Samsung SPF-72H User manual

/
Hardware FeaturesSafety Instruction
Power Button
Indicator [ ]
Up Button [ ]
Down Button [ ]
Enter Button [
]
Play / Pause Button [ ]
Menu Button [ MENU ]
Left Button [ ]
Right Button [ ]
Back Button [ BACK ]
6TFSNBOVBM
Not supplied
4%..$.49%
.FNPSZ$BSE
1PXFS$PSE %$1PXFS"EBQUFS
64#$BCMF"#UZQF
Package Content Connecting Digital Photo Frame
SPF-72H
Digital Photo Frame
Connect the power adapter to the terminal at the back of the
product.
Connect the power cord to the DC power adapter.
Connect the up stream terminal of your digital photo frame to your PC
with the USB cable provided with the product.
Make sure to use the USB cable provided with the product.
Connect the down stream terminal of your digital photo frame to an
external device with a USB cable.
The Kensington lock is a device used to physically fix the system when
using it in a public place.
(The locking device has to be purchased separately.)
For using a locking device, contact where you purchase it.
Please check all items are contained in your delivered package.
If there is any one omitted, contact your local distributor where you purchased your
product. If you want to purchase an optional item, contact a service center.
Never use other power adapter than the DC power adapter provided with the product.
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care centre.
User manual
Shows the power status.
When the product is powered on, the power light
turns on. Turns the product on or off.
Return to the previous menu.
Moves the selected frame in the menu up.
Moves the selected frame in the menu to the left.
Moves the selected frame in the menu to the
right.
Moves the selected frame in the menu down.
Selects a file to play back, a setting on the menu,
or an item.
Play / Pause during playback
Displays the menu at the bottom left corner of
the screen.
SD/MMC/MS/XD
Card Slot
Kensington lock
USB Down Stream
Terminal
USB Up Stream
Terminal
Power Terminal
Stand
You can insert a SD/MMC/MS/XD card into this slot to
view and use the contents stored on it.
SD/MMC cards larger than 2 GB may not be supported.
Sliding Prevention
Holder
Supports the product so that it stays firmly in place on
slippery surfaces.
The Kensington lock is a device used to physically fix the
system when using it in a public place.
Connect an external device to this terminal with a USB
cable.(Compatible to USB 1.1)
Connect your PC to this terminal with the USB cable
provided with the product. (compatible to USB 2.0)
Make sure to use the USB cable (A-B type) provided with
the product when connecting your digital photo frame to a
PC through the up stream terminal
Connect the DC power adapter to this jack.
Connect the power cord to the power terminal
of the power adapter.
A 90 degree rotating stand allows both horizontal
and vertical installations.
When connecting an external device to the down stream terminal, use
the USB cable provided with the external device. (For more information
on external devices and their cables, contact a relevant service center.)
Samsung carries no liability for external device malfunctions caused by
using any cable except the standard cables specified for each device.
HONG KONG 3698 - 4698 www.samsung.com/hk
1
2
3
4
5
6
7
89
10 11
12
13
14
12
/
/
Power
Warning
Insert the power plug correctly until it is firmly in place.
Failing to do so, may cause fire.
Do not use a damaged power plug, cord or outlet, as this
may cause electric shock or fire.
Do not touch the power plug with wet hands, as this may
cause electric shock.
Do not connect more than one appliance to a single outlet,
as an overheated outlet may cause fire.
Do not use force to pull the power cord.
Don’t place anything heavy on the power cord, as this may
cause electric shock or fire.
Make sure to turn the power off and disconnect the power
plug from the outlet before moving the product. Make sure
to disconnect the connection cables from other devices as
well.
Moving the product without disconnecting the power cord
may damage it while moving, and may cause electric shock
or fire.
Attention
Hold and pull out the plug by its body when disconnecting
it from the outlet, as pulling the plug out by the cord may
cause it to be damaged.
Failing to do so, may cause fire, or the product may not turn
on normally.
Ensure that the power plug is disconnected before cleaning
the product.
Failing to do so, may cause electric shock or fire.
Do not let water come into contact with or enter the power
adapter, as this may cause electric shock or fire.
It is highly recommended not using the product outdoors in
snowy or rainy weather, or near any water.
When cleaning the floor with water, avoid any water contact
with the power adapter.
Do not place the power adapter near a heater, as this may
cause fire.
Installation
Warning
When installing the product on a cabinet or shelf, do not let
the front end of the product project beyond its front edge.
Failing to do so, may cause the product to fall, resulting in a
product malfunction or personal injury.
Do not place the power cord near a heater, as the power
cord may melt, causing electric shock or fire.
Do not install the product in a location exposed to oil,
smoke, moisture, water, or rainwater, or in a car.
Any contact of these materials with the product may cause
electric shock or fire.
Disconnect the power plug when there is thunder or
lightning.
Failing to do so, may cause electric shock or fire.
Attention
Place the product down gently when installing it.
Failing to do so, may cause product damage or personal
injury.
Avoid dropping the product when moving, as this may cause
product damage or personal injury.
Do not install the product in a location easily reached by
children.
As the product may fall and cause personal injury.
Using and Cleaning
Warning
Do not insert any metal objects such as chopsticks, wire, or
gimlets, or flammable items such as paper or matches into
the terminals at the back of the product, as this may cause
electric shock or fire.
If water or any foreign substance enters the product, make
sure to turn the product off disconnect the power plug from
the outlet, and contact a service center.
Never disassemble, repair, or modify the product yourself.
If you need to repair your product, contact a service center.
Failing to do so, may cause electric shock or fire.
Using and Cleaning
Attention
If you hear a strange sound, smell anything burning, or see
smoke, disconnect the power plug immediately and contact
a service center.
Failing to do so, may cause electric shock or fire.
Always remove dust and water from the pins and connec-
tions of the power plug.
Failing to do so, may cause electric shock or fire.
We recommend contacting a service center at least once a
year for cleaning the inside of the product.
If dust remains inside the product for a long time, the
product may malfunction.
When cleaning the product, first disconnect the power plug
and clean it with a soft, dry cloth.
Do not use any chemicals such as benzene, alcohol, thin-
ners, mosquito repellant, aromatic, lubricant, detergent or
wax.
When not using the product for a long time, make sure to
disconnect the power plug.
Heavy accumulated dust may generate heating or ignition,
causing electric shock or fire.
If the product needs to be installed to a particular location,
rather than under general conditions, make sure to contact
one of our service engineers about the installation as the
product may encounter serious quality problems due to its
environment.
This refers to places exposed to conditions such as heavy
fine dust, chemicals, high or low temperature, moisture, or
when the product needs to be used continually without a
break over a long time.
If the product has been dropped or the product casing is
damaged, turn it off and disconnect the power plug.
Using the product without verifying that it has not been
damaged may cause electric shock or fire. Please contact a
service center.
Make sure to follow the directions below to prevent accidents and damage to the product by using the product correctly.
Warning : Failure to follow the accompanying directions may lead to serious injury or death.
Attention : Failure to follow the accompanying directions may lead to minor personal injury or property damage.
Safety Symbols
BN68-01243A-01

On Screen DisplayOn Screen Display
Settings
English, Deutsch, Español, Français, Italiano, Nederlands, Polski, Português, Русский, 简体中文, 繁體中文
Select a language to use for your product.
Language
Off, On
If On is selected, a slide show starts automatically when your monitor is turned on.
Auto Slide Show
0~100
Adjust brightness from 0 to 100 levels.
Brightness
Update the product using an external memory(SD/MMC/MS/XD, USB).
Please visit www.samsung.com for the latest firmware update.
Firmware Update
Model, Firmware Version
View the product information.
System Information
Yes, No
Reverts the product settings to factory defaults.
Reset Settings
When you turn on the power, a slide show starts with the photo files under the root directory of the installed external memory device.
If there is no photo file contained in it or no external memory device is installed, the Photo menu screen is displayed.
The screen will be automatically changed to Clock mode like ‘Screen Saver’ unless key action within 5 minutes. But Slide Show mode has no change.
Sub menu of the Clock mode is displayed when pushing MENU button in the Clock mode, go back to the main menu screen when pushing BACK button.
Loads the contents stored on the media connected via USB port.
Press the MENU button at the right while the slide show is progressing.
Direct Functions (Slide Show)
Play the next file in the list. Show the information on the file
Play the previous file in the list. Show the information on the file.Pause slideshow
Pause slideshow
[ ] : Play slideshow. Pause slideshow. Show the information on the file.
[ ] : Pause slideshow. Play slideshow.
MENU Pause slideshow. Show the menu on the file.
Exit the menu. Play slideshow.
Play slideshow
Pause slideshow
Photo
Start slideshow
Start Slide Show
Off , Fade, Shutter, Cross Comb, Mask, Brick,
Dissolve, Bar, Expansion, Silk, Random
Select an effect to give when displaying images on the screen.
Slide Show Settings Slide Show Effect
Fast, Normal, Slow
Select a mode among Fast, Normal, and Slow.
Slide Show Speed
On, Off
Select the Repeat for displaying images.
Slide Show Repeat
On, Off
Select whether to playback the files sequentially or in shuffle mode.
Slide Show Shuffle
0~100
Adjust brightness from 0 to 100 levels.
Brightness
On, Off
If a photo is to be displayed in portrait mode while your Digital Album is placed horizontally, it is automatically displayed
rotated and fit to the width.
Auto Rotation
Original, 90°, 180°, 270°
Select one among Original, 90°, 180°, and 270°.
Rotate
Original, Fit To Width, Fit To Screen
Select an aspect ratio for images to display.
Aspect Ratio
Original, x1, x2, x4
Select this if you want to zoom into a photo. You can magnify it to the x2 or x4 size. The x1 size is when the photo is set to Fit
to Width.
Zoom
Clock
12 Hours, 24 Hours
Enter and set 12 Hours, 24 Hours.
Time Format
YYYY/MM/DD, MM/DD/YYYY, DD/MM/YYYY
Select a Date Format.
Date Format
When the Time Format is set to 12 Hours : Activation, Hour, Minute, am/pm , Repeat
When the Time Format is set to 24 Hours : Activation, Hour, Minute, Repeat
Your product will turn on at the specified time automatically.
On Timer
Your product will turn off at the specified time automatically.
This is only to turn off the screen and not to turn off the main power.
Off Timer
When the Time Format is set to 12 Hours : Activation, Hour, Minute, am/pm , Repeat
When the Time Format is set to 24 Hours : Activation, Hour, Minute, Repeat
Date and Time
When the Time Format is set to 12 Hours : Month, Day, Year, Hour, Minute, am/pm
When the Time Format is set to 24 Hours : Month, Day, Year, Hour, Minute
Enter and set Month, Day, Year, Hour, Minute or am/pm.
Whenever the power plug is disconnected, the Date and Time information is lost. Therefore, you need to reset them each time.
Only photos with a resolution of less than 8000 (width) * 8000 (height) pixels can be displayed on the screen.
Push the MENU button of the right while practicing slide show.
List Menu
Open the folder.
Copy the folder.
Delete the folder.
Start slideshow.
This appears when a photo file is selected.
Copy the file.
Open
Copy
Delete
Start Slide Show
Copy / Copy All files
Delete / Delete All files Delete the file.
Sub folder select Photo Select
Control Buttons
Opens the on-screen menu and exits from the menu.
These buttons allow you to adjust items in the menu.
Activates a highlighted menu item.
Use this button to step one step back in the menu.
MENU ENTER
BACK
Model Name
Screen
Supported Formats
Built-in Memory
USB
SPF-72H
7” TFT
JPEG (RGB, less than 8000x8000 pixels), Progressive JPEG is not supported
128 MB
One upstream (host) and one downstream (device)
800 x 480
Type
Resolution
SpecificationsSpecifications
Items Specifications
The product design may differ according to the model, and specifications are subject to change without prior notice for
product performance enhancement.
Operating System Windows 2000(SP2), Windows XP, MAC OS X(10.x), Linx OS (2.6.x)
TroubleshootingTroubleshooting
This section lists various problems and solutions encountered by users while using the digital photo frame. When encountering a problem, first check the
list below and follow the suggested action if one matches your problem. If the problem still persists, contact or visit the nearest service center.
Possible Causes and Suggested Actions
If Auto On Timer and Off Timer are set to the same time, they do not work. Please check these times.
If both the On Timer and Off Timer are set to the same time, the Off Timer has priority and operates first .
Symptoms
My Digital Photo Frame does not turn on.
On Timer and Off Timer does not work.
Loading a file from an external memory card may take several seconds.
(This depends on the file format and size.)
It takes some time to display an image after
the digital photo frame turns on.
Select one of the three values in the Photo>Aspect Ratio menu using the buttons on the right side of
the product.
The aspect ratio of the screen looks abnor-
mal.
Adjust the brightness in the Settings>Brightness menu using the buttons on the right side of the
product.
The screen colour is dimmed or too strong.
Check the cable connection between the product and the external device. Check whether the external
device works as a standalone, and check the format of the files stored on it. For this product, the USB
host operates using USB 1.1 specifications and the USB devices operate using USB 2.0 specifications.
This product has no built-in battery. Whenever the power plug is disconnected, the Date and Time
information is lost. Therefore, you need to reset them each time.
Displaying the menu and other operations may take some time while the product is loading an image
to display on the screen.
Check the power connection between the product and the power adapter.
Check if Auto Rotation is set to On.
Check if Auto Slide Show is set to Off.
Check the file system on the memory card.
Check the type of the USB memory device. This product may not support the compound USB device.
I have connected an external device (USB
memory device), but it does not work.
I find the time goes wrong.
A menu is not displayed immediately when I
press the menu button.
Photos are automatically displayed as rotated.
The slide show does not start automatically.
I have connected a memory card,
but it does not work.
I have connected a USB memory device,
but it does not work.