Safavieh LIT4304A User manual

PIECE DESCRIPTION PICTURE
QUANTITY
PIECE DESCRIPTION PICTURE QUANTITY
A Lamp base 1X E Harp 1X
B1+B2 Lamp Body 1X F Shade 1X
C Neck 1X G Finial 1X
D Socket 1X H Bulb 2X
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to
the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE & IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline
below for safe use and installation
*The external flexible cable or cord of this luminaire cannot be replaced;
If the cord is damaged, the luminaire shall be destroyed
Model# LIT4304A
Product Dimensions: 14"L X 14"W X 35.25"H
Part List and Hardware List
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in the
outlet, reverse the plug, if it still does not fit, contact a qualified electrician. never use with an extension cord
unless the plug can be fully inserted. do not attempt to defeat this safety feature.

Step 1 Step2 Step3
Screw the Lamp body (B1) onto the Lamp base (A) Screw the Harp (E) ont the socket(D) . Put the light on a level surface to check
Screw the Lamp body (B2) onto the Lamp body (B1) Put the shade(F) on the Harp(E), then if everything is stable.
Screw the neck (C) onto the Lamp body (B2) tighten the Finial (G) into the Harp (E)
Screw the socket (D) onto the neck (C) Insert the bulb(H) into the socket(D).
Be careful not to twist the power cord and tighten securely
ENJOY YOUR LAMP
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 6 minutes.
PREPARATION