Samsung DVD-V14000 User manual

DVD-VCR
DVD-V14000
Instruction Manual
www.samsungvcr.com
00046S DVD-V14000/HACO-GB1 3/21/03 4:44 PM Page 1

GB
Contents (cont.)
3
GB
Contents
2
◆DVD FUNCTIONS
■Choosing a Connection................................................................................. 29
■Using the DVD SETUP.................................................................................. 30
■Using the Disc Menu Language.................................................................... 31
■Setting Up the Language Features................................................................ 32
■Setting Up the Parental Control..................................................................... 33
■Setting Up the Audio Options........................................................................ 34
■Setting Up the Display Options...................................................................... 35
■A/V Receiver Connections............................................................................. 36
■Special Playback Features............................................................................ 37
■Using the Display Function (DVD)................................................................. 38
■Using the Display Function (CD/VCD)........................................................... 38
■Repeat Play................................................................................................... 39
■Program Play (DVD/VCD/CD)....................................................................... 40
■Random Play (DVD/VCD/CD)....................................................................... 40
■SCREEN FIT Play......................................................................................... 41
■Digest Play.................................................................................................... 42
■Using the Disc View Function........................................................................ 43
■Selecting the Audio Language....................................................................... 44
■Selecting the Subtitle Language.................................................................... 44
■Changing the Camera Angle......................................................................... 45
■Using the Bookmark Function....................................................................... 46
■Using the Zoom & 3D Sound Functions........................................................ 47
■MP3 Play....................................................................................................... 48
■CD-R MP3 Disc Requirements...................................................................... 49
◆KARAOKE FUNCTIONS (DVD)
■Beginning Karaoke Functions........................................................................ 50
■Key Control.................................................................................................... 50
■Reserving a Song.......................................................................................... 51
■Cancellation of reservation............................................................................ 51
■Vocal Fader................................................................................................... 52
■Guide Melody................................................................................................ 52
■Score Function.............................................................................................. 52
■Types of Karaoke disc................................................................................... 52
◆SOLVING PROBLEMS
■Technical Specifications................................................................................ 53
■Problems and Solutions (VCR)...................................................................... 54
■Troubleshooting Guide (DVD)....................................................................... 55
◆FOREWORD
■Safety Instructions......................................................................................... 4
■Disc Type and Characteristics....................................................................... 5
◆DVD-VCR OVERVIEWS
■Front View of the DVD-VCR.......................................................................... 6
■Rear View of the DVD-VCR........................................................................... 6
■Infrared Remote Control................................................................................ 7
■Display Indicators.......................................................................................... 8
■Accessories................................................................................................... 8
◆CONNECTING YOUR DVD-VCR
■Deciding How to Connect DVD-VCR............................................................. 9
■Connecting DVD-VCR to the TV using the RCA Cable................................. 10
■Connecting Other Equipment to Your DVD-VCR.......................................... 10
■Deck Control Keys......................................................................................... 11
■Copying from DVD to VCR............................................................................ 12
■Inserting Batteries in the Remote Control...................................................... 13
■Setting the Date and Time............................................................................. 13
■Menu Language............................................................................................. 14
◆SETTING UPYOUR DVD-VCR
■Selecting the Colour Mode............................................................................ 15
■Intelligent Picture Control.............................................................................. 16
■Auto Power off............................................................................................... 16
■Selecting the Cassette Type.......................................................................... 17
■Auto Repeat Play........................................................................................... 17
■Displaying/Hiding On-Screen Information..................................................... 18
■Selecting the Recording Speed..................................................................... 18
■Protecting a Recorded Cassette.................................................................... 19
■Connecting an RCA Audio/Video Input Cable............................................... 19
■Recording from Another VCR or Camcorder................................................. 20
■Recording a Programme with Automatic Stop............................................... 21
◆PLAYING BACK
■Playing a Cassette......................................................................................... 22
■Adjusting Picture Alignment Automatically.................................................... 22
■Adjusting Picture Alignment Manually........................................................... 22
■Selecting the Audio Output Mode.................................................................. 23
■Playing a Cassette in Slow Motion................................................................ 23
■Playing a Sequence Frame by Frame........................................................... 24
■Playing a Sequence at Variable Speeds....................................................... 24
■Searching for a Specific Sequence............................................................... 25
■Picture Search, Fast Forword/Rewind........................................................... 26
■Using the Tape Counter................................................................................ 26
■SQPB (Super VHS Quasi Playback)............................................................. 27
◆KARAOKE FUNCTIONS (VCR)
■Using the KARAOKE Function...................................................................... 28
■SCORE Function........................................................................................... 28
■KARAOKE SEARCH Function...................................................................... 28
☛
➢
Note
Important
Hold down
Press/push
Symbols
1 1
1
= Step number
00046S DVD-V14000/HACO-GB1 3/21/03 4:44 PM Page 2

GB
5
GB
4
Disc Type and Characteristics
This DVD player is capable of playing the following types of discs with the corresponding logos :
* DO NOT play CD-ROM, CD-I and DVD-ROM in this player!
(CDGs play audio only, not graphics.)
~DIGITAL
SOUND
STEREO
• Playback
Region
Number
• PAL colour
system in U.K,
France, Germany,
China etc.
• Dolby
Digital disc • Digital
Audio disc
• Stereo
disc • DTS disc
Disc Markings
Both the DVD player and the discs are coded by region. These regional codes must match in order for the
disc to play. If the codes do not match, the disc will not play.
The Region Number for this player is described on the rear panel of the player.
Playback Region Number
PAL
12 Cm
8 Cm
Single-sided
240 min.
Double-sided
480 min.
Single-sided
80 min.
Double-sided
160 min.
Audio
+
Video
Audio
+
Video
Audio
• DVD contains excellent sound
and video due to Dolby Digital
and MPEG-2 system.
• Various screen and audio
functions can be easily selected
through the on-screen menu.
• Video with CD sound, VHS
quality & MPEG-1 compression
technology.
• An LP is recorded as an analog
signal with more distortion. CD
is recorded as a Digital Signal
with better audio quality, less
distortion and less deterioration
of audio quality over time.
VIDEO-CD
AUDIO-CD
12 Cm
8 Cm
74 min.
20 min.
12 Cm
8 Cm
74 min.
20 min.
Disc Types
(Logos) Recording
Types Disc Size Max.
Playing
Time Characteristics
DVD
• NTSC broadcast
system in USA,
Canada, japan,
South Korea, etc.
NTSC
Safety Instructions
The following illustrations represent precautions.
The lightning bolt is a warning sign alerting you to dangerous voltage inside the product.
DO NOT OPEN THE DVD-VCR. Refer to service personnel.
THIS DEVICE IS NOT FOR USE IN INDUSTRIAL
ENVIRONMENTS
Do NOT expose the DVD-VCR
to extreme temperature condi-
tions (below 5°C and above
40°C) or to extreme humidity
conditions (less than 10% and
more than 75%).
Do NOT expose the DVD-VCR
to direct sunlight. Do NOT expose the DVD-VCR to any liquids.
Do NOT place any objects on
the DVD-VCR or remote
control.
During a storm and/or light-
ning, unplug the DVD-VCR
from the mains socket and
aerial.
If the remote control is not
used for a long period of time,
remove the batteries and store
it in a cool, dry place.
00046S DVD-V14000/HACO-GB1 3/21/03 4:44 PM Page 4

GB
7
GB
6
Infrared Remote Control
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
1STANDBY/ON
2TRACKING +/-
3AUDIO
4SHUTTLE <</>>
5MODE, REPEAT
6KARAOKE SEARCH
7ZOOM, SVHS
83D SOUND
9DVD, VCR
10 AUTO TRACKING
11 VOLUME
/
12 REWIND, SKIP BACK
13 STOP
14 RECORD
15 UP
16 LEFT
17 SETUP/ENTER
18 RETURN
19 TITLE, SPEED
20 OPEN/CLOSE
21 0-9
22 DISPLAY
23 CLOCK/COUNTER
24 ANGLE
25 CLEAR
26 SCREEN FIT
27 KARAOKE
28 DIGEST, F.ADV/STEP
29 ECHO
/
30 FAST-FORWARD
SKIP NEXT
31 DISC MENU
32 PLAY/STILL
33 RIGHT
34 DOWN
35 MARK, INDEX
36 SUBTITLE
Front View of the DVD-VCR
Rear View of the DVD-VCR
1 2 3 4 5 6 7
1LINE OUT TO TV (COMPOSITE)
2LINE IN 1
3AUDIO LINE OUT
(S-VIDEO OR COMPONENT)
4COMPONENT VIDEO OUT
5DIGITAL AUDIO OUT (COAXIAL)
6DIGITAL AUDIO OUT (OPTICAL)
7S-VIDEO OUT
VIDEO CASSETTE
COMPARTMENT
KEY CONTROL
BUTTONS
PLAY/STILL
BUTTON
STOP
BUTTON
REW /
SKIP BACK
BUTTON
RECORD
BUTTON
EJECT
BUTTON
F.F /
SKIP NEXT
BUTTON
OPEN/CLOSE
BUTTON DVD/VCR SELECT
BUTTON COPY
BUTTON
DVD DECK
STANDBY/ON
BUTTON
ECHO
BUTTONS
VOLUME
BUTTONS
MIC JACK
00046S DVD-V14000/HACO-GB1 3/21/03 4:44 PM Page 6

GB
9
GB
8
Deciding How to Connect DVD-VCR
You must take into account various factors when connecting audio or video systems:
◆Types of connectors available on your systems
◆Systems connected permanently to the DVD-VCR (satellite receiver for example) or
temporarily (camcorder for example)
Your DVD-VCR is equipped with the following connectors.
Connector Location Type Direction Recommended Use
LINE Rear Audio/Video RCA In/Out ◆Television
◆Other VCR
Audio output Rear Audio RCA Out ◆LINE Audio out (DVD only)
COMPONENT Rear RCA Out ◆COMPONENT out (DVD only)
output
S-VIDEO Rear S-JACK Out ◆S-Video out (DVD only)
output
Digital AUDIO Rear Optical Out ◆Digital Audio out (DVD only)
output coaxial
☛Whenever you connect an audio or video system to your DVD-VCR, ensure that all elements
are switched off.
Refer to the documentation supplied with your equipment for detailed connection instructions
and associated safety precautions.
Display Indicators
Accessories
You have just purchased a SAMSUNG Video Cassette Recorder (DVD-VCR).
Together with your DVD-VCR, you will find the following accessories in the box.
REMOTE CONTROL
& BATTERIES AUDIO & VIDEO
CABLE
OWNER’S
INSTRUCTIONS
1 2 3 4 5 6 7
8 9 10 11 12 13
1The DVD Deck is active
2A DVD, CD, VCD, or SVCD is loaded
3The number to the right of the “TITLE” symbol is
the current title number
4The time, counter position, time remaining or
current deck status is displayed
5VHS tape is inserted
6Recording is in progress (normal and timer)
7The VCR Deck is active
83D Sound is active
9A DVD with a DTS soundtrack is loaded
10 The number to the right of the “CHAP” symbol is
the current chapter number
11 The Hi-Fi track of a VHS tape is playing
(The current TV show or video is broadcast in
Stereo)
12 A Timer Recording is programmed or in progress.
If blinking there is an error.
13 DVD to VHS copy is in progress
00046S DVD-V14000/HACO-GB1 3/21/03 4:44 PM Page 8

GB
11
Deck Control Keys
The DVD-VCR uses one set of controls to operate both decks. The
following keys are helpful in successfully controlling each deck.
1STANDBY/ONButton
Press the STANDBY/ON button on the remote control or front
panel to turn on the DVD-VCR.
2DVD Button
Press the DVD button on the remote control when you want to
control the DVD deck.
◆The DVD indicator will light on the Front Panel Display to show
that the DVD deck is selected.
3VCR Button
Press the VCR button on remote control when you want to control
the VCR deck.
◆The VCR indicator will light on the Front Panel Display to show
that VHS deck is selected.
4DVD-VCR Toggle
Press the SELECT button on the front panel to toggle control
between the DVD deck and the VCR deck.
➢Before using the VCR operation of 13~28 pages, press
the VCR button on the remote control to select VCR
mode.
Before using the DVD operation of 29~52 pages, press
the DVD button on the remote control to select and
watch DVD.
11
23
4
GB
10
Connecting DVD-VCR to the TV using the RCA Cable
You can connect your DVD-VCR to the television using the RCA cable if the appropriate input is available
on the television. You thus:
◆Obtain better quality sound and pictures
◆Simplify the setting up procedure of your DVD-VCR
☛◆Make sure that both the television and the DVD-VCR are switched off before connecting the cables.
1Connect one end of the RCA Audio/Video cable to the Video output and Audio L, R output socket on the rear
of the DVD-VCR.
2Plug the other end into the appropriate connector on the television.
1
2
TV
Connecting Other Equipment to Your DVD-VCR
➢The RCA input/output connectors on the rear of the DVD-VCR are used for equipment, such as
camcorders, VCRs or sound systems.
REAR OF THE DVD-VCR
Camcorder
VCR
Sound system
You can connect other audio and/or video equipment to your DVD-VCR in different ways. The following
illustrations give a few examples of the connection possibilities.
00046S DVD-V14000/HACO-GB1 3/21/03 4:44 PM Page 10

GB
13
GB
12
Inserting Batteries in the Remote Control
Setting the Date and Time
You must insert or replace the batteries in the remote control when
you:
◆Purchase the DVD-VCR
◆Find that the remote control is no longer working
correctly
1Push the tab in the direction of the arrow to release the battery
compartment cover on the rear of the remote control.
2Insert two AA, R6 or equivalent batteries, taking care to respect
the polarities:
◆+ on the battery with + on the remote control
◆– on the battery with – on the remote control
3Replace the cover by aligning it with the base of the remote
control and pushing it back into place.
➢Do not mix different battery types (manganese and
alkaline for example).
You must set the date and time when:
◆You purchase the DVD-VCR
☛◆Do not forget to reset the time when you change clocks
from winter to summer time and vice versa.
1Press SETUP on the remote control.
Result: The MAIN MENU is displayed.
2Press the corresponding , or , buttons to select the
CLOCK option.
3Press the ENTER button to select this option.
Result: The CLOCK SET menu is displayed.
4Press or to select the hour, minutes, day, month and year.
Result: The option selected flashes.
5Press the or buttons to increase or decrease the value.
Result: The day of the week is displayed automatically.
➢You can hold the or buttons down to scroll more
quickly through the values.
6On completion, press RETURN to exit the menu.
RETURN
CLOCK SET
12:00 1/JAN/2002
TUE
MAIN MENU
CLOCK SET
RETURN ENTER
Copying from DVD to VCR
The DVD-VCR allows you to copy the contents of a DVD to a VHS
tape with a press of the COPY button.
If the DVD you are attempting to copy is copy
protected, you will not be able to copy the disc. It is not
permitted to copy Macrovision® encoded DVDs.
1Insert Disc
Insert the disc you wish to copy in the DVD deck and close the
drawer.
2Insert VHS Tape
Insert a blank VHS videotape into the VCR deck.
3Copy the DVD to VHS Tape
Press the COPY button on the DVD-VCR front panel.
◆The DVD will go into Play mode and the VCR will go into Record
mode.
4Stop the Copy Process
When the DVD is finished playing, press the VCR button on the
remote control and then press the STOP button to end the copy.
◆You must stop the Copy process manually when the DVD movie
ends or the DVD may replay and record over and over again.
☛For NTSC DVD or VCD copy
◆Before starting the copy process, set the Quasi PAL to
Off in Display options of DVD SETUP (see page 35).
◆If Quasi PAL is On, the copy process can not active.
◆The copy is only active PAL tape system.
1
2
3
4
4
1
00046S DVD-V14000/HACO-GB1 3/21/03 4:44 PM Page 12

GB
14
Menu Language
Follow these steps to change the on-screen menu language to
, English.
1 Open “MAIN MENU”
With the DVD in stop mode, press the SETUP button.
2 Set “Language”
Using the
, or , buttons, move the selection arrow to
Language set then press ENTERbutton.
3Set menu Language
Move the selection bar to your desired Language, then press
ENTER button.
1
LANGUAGE SET
RETURN ENTER
MAIN MENU
LANGUAGE SET
RETURN ENTER
English
00046S DVD-V14000/HACO-GB1 3/21/03 4:44 PM Page 14

GB
15
Selecting the Colour Mode
Before recording or playing back a cassette, you can select the
required system standard.
Otherwise, the system automatically selects the reception standard
when you select AUTO.
➢ ◆When playing back a cassette, the standard is
automatically selected by the DVD-VCR.
◆When you playback an NTSC-recorded tape on this DVD-
VCR make a setting on the colour system according to your
TV. If your TV is a PAL system only TV, set NTPB.
If your TV is Multi System TV (NTSC 4.43 compatible), set
NT4.43 and you can record NT4.43.
1Press SETUP on the remote control.
Result: The MAIN MENU is displayed.
2Press the corresponding , or , buttons to select the
Option option.
3Press the ENTER button to select this option.
Result: The USER SET menu is displayed.
4Press the corresponding or buttons, until the cursor is placed
on the COLOUR SYSTEM option.
5Press the button to select AUTO ➝ PAL ➝ MESECAM ➝ B/W.
AUTO When playing back a cassette, the system standard is
automatically selected by the DVD-VCR.
B/W Black and White
6On completion, press RETURN twice to exit the menu.
USER SET
COLOUR SYSTEM :AUTO
IPC :ON
AUTO POWER OFF :OFF
RETURN
AUTO
PAL
MESECAM
B/W
VCR
MAIN MENU
USER SET
RETURN ENTER
00046S DVD-V14000/HACO-GB2 3/21/03 4:45 PM Page 15

GB
17
GB
16
If you wish to use the tape counter to display the time remaining on
a cassette, you must indicate the type of cassette inserted.
1Press SETUP on the remote control.
Result: The MAIN MENU is displayed.
2Press the corresponding , or , buttons to select the
VCR option.
3Press the ENTER button to select this option.
Result: The VCR FUNCTION SETUP menu is displayed.
4Press the corresponding or buttons, until the cursor is placed
on the Tape Select option.
5Press the or buttons as many times as required, until the
correct cassette length is displayed.
E180 E240
E 300 E260
6Press RETURN twice to exit the menu.
Selecting the Cassette Type
You can set repeat play to repeat the tape continuously from
beginning to end.
1Press SETUP on the remote control.
Result: The MAIN MENU is displayed.
2Press the corresponding , or , buttons to select the
VCR option.
3Press the ENTER button to select this option.
Result: The VCR FUNCTION SETUP menu is displayed.
4Press the corresponding or buttons, until the cursor is placed
on the Repeat Play option.
5To... Press or , until...
Repeat play ON is displayed.
Do not wish to repeat play OFF is displayed.
6On completion, press RETURN twice to exit the menu.
Auto Repeat Play
VCR FUNCTION SETUP
Tape Select E180
Repeat Play Off
OSD O n
RETURN
E180
E240
E260
E300
VCR FUNCTION SETUP
Tape Select E300
Repeat Play Off
OSD O n
RETURN
Off
On
VCR
VCR
Intelligent Picture Control
Auto Power Off
The Intelligent Picture Control Feature allows you to adjust the
sharpness of the image automatically, according to your own
preferences.
1During playback, press the SETUP button on the remote control.
Result: The MAIN MENU is displayed.
2Press the corresponding , or , buttons to select the
Option option.
3Press the ENTER button to select this option.
Result: The USER SET menu is displayed.
4Press the corresponding or buttons, until the cursor is
placed on the IPC option.
5Press the or button to select the IPC (intelligent picture
control) option.
➢When intelligent picture control mode is ON, the sharpness
of the image is adjusted automatically.
6To adjust the sharpness manually, press the button to turn the
IPC mode OFF.
7Press the or buttons until the picture is displayed according to
your preferences.
➢If you do not press a button within ten seconds, the
PICTURE menu disappears automatically.
8On completion, press the RETURN button again.
The Auto Power Off feature automatically turns off your DVD-VCR
if no signal is received and you do not press any button for the
selected time.
1Press SETUP on the remote control.
Result: The MAIN MENU is displayed.
2Press the corresponding , or , buttons to select the
Option option.
3Press the ENTER button to select this option.
Result: The USER SET menu is displayed.
4Press the corresponding or buttons, until the cursor is
placed on the AUTO POWER OFF option.
5Press the button, until you select the time of Auto Power off
interval. OFF 2HOUR 3HOUR
6On completion, press RETURNtwice to exit the menu.
USER SET
COLOUR SYSTEM :AUTO
IPC :ON
AUTO POWER OFF :OFF
RETURN
ON
OFF
USER SET
COLOUR SYSTEM :AUTO
IPC :ON
AUTO POWER OFF :OFF
RETURN
OFF
2HOUR
3HOUR
VCR
VCR
MAIN MENU
USER SET
RETURN ENTER
MAIN MENU
USER SET
RETURN ENTER
MAIN MENU
VCR FUNCTION SETUP
RETURN ENTER
MAIN MENU
VCR FUNCTION SETUP
RETURN ENTER
00046S DVD-V14000/HACO-GB2 3/21/03 4:45 PM Page 16

GB
19
GB
18
Displaying/Hiding On-Screen Information
Selecting the Recording Speed
Your DVD-VCR displays most information both on the DVD-VCR
and the television.
You can choose to display or hide this information on the television
screen (except for the Index, MAIN MENU, which cannot be
hidden).
1Press SETUP on the remote control.
Result: The MAIN MENU is displayed.
2Press the corresponding , or , buttons to select the
VCR option.
3Press the ENTER button to select this option.
Result: The VCR FUNCTION SETUP menu is displayed.
4Press the corresponding or buttons, until the cursor is placed
on the OSD option.
5To... Press or , until...
Display on-screen information ON is displayed.
Hide on-screen information OFF is displayed.
6On completion, press RETURN twice to exit the menu.
T ype Recording Time (in SP)
E-180 180 mins. or 3 hours
E-240 240 mins. or 4 hours
E-260 260 mins. or
4 hours and 20 mins.
E-300 300 mins. or 5 hours
VCR FUNCTION SETUP
Tape Select E300
Repeat Play Off
OSD O n
RETURN
On
Off
You can record a cassette at two different speeds:
◆SP (Standard Play)
◆LP (Long Play)
In Long Play modes:
◆Each cassette lasts twice as long
◆The recording is of a slightly lower quality
To record a cassette... Press the SPEED button on the
remote control, until...
In standard play mode SP is displayed.
In long play mode LP is displayed.
VCR
VCR
Connecting an RCA Audio/Video Input Cable VCR
You can connect other audio/video equipment to your DVD-VCR
using audio/video cables if the appropriate outputs are available on
the equipment chosen.
Examples: ◆You wish to copy a video cassette with the help of a
second VCR (see page 20).
◆You wish to play back and/or copy pictures taken
with a camcorder (see page 20).
☛◆Make sure that both the television and the DVD-VCR
are switched off before connecting the cables.
1Connect one end of the RCA audio/video cable into the VIDEO
socket on the Rear of the DVD-VCR.
2Plug the other end of the audio/video cable into the appropriate
output connector on the other system (VCR or camcorder).
3Connect one end of the RCA audio cable into the AUDIO sockets
on the Rear of the DVD-VCR.
➢Take care to respect the colour coding of the left and right
channels.
4Plug the other end of the audio cable into the appropriate output
connectors on the other system (VCR, camcorder or Hi-Fi sound
system).
33
Protecting a Recorded Cassette
Video cassettes have a safety tab to prevent accidental erasure.
When this tab has been removed, you cannot record on the tape.
1If you wish to protect a cassette, break off the tab using a small
screwdriver.
2To re-record over a protected cassette (safety tab broken), cover
the hole with adhesive tape. 1
VCR
MAIN MENU
VCR FUNCTION SETUP
RETURN ENTER
1
00046S DVD-V14000/HACO-GB2 3/21/03 4:45 PM Page 18

GB
21
GB
20
Recording a Programme with Automatic Stop
This function enables you to record up to nine hours (LP) of
programmes.
Your DVD-VCR stops automatically after the requested length of
time.
1Switch on the television.
2Insert the cassette on which the programme is to be recorded,
with the window visible and the safety tab intact or the opening
covered with adhesive tape.
Result: The DVD-VCR is switched on automatically.
3Select the recording speed by pressing the SPEED button as
many times as required (see page 18).
4Hold the REC button (
●
) down for a while to start recording.
Result: The record indicator appears on the television screen
and DVD-VCR display. An index is recorded on the
tape (see page 25).
5Press the REC button (
●
) several times to increase the
recording time in:
◆30-minute intervals up to four hours
◆1-hour intervals up to nine hours (LP)
Result: The length is displayed on the television displays. The
selected programme is recorded for the length of time
requested. At the end of that time, the DVD-VCR stops
recording automatically.
6If you wish to cancel the recording before the end, press
STANDBY/ON.
☛If the end of the tape is reached while recording:
◆The recording stops and power off
2
4
3
VCR
LENGTH 2:30
SET LENGTH :
PRESS REC ●
Recording from Another VCR or Camcorder
You can copy a cassette to your DVD-VCR from another video
source, such as another VCR or a camcorder.
☛ It is an infringement of copyright laws to copy prerecorded
cassettes or to re-record them in any form without the
permission of the owners of the corresponding copyright.
1Connect the DVD-VCR, fromwhich the cassette is to be copied, to
the appropriate RCA audio and video input connectors on the
rear of your DVD-VCR, as indicated on page 10.
2Insert a blank cassette in your DVD-VCR.
3Insert the pre-recorded cassette in the other video source (VCR or
camcorder).
4Start playing back the cassette to be copied.
5Hold REC (
●
) down for a while to start recording on your
DVD-VCR.
6When you have finished recording, press
■
on bothVCR and
DVD-VCR.
6
5
2
VCR
00046S DVD-V14000/HACO-GB2 3/21/03 4:45 PM Page 20

GB
23
GB
22
Selecting the Audio Output Mode
You can select the mode in which the sound is reproduced on the
loudspeakers and AV outputs. The following options are available.
Option Description
L Used to listen to the sound on the left Hi-Fi channel.
R Used to listen to the sound on the right Hi-Fi channel.
MIX Used to listen to the mixed sound of the Hi-Fi and normal
channels.
MONO Used to listen to the sound on the normal mono channel.
L R Used to listen to Hi-Fi stereo sound on the left and right
channels.
To select the sound mode, simply press the AUDIO button on the remote
control during playback until the required option is displayed.
L R MIX
L R MONO
Playing a Cassette in Slow Motion
You can play a cassette in slow motion.
➢No sound is heard when playing back a cassette in slow
motion.
1Press:
◆
ll to start playing the cassette
◆ ll button one more time to make STILL mode.
◆to start SLOW mode.
◆
or
button as many times as required to increase or
decrease the speed respectively
◆To return to the normal speed, press the
ll
button twice.
2When playing back in slow motion, picture interference may occur.
Press the TRK
( + or - ) buttons to minimize this effect.
☛When you have been using the Slow Motion function for
more than about five minutes, the DVD-VCR will
automatically play to protect the:
◆Cassette
◆Video heads
22
1
1
VCR
VCR
Playing a Cassette
Adjusting Picture Alignment Automatically
Adjusting Picture Alignment Manually
This function allows you to play back any pre-recorded cassette.
1Switch on both the television and your DVD-VCR.
2Insert the video cassette to be played. If the safety tab on the
cassette is intact, press ll .
Otherwise, the cassette is played automatically.
➢When a cassette is loaded, the tape position is optimized
automatically to reduce disturbance (Digital Auto Tracking).
When playing a cassette, if the end of the tape is reached,
the cassette is rewound automatically.
3To... Then press...
Stop the playback
■
(STOP).
Eject the cassette (EJECT).
The Picture Alignment feature enables you to optimize the tape
position automatically to obtain the best possible picture.
When noise bars or streaks appear during playback, adjust picture
alignment by pressing the A.TRK button.
Result: ◆The tracking bar appears.
◆The picture is automatically adjusted.
◆The tracking bar disappears when digital auto tracking has
been completed.
The Picture Adjustment feature allows you to adjust the alignment
manually to obtain the best possible picture.
When noise bars or streaks appear during playback, adjust alignment
manually by pressing the TRK
( + or - ) buttons until the picture is clear
and stable.
Result: ◆The tracking bar appears.
◆The image is adjusted.
◆The tracking bar disappears when you release the button.
32
3
VCR
VCR
VCR
00046S DVD-V14000/HACO-GB2 3/21/03 4:45 PM Page 22

GB
25
GB
24
Searching for a Specific Sequence
Each time you record a cassette on this DVD-VCR, an “index” is
automatically marked on the tape when recording starts.
The Search function allows you to fast-forward or rewind to a
specific index and start playback from that point. Depending on the
direction selected, the indexes are numbered as follows:
22
1
INDEX :
INDEX SEARCH : -06
INTRO SCAN :
➢This VCR uses a standard indexing system (VISS). As a
result, it will recognize any indexes marked by other
VCRs using the same system and vice versa.
INTRO SCAN
1To search for a specific index, press INDEX.
2Press the
or buttons depending on the direction
where your desired programme is located.
3When an Index mark is found the VCR will playback the tape for 5
seconds, after which it will continue searching for the next Index
mark.
4 If you want to watch the tape from a particular Index, simply press
II
.
Index Skip Search:
This feature will enable you to fast forward/rewind to a specific
point on a tape: E.g. if you have recorded 3 different programmes
on a tape and you have rewound the tape to the beginning, by
using this feature you can go directly to the start of programme 2
simply by pressing the INDEX button.
1Press the INDEX to start the Index search.
2Press the
or buttons twice more. This will take
you directly to the start of the desired programme is located.
3These Index searches can be made forwards: (press ) or
backwards: (press ).
4 To cancel an Index search simply press the
II
or
■
button.
➢You can set an index number up to ±20.
2 1 1 2
etc.
Prev
Seq. Seq. being played Next Seq. etc.
VCR
Playing a Sequence Frame by Frame
Playing a Sequence at Variable Speeds
You can:
◆Stop the cassette at a given frame (image)
◆Advance one frame at a time
➢No sound is heard when playing back frame by frame.
1Press:
◆ ll to start playing the cassette
◆
ll to still the tape at a given frame
◆Press F.ADV/STEP ( ) to advance frame by frame
2To return to normal playback, press ll .
☛When you have been using the still function for more
than about five minutes, the DVD-VCR will automatically
play to protect the cassette and video heads.
➢Vertical stability: When playing back frame by frame,
interference may be seen on the screen. Press the TRK
( ) buttons to minimize this effect.
You can vary the playback speed using the Shuttle function (up to
nine times the normal speed).
Example: You wish to analyze a sportsperson’s technique,
movement by movement.
The Shuttle function is available on the Remote control
➢No sound is heard when playing a sequence at variable
speeds.
1Press:
◆
ll during playback
◆SHUTTLE ( << ) to play the cassette backwards
◆SHUTTLE ( >> ) to play the cassette forwards
2Each time you press a SHUTTLE button, the speed is changed as
shown in the following illustration.
REVERSE REVERSE REVERSE SLOW SLOW PLAY PLAY PLAY
PLAY PLAY PLAY STILL MOTION MOTION PLAY X3 X5 X9
X9 X5 X3 X1/10 X1/5
11
1
1
VCR
VCR
00046S DVD-V14000/HACO-GB2 3/21/03 4:45 PM Page 24

GB
27
GB
26
Using the Tape Counter
The tape counter:
◆Indicates the elapsed time in the play and record modes
(hours, minutes and seconds)
◆Is reset when a cassette is inserted in the DVD-VCR
◆Allows you to find the beginning of a sequence easily
☛If the remaining time is to be calculated correctly, you
must indicate the type of cassette being used.
1Insert a cassette in your DVD-VCR.
2To set the tape counter to zero at the beginning of a sequence:
◆Press DISPLAY twice to display the counter
◆Press CLEARwhen you want to set the tape counter to zero
3To fast-forward or rewind to the sequence at which the counter
was set to zero, simply press
or .
Result: The DVD-VCR stops automatically when the counter
reaches zero.
➢Some DVD-VCR information, such as the counter, can be
displayed on the television screen (unless you have
deactivated the OSD mode; refer to page 18).
Press DISPLAY:
◆Once to display the current function, recording speed,
date, time and counter
◆Twice to display the counter only
◆Three times to display the time remaining on the
cassette
◆Four times to clear the display
2
2
0:00:00
VCR
SQPB (Super VHS Quasi Playback) VCR
This function is for playback of Super VHS format tapes only, not
for recording.
1Inset the SVHS format tape that you want to see.
2Press PLAY ( ll ) to start playing the cassette.
3Press SVHS ( ) button to start SQPB.
☛ If the SQPB is on during normal playback, the video
output is distorted.
3
Picture Search, Fast Forward/Rewind
Picture Search enables you to Fast Forward or Rewind and look for
a particular part of a tape.
1Press PLAY, the VCR will enter normal play mode. While in play,
press and release the (or ) button. The VCR will search at 5
times the normal playback speed.
2To return to normal playback mode, press the
II
button.
3If you press and HOLD down the (or ) button the VCR will
search at 9 times the normal speed. Releasing the button will
return the VCR to search at 5 times the normal speed. To return to
normal playback mode, press the
II
button.
4Whilst in Picture Search mode, if you press the button again,
the VCR will enter normal Fast Forward mode.
5Likewise, whilst in Picture Search mode, if you press the
button again, the VCR will enter normal Rewind mode.
6If, when Rewinding ( ) or Fast Forwarding ( ), you press the
(or ) button, the VCR will enter the Picture Search mode.
VCR
00046S DVD-V14000/HACO-GB2 3/21/03 4:45 PM Page 26

GB
28
1Press the STANDBY/ONbutton and insert KARAOKE tape.
2Connect Mic into MIC1 or MIC2 jack.
Then the KARAOKE mode is transferred “ON” mode.
◆Disconnect the Mic makes the KARAOKE mode transfer to
“OFF” mode automatically.
◆Press the KARAOKE button on the remote control.
Press the
or button to select KARAOKE mode “ON”.
3To adjust the Mic volume and ECHO level, press the VOLUME
and ECHO or keys.
4To sing with accompaniment.
1Press the KARAOKE button on the remote control.
2Press the corresponding or buttons to select the SCORE
mode.
3Press the or buttons to select the SCORE mode “ON”.
4Score will pop up whenever a song is completed.
Using the KARAOKE Function
SCORE Function
1Press the STANDBY/ON button and insert KARAOKE tape.
2Press the KARAOKE button to turn the KARAOKE mode ON.
3Press ll to start playing the cassette.
4When you want the next song during playing a song, press the
KARAOKE SEARCH or KARAOKE SEARCH buttons on the
remote control.
KARAOKE SEARCH Function
2
3
44
KARAOKE :ON
SCORE :ON
VCR
VCR
VCR
00046S DVD-V14000/HACO-GB2 3/21/03 4:45 PM Page 28

29
GB
Choosing a Connection
Connection to an Audio System Connection Component Video Jack
Dolby Digital Audio
Input Jack
Dolby Digital Decoder
TV
S-Video
Jack RCA Jack
Digital Audio out
Jack LINE Audio out
Jack
Analog Audio
Input Jack
The following show examples of connections commonly used to connect the DVD-VCR player with
a TV and other components. It is only available for DVD. The VCR out can not watch by this
connection.
or
or
DVD
00046S DVD-V14000/HACO-GB3 3/21/03 4:31 PM Page 29

31
GB
30
GB
Using the Disc Menu Language
This function changes the text language only on the disc menu
screens.
1With the unit in Stop mode, press the SETUP button on the remote.
Result: The MAIN MENU is displayed.
2Press the corresponding  , ❷ or ➛ , ❿ buttons to select the DVD
option.
3Press the ENTER button to select this option.
Result: The DVD SETUP menu is displayed.
4Use the  or ❷ buttons to select Disc Menu.
5Press the ENTER button.
6Use the  or ❷ buttons to select ‘English’.
- Select “Others” if the language you want is not listed.
7Press the ENTER button.
- English is selected and the screen returns to DVD SETUP.
➢ How to make the SETUP MENU disappear or return to menu
screen during setup ; Press RETURN button.
DVD SETUP
Disc Menu English
Audio English
Subtitle Automatic
Parental Unlocked
Audio Options
Display Options
RETURN
❷
ENTER
RETURN ❷ ENTER
DISC MENU LANGUAGE
❿❿
English
Français
Deutsch
Español
Italiano
Nederlands
Others
Using the DVD SETUP
The DVD SETUP menu lets you customize your DVD player by
allowing you to select various language preferences, set up a
parental level, even adjust the player to the type of television
screen you have.
1With the unit in Stop mode, press the SETUP button on the remote.
Result: The MAIN MENU is displayed.
2Press the corresponding  , ❷ or ➛ , ❿ buttons to select the DVD
option.
3Press the ENTER button to select this option.
Result: The DVD SETUP menu is displayed.
• Disc Menu : Setup of the Menu Language
Use the Menu preference menu to select the
language you want a DVD’s disc menu to be
displayed in.
• Audio : Setup of the Audio Language
Use the Audio preference menu to select the soundtrack
language.
• Subtitle : Setup of the Subtitle Language
Use the Subtitle preference menu to select the
language the disc’s subtitles are to be displayed in.
• Parental : Setup of the Parental Level
Allows users to set the level necessary to prevent
children from viewing unsuitable movies such as
those with violence, adult subject matter, etc.
• Audio Options : Setup of the Audio Options
• Display Options : Setup of the Display Options use to select
which type of screen you want to watch and
several display options.
4Use the  or ❷ buttons on the remote to access the different
features.
5Press the ENTER button to access the sub features.
• To make the setup screen disappear after setting up, press the
RETURN button.
➢ Depending on the disc, some Setup Menu selections may
not work.
DVD SETUP
Disc Menu English
Audio English
Subtitle Automatic
Parental Unlocked
Audio Options
Display Options
RETURN
❷
ENTER
DVD DVD
MAIN MENU
DVD SETUP
RETURN
❷ ➛❿ ENTER
Language Clock Exit
DVD VCR Option
DVD
MAIN MENU
DVD SETUP
RETURN
❷ ➛❿ ENTER
Language Clock Exit
DVD VCR Option
DVD
00046S DVD-V14000/HACO-GB3 3/21/03 4:31 PM Page 30

33
GB
32
GB
Setting Up the Parental Control
The Parental Control function works in conjunction with DVDs that
have been assigned a rating - which helps you control the types of
DVDs that your family watches. There are up to 8 rating levels on a
disc.
1With the unit in Stop mode, press the SETUP button on the remote.
Result: The MAIN MENU is displayed.
2Press the corresponding  , ❷ or ➛ , ❿ buttons to select the DVD
option.
3Press the ENTER button to select this option.
Result: The DVD SETUP menu is displayed.
4Use  or ❷ to select Parental. Press ENTER. The Parental
Control screen appears.
5Use ➛ or ❿ to select Yes if you want to use a password.
The create Password screen appears.
6Enter your password. The Re-enter Password screen appears to
confirm the password. Enter your password again. The Parental
Control screen appears.
7About the Rating Level :
- The Rating Level will work only when Use Password is set to
Yes. To unlock the player, use
➛ or ❿ to select No. Use  or ❷
to select Rating level. Press ENTER.
- Use
 or ❷ to select the level(e.g. Level 6) and press ENTER.
Discs that contain Level 7 will now not play.
- To cancel the rating level, use
➛ or ❿ to select No in Use
Password.
8About the Change Password:
-Use
 or ❷ to select Change Password. The Change
Password screen appears.
-Enter your new password. Re-enter the new password again.
➢• How to make the SETUP MENU disappear or return to
menu screen during set up; Press RETURN button.
• If you have forgotten your password, see Forget Password
in the Troubleshooting Guide. (see page 55)
DVD SETUP
Disc Menu English
Audio English
Subtitle Automatic
Parental Unlocked
Audio Options
Display Options
RETURN
❷
ENTER
RETURN ENTER
PARENTAL CONTROL
Use Password ➛❿ No
RETURN PRESS 0-9
CREATE PASSWORD
Enter Password
_ _ _ _
RETURN
❷
ENTER
PARENTAL CONTROL
Use Password Yes
Rating Level 1
Change Password
RATING LEVEL
Level 8 Adult
Level 7
Level 6
Level 5
Level 4
Level 3
Level 2
Level 1 Kids Safe
Setting Up the Language Features
DVD SETUP
Disc Menu English
Audio English
Subtitle Automatic
Parental Unlocked
Audio Options
Display Options
RETURN
❷
ENTER
RETURN ❷ ENTER
AUDIO LANGUAGE
❿❿
English
Français
Deutsch
Español
Italiano
Nederlands
Original
Others
RETURN ❷ ENTER
SUBTITLE LANGUAGE
❿❿
Automatic
English
Français
Deutsch
Español
Italiano
Nederlands
Others
DVD SETUP
Disc Menu English
Audio English
Subtitle Automatic
Parental Unlocked
Audio Options
Display Options
RETURN
❷
ENTER
1With the unit in Stop mode, press the SETUP button on the remote.
Result: The MAIN MENU is displayed.
2Press the corresponding  , ❷ or ➛ , ❿ buttons to select the DVD
option.
3Press the ENTER button to select this option.
Result: The DVD SETUP menu is displayed.
4Press the  or ❷ buttons to move to Audio.
5Press the ENTER button.
6Press the  or ❷ buttons to select ‘English’ .
- Select “Original” if you want the default soundtrack language to be
the original language the disc is recorded in.
- Select “Others” if the language you want is not listed.
7Press the ENTER button.
- English is selected and the screen returns to DVD SETUP.
1With the unit in Stop mode, press the SETUP button on the remote.
Result: The MAIN MENU is displayed.
2Press the corresponding  , ❷ or ➛ , ❿ buttons to select the DVD
option.
3Press the ENTER button to select this option.
Result: The DVD SETUP menu is displayed.
4Use the  or ❷ buttons to select Subtitle.
5Press the ENTER button.
6Use the  or ❷ buttons to select ‘English’.
- Select “Automatic” if you want the subtitle language to be the same as the
language selected as the audio preference.
- Select “Others” if the language you want is not listed. Some discs
may not contain the language you select asyour initial language;
in that case the disc will use its original language setting.
7Press the ENTER button.
- English is selected and the screen returns to DVD SETUP.
➢ • If the selected language is not recorded on the disc, the
original pre-recorded language is selected.
• How to make the SETUP MENU disappear or return to
menu screen during set up; Press RETURN button.
Using the Audio Language
Using the Subtitle Language
DVD DVD
RETURN
❷
ENTER
MAIN MENU
DVD SETUP
RETURN
❷ ➛❿ ENTER
Language Clock Exit
DVD VCR Option
DVD
MAIN MENU
DVD SETUP
RETURN
❷ ➛❿ ENTER
Language Clock Exit
DVD VCR Option
DVD
MAIN MENU
DVD SETUP
RETURN
❷ ➛❿ ENTER
Language Clock Exit
DVD VCR Option
DVD
00046S DVD-V14000/HACO-GB3 3/21/03 4:31 PM Page 32

35
GB
34
GB
Setting Up the Display Options
1With the unit in Stop mode, press the SETUP button on the remote.
Result: The MAIN MENU is displayed.
2Press the corresponding  , ❷ or ➛ , ❿ buttons to select the DVD
option.
3Press the ENTER button to select this option.
Result: The DVD SETUP menu is displayed.
4Use the  or ❷ buttons to select Display Options.
Then press the ENTER button.
5Use the  or ❷ buttons to select the desired item.
Then press the
➛ or ❿ buttons or then press the ENTER button.
Use the
 or ❷ buttons to select the desired item.
Then press the ENTER button.
•TV Aspect
Depending on the type of television you have, you may want to
adjust the screen setting (aspect ratio).
4:3 Letter Box : Select when you want to see the total 16:9
ratio screen DVD supplies, even though you
have a TV with a 4:3 ratio screen. Black bars
will appear at the top and bottom of the screen.
4:3 Pan-Scan : Select this for conventional size TVs when you
want to see the central portion of the 16:9
screen. (Extreme left and right side of movie
picture will be cut off.)
16:9 Wide : You can view the full 16:9 picture on your
widescreen TV.
•Black Level
Adjusts the brightness of the screen.
•Quasi-PAL
Depending on a disc, you can play a NTSC DVD disc by
Quasi-PAL mode.
•DVD Out
Component : Sends COMPONENT signal (Y, Pb, Pr) to the
component video out JACK.
S-Video : Sends S-VIDEO signal to the S-VIDEO OUT JACK.
➢ • How to make the SETUP MENU disappear or return to
menu screen during set up: Press the RETURN button.
DVD SETUP
Disc Menu English
Audio English
Subtitle Automatic
Parental Unlocked
Audio Options
Display Options
RETURN
❷
ENTER
RETURN
❷ ENTER
DISPLAY OPTIONS
TV Aspect Wide
Black Level Low
Quasi-PAL Off
DVD Out Component
Setting Up the Audio Options
1With the unit in Stop mode, press the SETUP button on the remote.
Result: The MAIN MENU is displayed.
2Press the corresponding  , ❷ or ➛ , ❿ buttons to select the DVD
option.
3Press the ENTER button to select this option.
Result: The DVD SETUP menu is displayed.
4Use the  or ❷ buttons to select Audio Options. Then press the
ENTER button.
5Use the  or ❷ buttons to select the desired item. Then press
the
➛ or ❿ buttons.
•Dolby Digital Out
PCM : Converts to PCM(2CH) audio.Select PCM when
using the Analog Audio Outputs.
Bitstream : Converts to Dolby Digital Bitstream (5.1CH).
Select Bitstream when using the Digital
Audio Output.
➢Be sure to select the correct Digital Output or
no audio will be heard.
•MPEG-2 Digital Out
PCM : Converts to PCM(2CH) audio. Select PCM when using the
Analog Audio Outputs.
Bitstream : Converts to MPEG-2 Digital Bitstream
(5.1CH or 7.1CH). Select Bitstream when using
the DigitalAudio Output.
•DTS
Off : Doesn’t output digital signal.
On : Outputs DTS Bitstream via digital output only.
Select DTS when connecting to a DTS Decoder.
•Dynamic Compression
On : To select dynamic compression..
Off : To select the standard range.
➢• How to make the SETUP MENU disappear or return
to menu screen during set up: Press RETURN button.
• Manufactured under license from Dolby Laboratories.
”Dolby” and the double-D symbol are trademarks of
Dolby Laboratories.
• “DTS” and “DTS Digital Out” are trademarks of
Digital Theater Systems, Inc.
RETURN ❷
AUDIO OPTIONS
Dolby Digital Out ➛❿ PCM
MPEG-2 Digital Out PCM
DTS O f f
Dynamic Compression On
DVD SETUP
Disc Menu English
Audio English
Subtitle Automatic
Parental Unlocked
Audio Options
Display Options
RETURN
❷
ENTER
DVD DVD
MAIN MENU
DVD SETUP
RETURN
❷ ➛❿ ENTER
Language Clock Exit
DVD VCR Option
DVD
MAIN MENU
DVD SETUP
RETURN
❷ ➛❿ ENTER
Language Clock Exit
DVD VCR Option
DVD
00046S DVD-V14000/HACO-GB3 3/21/03 4:31 PM Page 34