Samsung SBP-300WM1 User manual

ENG
Wall Mount Adaptor
SBP-300WM1
Product Overview
Package
This product is used to install the Smart Dome Camera and Anti Vandal Camera
on a wall or vertical structure.
Installation Precautions
`Make sure that the installation place can endure at least 4 times of the total weight of the Wall
Mount Adaptor, Hanging Mount Adaptor, and Camera.
`This product is designed to use M10 Anchor Bolts (Nuts) for the installation.
`For a concrete wall, it is recommended to use M10 Anchor Bolts (Nuts) along with plain and
spring washers.
`Each anchor bolt must be capable of withstanding an extraction force of 700 kg.
`When installing the product outdoors, use interlocking devices made of stainless steel.
`You can install the Wall Mount Adaptor directly on the wall or mount it on the Corner Mount
Adaptor (SBP-300KM) or Pole Mount Adaptor (SBP-300PM) before installation.
WALL MOUNT ADAPTOR

Installation
1
Pull out the external power cable, BNC cable and communications cable
(for connecting to the “camera”) through the rear of the Wall Mount
Adaptor into the Pipe.
`Then, it is recommended to keep the cables in a distance of about 100 mm from
the pipe.
2
Secure the Wall Mount Adaptor to the wall, corner or pole using the
“Anchor Bolts or Nuts (M10)”.
`When installing the product on a corner of the wall, use the Corner Mount Adaptor
(SBP-300KM) and use the Pole Mount Adaptor (SBP-300PM) for a pole.
`When installing the product on a wall, mark and drill 4 holes into the Wall Mount
Adaptor and insert the Anchor Bolts or Nuts (M10) before installation.
Product Specifications
•Weight : 625g
•Material : Aluminum
•Operation temp. : -50°C~60°C
•Operation hum. : 0~100%
80
150
112
183
207,5
52
11
Hole:
Product Outline
3
Mount the Camera set on the Pipe.
`Install the camera according to the camera's installation guide.
Anchor Bolts
Wall Mount Adaptor
Camera set
