Safavieh LIT4176A User manual

PIECE DESCRIPTION PICTURE
QUANTITY
PIECE DESCRIPTION PICTURE QUANTITY
A Lamp base 1X H Harp 1X
E Neck 1X I Shade 1X
F Saddle 1X J Finial 1X
G Socket 1X K Bulb 1X
Part List and Hardware List
Model# LIT4176A
Product Dimensions: 14"D X 60 "H
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an
appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate
to the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline
below for safe use and installation
*The external flexible cable or cord of this luminaire cannot be replaced;
If the cord is damaged, the luminaire shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in
the outlet, reverse the plug, if it still does not fit, contact a qualified electrician.never use with an extension
cord unless the plug can be fully inserted. do not attempt to defeat this safety feature.

Step 1 Step2 Step3
Make sure all parts could be aligned before assemble Insert the Harp (H) into the Saddle (F). Put the light on a level surface to check
Do not rotate lamp body too hard avoid base screm broken Put the shade(I) on the Harp(H),then if everything is stable.
Pull cord through lamp base(A) to tighten stem connections, tighten the Finial (J)into the Harp (H)
make sure the screw nut at the bottom of the lamp is tightened.
Insert the bulb(K) into the socket(G).
Fasten tube(B) onto base(A).Fasten tube(C) onto tube(B)
Fasten crystal(D) onto tube(C).
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 6 minutes.
PLEASE USE ON/OFF TYPE"A" BULB MAX 100-WATT OR CFL BULB MAX 23-WATT. THERS IS CFL 13-WATT BULB IN THE BOX.
11
12
3

ENJOY YOUR LAMP