1X E Allen key 1X
C Tube 3X
Part List and Hardware List

A1
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 6 minutes.
PLEASE USE TYPE"A" BULB MAX 60-WATT OR CFL BULB MAX 13-WATT OR LED BULB MAX 9-WATT
THERE ARE 3*LED 9-WATT BULBS IN THE BOX
11123
A2
A3
Step 1 Step2 Step3
Insert the Lamp tube(A2) into the nipple of the top body(A1) Fasten the metal pole in place by turning the Put the light on a level surface to check
Insert the bottom Lamp tube(A3) into the assembled body(A2) screws with Allen Key(E) as diagram. if everything is stable
and pull the wire cable. Insert the bulbs(D) into the sockes.
Fasten the tube(C) into the Lamp base(B).
Screw the assembled Lamp body(A) into the Lamp
Screw the assembled Lamp body(A) into the Lamp
base(B)
ENJOY YOUR LAMP