
7
OPERATING YOUR SAGE®PRODUCT
BEFORE FIRST USE
Remove and safely discard any packaging 
material or promotional labels attached to your 
kettle. It is recommended that before rst use  
to ll the kettle to the maximum level, bring  
to the boil by selecting the BOIL 100° button, 
then discard the water.
OPERATION OF YOUR KETTLE
1. Fill with the desired amount of water.
NOTE
Always ll the kettle between the minimum 
(500ml) and maximum (1700ml) marks on 
the water window. 
2. Ensure the lid is closed and locked rmly  
into place. Position the kettle securely onto 
the power base. Insert the power plug into 
a 220–240 power outlet and switch on.
NOTE
If the START/CANCEL button is pressed 
(before selecting a temperature button), 
the START/CANCEL button surround 
will illuminate in red and the 100° button 
surround will illuminate and the kettle will 
start heating.
3. Select the desired temperature.The selected 
button and the START/CANCEL button 
surround will illuminate in white. 
4. Press the START/CANCEL button. Do not 
remove the kettle from the power base during 
operation. Ensure the kettle has switched 
o after the water has boiled or the selected 
temperature has been reached before removing 
the kettle from the power base. If the kettle 
is removed from the power base during 
the KEEP WARM function the kettle will 
automatically switch o.
5. When the kettle has heated the water to the 
selected temperature, 3 beeps will sound.
6. If the KEEP WARM function has been 
selected, the KEEP WARM button surround 
will remain illuminated in red, the selected 
temperature button surround will remain 
illuminated in white, and the kettle will 
maintain the desired setting for 20 minutes. 
SAFETY BOIL DRY PROTECTION
The kettle is tted with a safety device, which 
protects against overheating should the appliance 
be operated with insucient water. If this occurs 
the kettle will stop heating. Switch O at the power 
point and allow kettle to cool before relling.  
The safety device will automatically reset when 
the kettle has cooled down.
Always switch o at the power outlet and unplug 
the appliance from the power outlet before 
cleaning.
REMOVABLE FILTER
The Smart Kettle™Pure features a removable mesh 
lter to remove scale deposits for cleaner water. 
To clean the scale deposits from the lter, remove 
the lter by opening the lid and sliding the lter up 
and out of the kettle.
The lter can be cleaned by placing under 
running hot water and rubbing with a cleaning 
cloth or brush. To replace the lter, simply slide 
the lter down into the slot behind the spout  
of the kettle and push back into position.
NOTE
The lter could become damaged with time, 
so please check regularly and replace 
if found damaged.