Sam Ash FUZZZ BOXX Manual
92503014580 revA
SAM ASH FUZZZ BOXX
DIRECTIONS: The Sam Ash Fuzzz Boxx is designed to
make great fuzzzy tones. Simply plug your guitar cable
into the “INPUT” jack and run another cable from the
“OUTPUT” jack to your amplifier. Turn the effect on by
depressing the footswitch.
POWER: The Fuzzz Boxx is powered by one 9V battery.
To replace battery, unscrew the three screws on the bottom
and remove pedal plate. NOTE: For the longest battery
life, do not leave your guitar cable plugged into the Fuzzz
Boxx’s “INPUT” jack when not in use.
SPECIFICATIONS
Input Impedance 6 KΩto 100 KΩ, 1 kHz
Output Impedance* 2 kΩ, 1 kHz
Nominal Output Level* -18 dBV
Signal to Noise Ratio* 87 dBV
Tone Control
High Pass 625 Hz to 2.2 kHz
Maximum Gain 42 dB, 1 kHz
Bypass True Hardwire
Current Draw 1 mA
Power Supply 9 Volts DC
*A-weighted, all controls at mid position
ATTACK control knob gives fuzzily
clear sound
TONE control enables duplication
of almost any other popular fuzz
VOLUME control makes it louder
or softer
