Sakar V40041W User manual
True Wireless Earphones
In the Box
Micro USB
Charging Cable
Take a Look
Power/Action Button
Charging Port
Status Indicator LED Light & Microphone
Charging
(red) = Charging
(blue) = Charged
Powering On/
Bluetooth Pairing
Press & Hold for
3-4 Seconds
Ready For Bluetooth Pairing
(Tap left button to pair both
earphones when using for
the first time)
12:12PM
Bluetooth
Bluetooth
Devices
ON
Now discoverable
(V40041W)
Paired and Ready to Play
Controlling Your Earphones
One Click: Play/Pause/Answer Incoming Call/End Call
Two Rapid Clicks: Redial Last Number
Hold 2-3 Seconds: Reject an Incoming Call
Hold 3-4 Seconds: Power O (When Not Recieving a Call)
Troubleshooting
FOR ITEMS:
V40041W
-If only one earbud is working, press the other earbud to reconnect.
-If earbuds won’t connect, turn o to reset.
-Remember to always charge earbuds.
-Keep earbuds within range of smartphone (30 feet).
?
Charging Earphones
Charge Time = 1 hourum
Truly Wireless Bluetooth Earphones
To Obtain Warranty Service and Troubleshooting Information:
Call 1-800-592-9541
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the
equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
To Obtain Warranty Service and Troubleshooting Information:
Call 1-800-592-9541
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the
equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
