Safety Vision SV-660H-KIT User manual

COMPOSITION
1INSTALLATION 2
INSTRUCTION
MANUAL
CAMERA
INSTALLATION
2
COMPOSITION
1
CONNECTION WIRING
3
CAMERA INPUT CONNECTOR PIN DESCRIPTION
4
LENS SPECIFICATION
5
FEATURES
6
SPECIFICATIONS
7
20M CABLE (1)
(OPTIONAL)
CAMERA
BRACKET
(1)
SUNSHIELD
MACHINE
SCREW
M5X16L
STAINLESS
(2)
TAPPING
SCREW
M5X16L
STAINLESS
(2)
MACHINE
SCREW
M2X5L
STAINLESS
(4)
NUT
M5XH5
STAINLESS
(2)
Install camera in a location that does not interfere with safe
operation of the vehicle after checking the camera's field of view.
Ask your dealer of contact Safety Vision Technical Support for
advice regarding installation of different types of vehicles.
1 2
B
A
HOW TO ADJUST CAMERA SUNSHIELD & ANGLE
A. Recommended guide line for assembling sunshield.
B. User can mount bracket vertically or horizontally.
1. Install the supplied mounting bracket to the vehicle.
2. Adjust camera's field of view.
3. Adjust sunshield and firmly fasten all screws.
* Adjust sunshield angle to protect lens from sunlight.
* Fasten all screws firmly to avoid product damage during
vehicle operation.
SV-660H-KIT
Owner’s Manual
INSTAL LATION
2
COMPO SITION
1
CONNE CTION W IRING
3
CAMERA INPUT CONNECTOR PIN DESCRIPTION
4
LENS SPECIFICATION
5
FEATUR ES
6
SPECI FICATIO NS
7
SV-660H-KIT
Owner’s Manual
Manual
A/S
DC
!
CAUTION BEFORE USAGE
1. Carefully read this Owner's Manual before installing
and using this product.
2. Product should be installed by an experienced
technician.
3. Do not open or modify the product.
Electrical shock or fire may result, and may damage
a product's waterproof specification.
Contact your dealer or Safety Vision Technical
Support for repair assistance.
4. Do not drop or otherwise expose the product to
extreme shocks. Damage may result.
5. Use regulated voltage.
Safety Vision is not responsible for the application
of excess voltage.
6. Disconnect the vehicle's power during installation,
and only reapply power after the installation is
complete.
7. Only use the supplied accessories to install the
product.
Safety Vision is not responsible for damage as a
result of aftermarket accessories.
8. This product is designed for typical mobile
installations.
Please contact your dealer or Safety Vision Technical
Support regarding atypical or special case installations.
!
SAFETY & CAUTION DURING THE USAGE
8. Do not expose products to electrostatic shock.
9. Do not place excessive pressure on the product case.
10. Ensure all cable connections are free of debris
before use.
11. Do not use solvents such as paint thinner or benzene
to clean the product.
To clean, disconnect power and use only a damp cloth.
1. Ensure all mounts are secure before the vehicle is in
motion.
2. Do not operate the products immediately after
exposure to extreme temperatures.
Refer to the Specifications for proper operating
temperatures.
3. Do not use if a burning smell is sensed or the product
is hot to the touch.
4. Do not cut any cables and ensure they are properly
secured and do not interfere with safe operation of the
vehicle.
5. Ensure the camera and power cables are correctly
installed as indicated in this Owner's Manual.
6. Firmly connect all camera extension cables to ensure
a waterproof connection.
7. Do not obstruct the product's ventilation while in use.
Overheating or fire may result.

CONNECTION WIRING CAMERA INPUT CONNECTOR PIN DESCRIPTION LENS SPECIFICATION
3 4 5
Connect camera and monitor with a appropriate length extension cable.
Connect power and ground to vehicle fusebox.
20M CABLE
(OPTIONAL)
* Secure camera cable connections firmly (with pliers if necessary)
to ensure a strong, waterproof connection.
Ensure male and female connections are installed correctly.
4
3
2
5
1
4P IP CONNECTER
DIAGONAL ANGLE : 140 DEGREE
HORIZONTAL ANGLE : 99 DEGREE
VERTICAL ANGLE : 70 DEGREE
99
HORIZONTAL FIELD OF VIEW
70
VERTICAL FIELD OF VIEW
Description
Video
NC
Audio
Power DC 12V
Ground
Pin No.
1
2
3
4
5
FEATURES
6SPECIFICATIONS 7
Model No.
Image
Picture Element
Image Size
Lens
Synchronization
Horizontal Resolution
Min. Illumination
Signal To Noise Ratio
Power Supply
Power Consumption
Vibration
Impact
IP Factor
Operation Temp.
Case Material
Weight
Dimensions
Supplied Accesories
SV-660H-KIT
Interline transfer type CMOS
300,000 pixels
1/4 Inch
Diagonal Angle : 140 degree
Horizontal Angle : 99 degree
Vertical Angle : 70 degree
Internal
More than 330TV lines
0 Lux
Better than 50dB( at AGC off)
DC 12V
Max.0.8W
7G
100G
IP 69K
-30℃~80℃(-22℉~176℉)
Window: Flat Glass
Body: Aluminum
Approx. 94g
29(W) X 29(H) X 28.5(D)mm
Camera Bracket
Sunshield
Screw Kits
20M Cable (Optional)
Instruction Manual
THIS SYMBOL MEANS DO NOT DISPOSE OF
AS MUNICIPAL WASTE.
RE-USE OR RECYCLE WHEREVER POSSIBLE.
ELECTRICAL / ELECTRONIC COMPONENTS MAY
CONTAIN SUBSTANCES WHICH ARE HARMFUL TO
THE ENVIRONMENT.
FOR ENVIRONMENTALLY SOUND METHODS OF
DISPOSAL, PLEASE CONTACT YOUR LOCAL
GOVERNMENT AUTHORITY.
Part no. 6MNECMS20U8-01
printed in korea
* Design and specifications are subject to change without
notice.
* Patent registered.
* Consult the vehicle manufacturer documentation when determining
an appropriate power source.
1/4" CMOS Miniature camera
Ultra Performance in Low Light
Nor/Mir Image Switching
Bulit in Microphone
Vandal Resistant
Extra-wide Field of View
Wide Operating Temperature Range
IP 69K
Automatic electronic iris