Samsung NX10 Quick start guide




1. Before upgrading the firmware
●Makesureyouusefullychargedbatteries.
Ifcameramalfunctioniscausedduringafirmwareupgradeforthereasonsgivenabove,themainboard
mayhavetobeservicedbyaSamsungservicecentre,whichmayresultinmajorrepaircharges.
●Beforeupgradingthefirmware,makesurethatyouformatthememorycardonyourPCorcameraand
thendownloadthenecessaryfirmwarefile.
●Downloadthefirmwarefileintotherootdirectoryofthememorycard.
●Donotoperatethecamera,removethebatteries,orcutthepowerwhileupgradingfirmware.Operatethe
cameraonlyafterthefirmwareupgradeiscomplete.

2. Improvement version of 01.25
●Systemstabilization
3. How to upgrade firmware?
1) Download the firmware file into the root directory of the SD memory card.
2) Insert the SD card on which the firmware file is to be saved.
3) Press the menu button.
4) Move to "Setup Menu 3" (Press the left button of 4-wat key.)
5) Select the "Firmware Update"
(After pressing the left button of 4-way key, press the OK button for 1 time.)
6) Select the "Body Firmware". (Press the OK button for 1 time)
 7) Select "Yes". (After pressing the down button of 4-way key, press the OK button for 1 time.)
8) The upgrading progress bar will be increased, then after finishing it, camera will turn off

※Shouldyouneedfurtherdetailedinformation,orifyouexperiencedifficultyinupgradingfirmware,donot
proceedwiththeprocessonyourown.VisitaSamsungservicecentrenearyou.