Safeline HL2 User manual
www.safeline-group.com
07. 2019 © 2019 SafeLine and all the SafeLine products and
accessories are copyrighted by law.
An innovation manufactured in Tyresö, Sweden
Telephone accessories
HL2 Manual
HL2 v.2.02 EN
2
SafeLine HL2
HL2 v.2.02 EN
Introduction
Introduction
Technical Data 2
General information 3
Content
Technical data
Supply voltage: 12 - 15 VDC or 20 - 30VDC
Current consumption:
• Idle:
• Active without signal:
• Active with max in signal:
3mA
80 mA
100mA - 1.8A Peak
Size HxWxD: 63 x 81 x 31mm
ATTENTION!
Please ensure that you are using the latest software and manual
for the product. The latest versions are always available for
download at our website: www.safeline-group.com/
Operating
Certicate
Declaration of conformity 7
Installation
Introduction 4
Mounting 4
Jumpers 5
Inductive Loop 6
3HL2 v.2.02 EN
Introduction
This unit was built with state-of-the-art technology and to
generally recognised safety related technical standards currently app-
licable. These installation instructions are to be followed by all people
working with the unit, in both installation and maintenance.
It is extremely important that these installation instructions are made
available at all times to the relevant technicians, engineers or servicing
and maintenance personnel. The basis prerequisite for safe handling
and trouble free operation of this system is a sound knowledge of the
basic and special safety regulations concerning conveyor technology,
and elevators in particular. The unit may only be used for its intended
purpose. Note in particular that, no unauthorised changes or additions
may be made inside the unit or individual components.
Exclusion of liability
The manufacturer is not liable with respect to the buyer of this product
or to third parties for damage, loss, costs or work incurred as a result of
accidents, misuse of the product, incorrect installation or illegal chang-
es, repairs or additions. Claims under warranty are likewise excluded in
such cases. The technical data is the latest available. The manufacturer
accepts no liability arising from printing errors, mistakes or changes.
Declaration of conformity
Download ”The declaration of conformity” at our website:
www.safeline-group.com
Safety Precautions!
- Only trained professionals, who are authorised to work on the equip-
ment, should install and con gure this produc t.
- This quality product is dedicated for the lift industry. It has been
designed and manufactured to be used for its speci ed purpose only.
If it is to be used for any other purpose, SafeLine must be contacted in
advance.
- It should not be modi ed or altered in any way, and should only be
installed and con gured stric tly following the procedures described in
this manual.
- All applicable health and safety requirements and equipment
standards should be considered and strictly adhered to when installing
and con guring this product.
- Af ter installation and con guration this product and the operation
of the equipment should be fully tested to ensure correct operation
before the equipment is returned to normal use.
Electrical and electronic products may contain materials, parts and
units that can be dangerous for the environment and human health.
Please inform yourself about the local rules and disposal collection
system for electrical and electronic products. The correct disposal of
your old product will help to prevent negative consequences for the
environment and human health.
General
information
4
GND
+12-15 V DC
+20-30 V DC
SPK A
SPK B
HL2 v.2.02 EN
Operating
HL2 is an inductive loop transfering sounds to hearing aids by the
connected antenna. The hearing aid receives the vibrations from
the hearing loop and transforms them into regular sounds with a
stronger volume. When in “automatic mode”, the unit is sound ac-
tivated, and returns to standby after a 25 second period of silence.
When in “manual mode” the unit is always active.
Introduction
Blue LED light when
unit is activated
Microphone
sensibility - +
Contact for
inductive
loop antenna
External micro-
phone input
The microphone has to be in close proximity to the emergency
alarm button, and the antenna should be mounted in a central
position on the lift car roof or behind the COP, but not lower than
1.5m above the oor.
NOTE! If the built-in microphone on the back of the HL2 is to be
used, the placement of the unit is important, and the microphone
has to face the inside of the lift car. If mounting the unit on the lift
car roof, an external microphone or speaker input should be used.
For testing the HL2, please use a hearinglooptester with headset or
a eld strength meter.
Mounting
Built in microphone on
the back of the unit.
5
Mic
Aux
Low
High
Auto
Man
HL2 v.2.02 EN
Jumpers Amplication Activation
Activation through internal
or external microphone
Activation through
speaker input
Low amplication of
the signal from speaker
High amplication of the
signal from speaker
Automatic activation
Manual activation
(Always ON)
Jumpers
6
HL2
HL2 v.2.02 EN
Installation
Inductive Loop In order to connect the hearing loop, please do the following:
Inductive
loop
Your partner in lift safety
Antennvägen 10, 13548 Tyresö, Sweden
+46 (0)8-447 79 32, www.safeline-group.com
EU Declaration of Conformity
Product: Hearing/Induction Loop
Type / model: HL1 & HL2
Article no: *HL1, *HL1-SM, *HL2
Manufacturer: SafeLine Sweden AB
Year: 2017
We herewith declare under our sole responsibility as manufacturer that the products referred to
above complies with the following EC Directives:
Directives
Radio Equipment (RED): 2014/53/EU
RoHS 2: 2011/65/EU
Standards applied
EN 303 348:2017 RED: Induction loop systems
EN 81-70:2003/A1:2004 Lift: Accessibility to lifts for persons including persons with disability
EN 12015:2014 EMC: Emission, Electromagnetic compatibility
EN 12016:2013 EMC/Lifts: Immunity, Electromagnetic compatibility
EN 62368–1:2014/AC:2015 LVD: Information Technology Equipment
EN 50581:2012 RoHS: Technical doc. for assessment of restriction of RoHS.
For RED 2014/53/EU, the conformity assessment procedure “Module A” used as described in Annex II.
Firmware used during assessment
SafeLine HL: NA
Tyresö, 2017-04-07
Lars Gustafsson,
Technical Manager, R&D , SafeLine Group
www.safeline-group.com www.safeline-group.com
SafeLine Europe
Industrieterrein 1-8 · 3290 Diest · Belgium
Support: +32 (0)4 85 89 08 95
SafeLine Deutschland GmbH
Kurzgewannstraße 3 · D-68526 Ladenburg · Germany
SafeLine Norway
Solbråveien 49 · 1383 Asker · Norway
SafeLine Denmark
Erhvervsvej 19 · 2600 Glostrup · Denmark
SafeLine Headquarters
Antennvägen 10 · 135 48 Tyresö · Sweden
Support: +46 (0)8 448 73 90
SafeLine Group UK
Unit 47 · Acorn Industrial Park · Crayford ·
Kent · DA1 4AL · United Kingdom
SafeLine is a registered trademark of SafeLine
Sweden AB. All other trademarks, service marks,
registered trademarks, or registered service marks
are the property of their respective owners.
Table of contents
