Safavieh TBL4091A User manual

CARE AND MAINTENANCE
CARE
AND
MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an
appropriate vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods
appropriate to the material. Avoid the use of chemicals and household cleaners as they may damage the
finish.
Model# TBL4091A
Product Dimensions: 10" X 10" X19.5"H
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to
p
revent scratchin
g
the finish durin
g
assembl
y
pggy
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline
below for safe use and installation
*The external flexible cable or cord of this luminaire cannot be replaced;
If the cord is damaged, the luminaire shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in
the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension
cord unless the plug can be fully inserted. do not attempt to defeat this safety feature.
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTIT
Y
PIECE DESCRIPTION PICTURE QUANTITY
A Lamp base 1X C Shade 1X
B Socket 1X D Bulb 1X

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 6 minutes.
PLEASE USE ON/OFF TYPE
"
A
"
BULB MAX 40-WATT OR CFL BULB MAX 13-WATT OR LED BULB MAX 9-WATT
PLEASE
USE
ON/OFF
TYPE A
BULB
MAX
40-WATT
OR
CFL
BULB
MAX
13-WATT
OR
LED
BULB
MAX
9-WATT
THERE IS LED 4-WATT BULB IN THE BOX
CD
B
A
A
Step 1 Step2 Step3
Insert the Shade (C) onto the Socket (B). Insert the bulb(D) into the socket(B). Put the light on a level surface to check
if everything is stable.
ENJOY YOUR LAMP