Samsonite SMS-09D1 User manual

Wireless Mouse
SMS-09B1/ SMS-09D1
User Manual

Wireless Mouse
SMS-09B1/ SMS-09D1
Wireless Mouse
SMS-09B1/ SMS-09D1
Warnings
1. Do not disassemble or attempt to repair the unit
2. Do not expose it to liquid, humidity, moisture or
temperatures outside the specified operation
range of 0°C~40°C.
3. Caution: Risk of explosion if battery is replaced
by an incorrect type. Dispose of used batteries
according to the instructions.
4. USB receiver powered by PC with USB 2.0 port.
5. For use only with AAA battery
Correct Disposal of this product
This marking indicates that this product should not be
disposed with other household wastes throughout the EU.
To prevent possible harm to the environment or human
health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material
resources. To return your used device, please use the
return and collection systems or contact the retailer
where the product was purchased. They can take this
product for environmental safe recycling.

Wireless Mouse
SMS-09B1/ SMS-09D1

Wireless Mouse
SMS-09B1/ SMS-09D1
Package Content
Before to start the product installation please check if in the bo there
are the following items:
 Mouse
 USB Nano Receiver
 1 Alkaline batteries (Size AAA)
 Carrying Pouch
 Quick Start Guide
 Warranty Card
If one or more item should be missed or damaged please contact your
local dealer for warranty replacement.
System Requirements
In order to use the product it is necessary a computer with the following
specifications:
 PC IBM® or compatible. / One USB port. / Operating System:
Windows® 2000, Windows® XP or Windows® Vista.

Wireless Mouse
SMS-09B1/ SMS-09D1
NOTE: The computer must satisfy the operating system requirements. For
more information about it please check the Windows® manuals
or the help on-line.
Safety instructions
This device complies with Part 15 of the FCC Rules.
Operation is su ject to the following two conditions: (1)
This device may not cause harmful interference, and (2)
This device must accept any interference received,
including interference that may cause undesired
operation.
Warning: Changes or modifications to this unit not
expressly approved y the party responsi le for
compliance could void the user's authority to operate the
equipment.
NOTE: This equipment has een tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasona le protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio

Wireless Mouse
SMS-09B1/ SMS-09D1
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will
not occur in a particular installation. If this equipment
does cause harmful interference to radio or television
reception, which can e determined y turning the
equipment off and on, the user is encouraged to try to
correct the interference y one or more of the
following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation etween the equipment
and receiver.
•Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
•Consult the dealer or an experienced radio/TV
technician for help.
 This device meets the requirements of the applicable European
directives. The Declaration of Conformity (DoC) is available at
http://www.me-ontravel.com

Wireless Mouse
SMS-09B1/ SMS-09D1
Warranty – Terms and conditions
Please kindly refer to the include warranty card for more details.
Nortek reserves the right to modify or cancel the present programme

Wireless Mouse
SMS-09B1/ SMS-09D1

Wireless Mouse
SMS-09B1/ SMS-09D1

Wireless Mouse
SMS-09B1/ SMS-09D1
Usuage
I. Battery Installation
1. Unlock the ottom cover of the mouse y
pushing the switch to the unlock position as
show in the figure on the previous page
2. Insert one AAA battery,
matching the polarity between the battery and the battery
compartment.
3. Close the bottom cover and
lock it by pushing the switch to the lock position
II. Connection
1. Unlock the ottom cover of the mouse y
pushing the switch to the unlock position as
show in the figure on the previous page
2. Take out the wireless dongle
which has been stored under the mouse
3. Close the bottom cover and
lock it by pushing the switch to the lock position
4. Connect the wireless dongle a
USB port of your computer (the computer would run
hardware installation when you first use the product)

Wireless Mouse
SMS-09B1/ SMS-09D1
5. Push the power switch on the
bottom part of the mouse to ON or ON+LED (if you want
LED lights on) to power on the mouse
6. Wait until the installation
completed, you mouse should work properly.
Note: push the power switch on the bottom part of the mouse
to OFF position if you are not going to use the mouse to save
power and to ensure higher product durability.

Wireless Mouse
SMS-09B1/ SMS-09D1