Samsung Lazett Combo SCX-4216F User manual

P RINTING F ROM A M ACINTOSH
A.6
Using Advanced Printing Features
The SAMSUNG SPL II Printer window contains five categories of
advanced properties. Listed below is the name of each property.
- Darkness/Quality
- Layout
- Color
- Background Printing
- Paper Source
The following figures display each property in the SAMSUNG
SPL II Printer window.
Darkness/Quality
Layout
Select the
print
darkness.
Select the print
resolution.
Select the number of pages
you want to print on one
sheet of paper. The pages
will appear decreased in
size and arranged on the
sheet.
To print the border
of each page, check
this box.

P RINTING F ROM A M ACINTOSH
A.7
A
Color
Background Printing
Select the grayscale mode.
 Black&White  Grayscale
Turns background
printing on or off.
Select priority for your print job in the queue of jobs waiting
to print, click one of the following:
• Urgent: to print before any Normal priority job.
• Normal: to print in the order the job is received.
• Print at: to print at the specific time you enter in the day
and time in the fields to the right.
• Put document on hold: to hold the print job in the print
queue until you are ready to release it.

P RINTING F ROM A M ACINTOSH
A.8
Paper Source
Select the corresponding paper source.
If Auto Select is set, the machine
automatically selects the print material
from the paper tray, according to the
following order: the Bypass tray and the
paper tray.

B
SPECIFICATIONS
This chapter includes:
• General Specifications
• Scanner and Copy Specifications
• Printer Specifications
•Facsimile Specifications (For SCX-4216F)
• Paper Specifications

S PECIFICATIONS
B.2
General Specifications
Item Description
Automatic document
feeder
(for SCX-4116/4216F)
Up to 30 sheets (20 lb, 75 g/m
2
)
ADF Document size
(for SCX-4116/4216F)
Width: 142 to 216 mm (5.6 to 8.5 inches)
Length: 148 to 356 mm (5.8 to 14 inches)
Paper input capacity Paper tray: 250 sheets (weight: 75 g/m
2
, 20 lb)
Bypass tray: 1 sheets (weight: 75 g/m
2
, 20 lb)
Paper output capacity Front output tray: 150 sheets (face down)
Rear output slot: 1 sheet (face up)
Paper type
Paper tray: Plain paper (60 ~ 90 g/m
2
, 16 ~ 24 lb)
Bypass tray: Plain paper, Transparencies, Labels, Card,
Post card, Envelopes (60 ~ 120 g/m
2
, 16 ~ 32 lb)
Consumables 1-piece toner cartridge system
Power requirements 100 ~ 127 VAC, 50/60 Hz, 4.5A
220 ~ 240 VAC, 50/60 Hz, 2.5A
Power consumption
Sleep mode: 19 W
Standby mode: 85 W(100 ~ 127 VAC) / 95 W(220 ~ 240 VAC)
Average: 350 W
Noise
Warm-up: 50 dB
Standby mode: 35 dB
Printing: 55 dB
Warm-up Time 30 seconds
Operating conditions Temperature: 50
o
F to 89
o
F (10
o
C to 32
o
C)
Humidity: 20 % to 80 % RH
LCD 16 characters x 2 lines
Toner cartridge life 3,000 pages (for starter, 1,000 pages) @ IDC 5 %
coverage
SET dimension
(W x D x H)
SCX- 4116/ 4216F: 474 x 436 x 417 mm
SCX-4016: 474 x 436 x 353 mm

S PECIFICATIONS
B.3
B
Scanner and Copier Specifications
Weight
Net: 13 (SCX-4116/4216F)/11.7 (SCX-4016) Kg
(including consumables)
Gross: 17 (SCX-4116/4216F)/15.7 (SCX-4016) Kg
(including consumables, accessories and package)
Package Weight Paper: 2.7 Kg
Plastic: 0.7 Kg
Item Description
Compatibility TWAIN standard
Scanning method Sheet-fed and Flat-bed CCD (Charge Coupled Device)
module
Resolution Optical: 600 dpi (Mono and Color)
Enhanced: 4,800 dpi
Effective scanning length Platen: 297 mm (11.7 in.)
ADF (for SCX-4116/4216F): 356 (14 in.)
Effective scanning width 8.2 inches (208 mm)
Color bit depth Internal: 32 bit
External: 24 bit
Mono bit depth 1 bit for Text mode
8 bit for Gray mode
Scan speed (Text mode) Platen: 23 seconds
ADF (SCX- 4116/4216F): 25 seconds
Copy speed 17 copies per minute (Letter)
Paper size Letter, A4, Legal
Copy resolution
Platen: 600 x 300 (Text, Mixed) / 600 x 600 (Photo)
ADF (for SCX-4116/4216F): 600 x 300 (Text, Mixed,
Photo)
Zoom rate Platen: 25 ~ 400 %
ADF (for SCX-4116/4216F): 25 ~ 100 %
Item Description

S PECIFICATIONS
B.4
Printer Specifications
Multiple copies 99 pages
Grayscale 256 levels
Item Description
Printing method Laser Beam Printing
Printing speed 17 pages per minute (Letter)
Paper size
Paper tray: Letter, A4, Legal, Folio, A5, A6
Bypass tray: Letter, Legal, A4, Folio, Executive, A5, A6,
A6 card, Post Card 4x6, HagaKi, Envelope 7-3/4,
Envelope 9, Envelope 10, Envelope DL, Envelope C5,
Envelope C6, Envelope B5
* Min.: 76 x 127 mm (3 x 5 in.)
Max.: 216 x 356 (8.5 x 14 in.)
Print resolution 600 x 600 dpi
Emulation SPL (GDI)
PC Interface IEEE 1284, USB 1.1
Compatibility Windows 95/98/2000/NT 4.0/Me/XP
Macintosh 8.6 or higher
First printing time Standby mode: 12 seconds
Power save mode: 42 seconds
Item Description

S PECIFICATIONS
B.5
B
Facsimile Specifications (For SCX-4216F)
Item Description
Compatibility ITU-T Group 3, ECM
Applicable line Public Switched Telephone Network (PSTN) or behind
PABX
Data coding MH/MR/MMR (ECM Mode) and JPEG for color fax
transmission
Modem speed 33600/28800/21600/19200/14400/12000/9600/
7200/4800/2400 bps with fall back
Transmission speed
Approx. 3 seconds/page
* Transmission time applies to memory transmission of
text data with ECM compression using only ITU-T
No.1 Chart.
Scanning speed
Platen: approx. 3 seconds/letter (at standard fax
resolution mode)
ADF: approx. 5 seconds/letter (at standard fax
resolution mode)
Maximum document length Platen: 297 mm
ADF: 1.5 m
Paper size Letter, A4, Legal
Resolution
Standard: 203 x 98 dpi
Fine: 203 x 196 dpi
Super Fine: 300 x 300 dpi / 203 x 392 dpi
Photo: 203 x 196 dpi
Color: 200 x 200 dpi
User Memory 4 MB (320 pages)
Halftone 256 levels
Auto dialer Speed dialing (registration for 100 numbers)

S PECIFICATIONS
B.6
Paper Specifications
Overview
Your machine accepts a variety of print materials, such as cut-sheet paper (including
up to 100% recycled fiber content paper), envelopes, labels, transparencies and
custom-size paper. Properties, such as weight, composition, grain and moisture
content, are important factors affecting the machine’s performance and the output
quality. Paper that does not meet the guidelines outlined in this User’s Guide can
cause the following problems:
•Poor print quality
• Increased paper jams
• Premature wear on the machine.
NOTES :
• Some paper may meet all of the guidelines in this guide and still not produce
satisfactory results. This may be the result of improper handling, unacceptable
temperature and humidity levels, or other variables over which Samsung has no
control.
•Before purchasing large quantities of paper, insure the paper meets the requirements
specified in this User’s Guide.
CAUTION : Using paper that does not meet these specifications may cause problems,
requiring repairs. These repairs are not covered by the Samsung warranty or service
agreements.
Supported Sizes of Paper
Paper Dimensions
1
Weight Capacity
2
Letter
8.5 X 11 in.
(216 X 279 mm)
• 60 to 105 g/m
2
bond (16 to
28 lb) for the
paper tray
• 60 to 120 g/m
2
bond (16 to
32 lb) for the
Bypass tray
• 250 sheets of 75
g/m
2
bond (20
lb) paper for the
paper tray
• 1 sheet of paper
for the Bypass
tra
y
A4
210 X 297 mm
(8.3 X 11.7 in.)
Executive
7.25 X 10.5 in. (191
X 267 mm)
Legal
8.5 X 14 in.
(216 X 356 mm)
Folio
216 X 330 mm
(8.5 X 13 in.)

S PECIFICATIONS
B.7
B
NOTE :You may experience jams when using print materials with a length of less than
127 mm (5 in.). For optimum performance, ensure that you are storing and handling the
paper correctly. Please refer to “Printer and Paper Storage Environment” on page B.9.
Guidelines for Using Paper
For the best result, use conventional 75 g/m
2
(20 lb) paper. Ensure that the paper is
of good quality, and free of cuts, nicks, tears, spots, loose particles, dust, wrinkles,
voids, and curled or bent edges.
If you are unsure of what type of paper you are loading, such as bond or recycled
paper, check the label on the package.
The following problems may cause print quality deviations, jamming or even damage
to the printer.
Minimum size (custom)
76 x 127 mm
(3 x 5 in) 60 to 120 g/m
2
bond (16 to
32 lb)
• 1 sheet of paper
for the Bypass
tray
Maximum size (Legal)
216 x 356mm
(8.5 x 14 in)
Transparency
Same minimum and
maximum paper sizes
as listed above.
138 to 146 g/m
2
Labels
120 to 150 g/m
2
Cards
90 to 163 g/m
2
Envelopes
75 to 90 g/m
2
1. The machine supports a wide range of media sizes. See “Size, Input Sources and Capacities” on
page 3.2.
2. Capacity may vary depending on print materials’ weight and thickness, and environmental conditions.
Symptom Problem with Paper Solution
Poor print quality or toner
adhesion, problems with
feeding
Too moist, too rough, too
smooth or embossed;
faulty paper lot
Try another kind of paper,
between 100 ~ 400
Sheffied, 4 ~ 5 %
moisture content.
Dropout, jamming, curl Stored improperly Store paper flat in its
moisture-proof wrapping.
Increased gray background
shading/printer wear Too heavy Use lighter paper, use the
rear output slot.
Excessive curl problems
with feeding
Too moist, wrong grain
direction or short-grain
construction
• Use the rear output slot.
• Use long-grain paper.
Paper Dimensions
1
Weight Capacity
2

S PECIFICATIONS
B.8
NOTES:
• Do not use letterhead paper printed with low-temperature inks, such as those used in
some types of thermography.
• Do not use raised or embossed letterhead.
•The printer uses heat and pressure to fuse toner to the paper. Insure that any colored
paper or preprinted forms use inks that are compatible with this fusing temperature
(200 °C or 392 °F for 0.1 second).
Paper Specifications
Jamming, damage to
printer Cutouts or perforations Do not use paper with
cutouts or perforations.
Problems with feeding Ragged edges Use good quality paper.
Category Specifications
Acid Content 5.5 pH or lower
Caliper 0.094 ~ 0.18 mm (3.0 ~ 7.0 mils)
Curl in Ream Flat within 5 mm (0.02 in.)
Cut Edge Conditions Cut with sharp blades with no visible fray.
Fusing Compatibility
Must not scorch, melt, offset or release hazardous
emissions when heated to 200 °C (392 °F) for 0.1
second.
Grain Long Grain
Moisture Content 4 % ~ 6 % by weight
Smoothness 100 ~ 400 Sheffied
Symptom Problem with Paper Solution

S PECIFICATIONS
B.9
B
Paper Output Capacity
Printer and Paper Storage Environment
Paper storage environmental conditions directly affect the feed operation.
Ideally, the machine and paper storage environment should be at or near room
temperature, and not too dry or humid. Remember that paper is hygroscopic; it
absorbs and loses moisture rapidly.
Heat works with humidity to damage paper. Heat causes the moisture in paper to
evaporate, while cold causes it to condense on the sheets. Heating systems and air
conditioners remove most of the humidity from a room. As paper is opened and used,
it loses moisture, causing streaks and smudging. Humid weather or water coolers can
cause the humidity to increase in a room. As paper is opened and used it absorbs any
excess moisture, causing light print and dropouts. Also, as paper loses and gains
moisture it can become distorted. This can cause paper jams.
Care should be taken not to purchase more paper than can be used in a short time
(about 3 months). Paper stored for long periods may experience heat and moisture
extremes, which can cause damage. Planning is important to prevent damage to
large supplies of paper.
Unopened paper in sealed reams can remain stable for several months before use.
Opened packages of paper have more potential for environment damage, especially
if they are not wrapped with a moisture-proof barrier.
The paper storage environment should be properly maintained to ensure optimum
performance. The required condition is 20 to 24 °C (68 to 75 °F), with a relative
humidity of 45 % to 55 %. The following guidelines should be considered when
evaluating the paper’s storage environment:
•Paper should be stored at or near room temperature.
• The air should not be too dry or too humid.
• The best way to store an opened ream of paper is to rewrap it tightly in its
moisture-proof wrapping. If the machine environment is subject to extremes,
unwrap only the amount of paper to be used during the day’s operation to prevent
unwanted moisture changes.
Output Location Capacity
Face-down output tray 150 sheets of 75 g/m
2
bond (20 lb) paper
Face-up output slot 1 sheet of 75 g/m
2
bond (20 lb) paper

S PECIFICATIONS
B.10
M EMO

INDEX
Numerics
2/4-up, special copy 4.11
2-side, special copy 4.10
A
ADF, load 4.4
auto fit, special copy 4.8
B
bypass tray, use 3.8
C
cancel
copy
4.3
print 5.5
scan 6.5
CCD power save mode, use 1.20
clone, special copy 4.9
collation, special copy 4.10
connection
AC power
1.17
parallel 1.16
telephone line cord 1.15
USB 1.16
consumables 7.10
contrast, copy 4.6
control panel 1.7
copy
contrast
4.6
default setting, change 4.13
from ADF 4.4
from document glass 4.2
image 4.6
number of pages 4.7
special features 4.8
time out, set 4.14
D
display language, change
control panel
1.17
document
jam, clear
8.2
load in ADF 4.4
load on document glass 4.2
document glass
clean
7.4
load 4.2
drum, clean 7.9
E
error messages 8.10
F
Favorite setting, use 5.6
fit to page
copy
4.8
print 5.11
front output tray, use 3.5
G
graphic properties, set 5.20
H
help, use 5.6
I
install
Macintosh software
A.2
toner cartridge 1.10
Windows software 2.4

J
jam, clear
document
8.2
paper 8.4
M
Macintosh
common problems
8.25
document, print A.4
driver, install A.2
memory, clear 7.2
MFP driver
install
2.4
uninstall 2.9
N
network printer, set 5.22
n-up (multiple pages per sheet)
copy
4.11
print 5.8
O
orientation, print 5.3 , A.4
output location, select 3.4
overlay, use 5.16
P
paper guidelines 3.3
paper jam, clear 8.4
paper level indicator 3.7
paper load
in bypass tray
3.8
in paper tray 1.12
paper load capacity 3.2
paper properties, set 5.7
paper size, set
bypass tray
3.10
paper tray 1.18
print 5.7 , A.4
paper source, set 5.8 , A.8
paper type, set
bypass tray
3.10
paper tray 1.18
print 5.8 , A.4
parallel, connect 1.16
poster
copy
4.12
print 5.12
power save mode, use 1.19
print order, set 5.4
print resolution 5.20 , A.6
printer driver
install in Windows
2.4
installin Macintosh A.2
uninstall 2.9
printing
fitting to a selected paper size
5.11
from Macintosh A.4
from Windows 5.2
multiple pages on one sheet 5.8
posters 5.12
reduced or enlarged document
5.10
using overlays 5.16
watermarks 5.13
problem, solve
copying
8.23
error messages 8.10
fax 8.21
paper feeding 8.13
printing 8.14
printing quality 8.17
scanning 8.24
problem, solving
Macintosh
8.25
R
rear output slot, use 3.5
reduced/enlarged
copy
4.7
print 5.10
S
scan driver
install
2.4
uninstall 2.9
SmarThru
install
2.4
uninstall 2.10
specifications
facsimile
B.5
general B.2
paper B.6
printer B.4
scanner and copier B.3
system requirements
Macintosh
A.2
Windows 2.3

T
tel line, connect 1.15
toner cartridge
install
1.10
life 7.6
redistribute 7.6
replace 7.7
toner save mode, use 1.19
TWAIN, scan 6.5
U
unistall
MFP driver
2.9
SmarThru 2.10
using CD-ROM 2.12
USB
connect
1.16
mode, change 8.16
USB driver, install
in Windows 98/Me
2.8
W
watermarks, use 5.13
Z
zoom rate, copy 4.7

SCX-4216F

CONTENTS
i
C
ONTENTS
Chapter 1:
G
ETTING
S
TARTED
Control Panel Functions ....................................... 1.2
Setting the Machine ID ......................................... 1.4
Entering Characters Using the Number Keypad ... 1.5
Setting the Date and Time .................................... 1.7
Changing the Clock Mode ................................. 1.8
Setting Sounds .................................................... 1.8
Speaker Control, Ringer, Key Sound and
Alarm Sound .................................................. 1.9
Speaker Volume ............................................. 1.9
Setting the Dial Mode .......................................... 1.10
Using the Toll Save Mode ..................................... 1.11
Setting up the Fax System ................................... 1.12
Changing the Fax Setup options ...................... 1.12
Available Fax Setup Options ............................ 1.12
Chapter 2: G
ENERAL
F
AX
F
UNCTIONS
Sending a Fax ..................................................... 2.2
Preparing Documents for Faxing ....................... 2.2
Loading an Original Document .......................... 2.2
Adjusting the Document Resolution ................... 2.4
Sending a Fax Automatically ............................ 2.5
Sending a Fax Manually ................................... 2.6
Confirming Transmission ................................. 2.6
Automatic Redialing ........................................ 2.7
Receiving a Fax ................................................... 2.7
About Receiving Modes .................................... 2.7
Loading Paper for Receiving Faxes .................... 2.7
Receiving Automatically in the Fax Mode ............ 2.8
Receiving Manually in the Tel Mode ................... 2.8
Receiving Faxes in the Memory ......................... 2.8

CONTENTS
ii
Chapter 3:
A
UTOMATIC
D
IALING
Speed Dialing ...................................................... 3.2
Storing a Number for Speed Dialing .................. 3.2
Sending a Fax using a Speed Number ................ 3.3
Group Dialing ...................................................... 3.4
Setting Group Dial .......................................... 3.4
Editing Group Dial Numbers ............................. 3.5
Sending a Fax Using Group Dialing
(Multi-address Transmission) ........................... 3.6
Searching for a Number in the Memory ................... 3.7
Searching Sequentially through the Memory ....... 3.7
Searching with a Particular First Letter .............. 3.7
Printing a Phonebook List ...................................... 3.8
Chapter 4:
O
THER
W
AYS TO
F
AX
Redialing ............................................................ 4.2
Sending Broadcasting Faxes .................................. 4.2
Sending a Delayed Fax ......................................... 4.3
Sending a Priority Fax .......................................... 4.5
Adding Documents To a Scheduled Fax ................... 4.7
Canceling a Scheduled Fax .................................... 4.8
Chapter 5:
A
DDITIONAL
F
EATURES
Using the Secure Receiving Mode ........................... 5.2
Printing Reports .................................................. 5.3
Using Advanced Fax Settings ................................. 5.5
Changing Setting Options ................................ 5.5
Advanced Fax Setting Options .......................... 5.6
Using the Remote Control Panel ............................. 5.7

CONTENTS
iii
M EMO