SAINT-GOBAIN SageGlass 300-1194-001 Dimensions

The Firewall provides an additional level of network security which monitors incoming and outgoing network
trac, allowing communication only between the SageGlass Symphony™ system and the SageGlass Cloud.
Additionally, if a building management system (BMS) is used, it will connect to the rest of SageGlass Symphony
through the Firewall.
PRODUCT SHEET
FIREWALL
PRODUCT DIMENSIONS
Dimensions Power Requirements
Width Length Height Voltage Frequency Peak Power
11 cm 8 cm 2 cm 100 - 240 VAC 50/60 Hz 10 W
Conditioned space: 0 - 40 °C; 10-90% relative humidity, non-condensing
IC
Part Number Plug
Type Used in countries, such as:
300-1194-001 B Canada, Japan, Mexico, United States
300-1194-002 C Bolivia
300-1194-003 D India
300-1194-004 E Belgium, Czech Republic, France, Poland
300-1194-005 F Germany, Netherlands, South Korea, Spain
300-1194-006 G Kuwait, Qatar, Saudi Arabia, Singapore, UAE, UK
300-1194-007 I Australia, China, New Zealand
300-1194-008 J Switzerland
300-1194-009 K Denmark
300-1194-010 L Italy
300-1194-011 N Brazil
PRODUCT RATINGS
PART NUMBERS
sageglass.com/resources

PACKAGE INCLUDES
1. Firewall
2. Power Adapter
TOOLS AND MATERIALS REQUIRED
1. Screwdriver (if wall mounting)
2. Mounting Screws (if wall mounting)
SYSTEM REQUIREMENTS
The Firewall connects to the SageGlass Symphony system via Ethernet.
• For commercial applications, use Ethernet cables, category CAT5e or above.
• For residential applications, use shielded Ethernet cables, category CAT5e or above.
INSTALLATION
STEP 1: MOUNTING THE FIREWALL (OPTIONAL)
1. Measure distance of mounting holes on the back of the Firewall.
2. Select proper screw length and head diameter for surface to be mounted.
3. Fasten screws into wall with the screwdriver in the orientation to be mounted, leaving enough distance from the
base of the screw head to the wall so that the Firewall can be secured.
4. Place Firewall mounting holes over the screw heads and push down to secure Firewall in place.
STEP 2: CONNECTING TO THE SYSTEM
1. Insert Ethernet cable from the Industrial Computer
(SageGlass Maestro™) into Eth1 (labeled Industrial Computer) .
2. Insert Ethernet cable from the internet source (Cell Modem or
network guest access) to Eth0 (labeled Internet).
STEP 3: CONNECT POWER
1. Insert Power Adapter into the Firewall via the 12 VDC power
port.
2. Insert Power Adapter into Power Outlet.
© SAGE Electrochromics, Inc. All rights reserved.
SageGlass is a registered trademark of SAGE Electrochromics, Inc.
SCS-192.0
sageglass.com /[e-mail]
SageGlass® is the pioneer of the world’s smartest dynamic glass. Electronically
tintable SageGlass tints or clears automatically to optimize daylight levels while
preventing heat and glare without the need for blinds or shades. SageGlass delivers
superior comfort, enhances occupant well-being and saves energy. As part of
Saint-Gobain, SageGlass is backed by more than 350 years of building science
expertise that only the world leader in sustainable environments can provide.
For additional product and instructional information,
visit: sageglass.com/resources
Installations
Patents
WHY SAGEGLASS?
1,000+
Countries
27+
560+