Salamander Designs FPS Series User manual

Salamander Designs FPS-Camera Mount Instructions 501.690 [ 11.18 ]
ASSEMBLY INSTRUCTIONS
FPS - camera mount

Salamander Designs FPS-Camera Mount Instructions 501.690 [ 11.18 ]
PA R TS
ID QTY PART NUMBER DESCRIPTION
A (3) 300-560 1/4-20 Flat Nut
B (2) 300-485 1/4-20 x 1/2” Head Socket Screw
C (2) 300-542 5/16-18 x 1.5” Joint Connector Bolt
D (2) 301-240 Double sided Tape 1X2
E (1) 400-080 5/32” Hex Key
F (1) 301-845 Camera Mounting Post
G (1) 203-740 Single Camera Shelf
H (1) 203-745 Dual Camera Shelf
I (4) 300-470 5/16” Flat Washer
J (4) 300-575 1/4 - 20 x 5/8” Button Head Screw
K (4) 300-468 1/4” SAE Flat Washer
L (1) 303-855 Universal Mounting Bracket
A B C D
EF
G
H
I J K
L

Salamander Designs FPS-Camera Mount Instructions 501.690 [ 11.18 ]
C
B
G (or) H
F
A
 •Fromtherearoftheheader,connectthe2(B)screws
loosely to the 2 (C) Weld Nuts. Do not tighten.
 •Slidetheopensideof(F)MountingPostsovertheWeldNuts
so that the Weld Nuts are captured inside of the Mounting Posts
  WithMountingPostsatdesiredposition,tightenscrewsusing
Hex Key (A)
 •InstallBracket(E)tobottomofMountingPostsandsecure
with screws (F).
 •AlignSpeakermountinglocationswithMountingBracket
slots (fasteners not included).

Salamander Designs FPS-Camera Mount Instructions 501.690 [ 11.18 ]
LIMITED WARRANTY FOR COMMERCIAL VIDEO DISPLAY STANDS AND MOUNTS
Salamander is proud to stand behind our products with industry-leading warranties. Should you ever encounter any problem with your
Salamanderproduct,letusknow.Weareheretomakeitright.1.800.535.5659-860.761.9500
Full warranty including limitations and warranty claim information may be found at www.salamanderdesigns.com/commercial/warranty
(D)
Use double side tape (D) to secure
camerafromslidingoshelf.
C
F
G
A
I
I
J
K
K
A
L
FOR USE ON FPS ELECTRIC LIFT WALL STAND