Samsung DVD V6700 - DVD/VCR User manual

==_ _===
Jd"b _"6"_ 66 cb 6

I SAFETY INSTRUCTIONS I
Important Safety Instructions
1) Readthese instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not usethis apparatusnear water.
6) Clean onlywith a drycloth.
7) Do not block anyventilation openings, Installin accordancewith the manufacturer'sinstructions.
8) Do not install near any heatsources such as radiators,heaters, or other apparatus(including
amplifiers)that produceheat.
9) Do notdefeat the safety purposeof the polarizedor grounding- type plug.A polarized plug hastwo blades
with one wider thanthe other.A grounding type plug hastwo bladesand a thirdgrounding prong.
The wideblade and thethird prong are providedfor your safety.Ifthe provided plug does notfit intoyour
outlet, consultan electrician for replacementofthe outlet.
10) Protectthe powercord from being walked on or pinchedparticularly atplugs, convenience receptacles,
and the point wherethey exit fromthe apparatus.
11) Onlyuse attachments/accessoriesspecifiedby the manufacturer.
12) Use onlywith a cart, stand,tripod, bracket, or table specified bythe
manufacturer,or sold withthe apparatus.
13)When a cart is used, unplugthis apparatus and usecaution whenmoving the
cart/apparatuscombinationto avoid injuryfrom tip-over.
14) Refer all servicingto qualifiedservice personnel. Servicing is requiredwhen the apparatus hasbeen
damaged in anyway, such asthe power-supplycord or plug isdamaged, liquid hasbeen spilled or objects
have fallen intothe apparatus.Service is also required ifthe apparatus has been exposedto rain or
moisture, does notoperate normally,or has beendropped.
ENG-2

I SAFETY INSTRUCTIONS
Precautions
I
RISK OF ELECTRIC SHOCK
DO NOT OPEN
TO REDUCE THE RISK OF ELECTRICSHOCK, DONOT
REMOVETHE COVER (OR BACK).
NOUSER-SERVICEABLEPARTSARE INSIDE. REFER
SERVICINGTO QUALIFIEDSERVICE PERSONNEL.
This symbol indicates"dangerousvoltage"
insidethe product that presents a risk of
electricshock or personal injury.
This symbol indicates
important instructions
accompanyingthe product.
Do not install this equipment in a confined space such as a bookcase or similar unit.
WARNING :To prevent damage which may result in fire or electric shock hazard, do not expose
this appliance to rain or moisture.
FCC NOTE (for UoS.A):
This equipment hasbeen tested and foundto complywith the limits for a Class B digitaldevice, pursuant to
Part 15of the FCC rules.These limits are designedto providereasonable protectionagainst harmful
interferencein a residential installation.This equipment generates,uses and can radiate radio frequency
energyand, if notinstalled andused in accordancewith the instructions,may cause harmful interferenceto
radioor television reception,which can be determinedby turningthe equipmentoff and on.
The user is encouragedtotry to correctthe interferenceby one or moreof the following measures.
•Repositionor relocatethe receivingantenna.
• Increasethe separation betweenthe equipmentand receiver.
• Connectthis equipment intoan outlet on a circuit differentfrom that to which the receiver isconnected.
• Consultthe dealer or an experienced radio/TVtechnician for help.
This class B digital apparatus meetsall requirementsofthe Canadian Interference--
Causing EquipmentRegulations.
ENG-3

[SAFETY INSTRUCTIONS J
CAUTION
THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT
IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVER AND DO NOT REPAIR
YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.
Note:
• This unit can be used only where the power supply isAC 120V, 60Hz. It cannot be used
elsewhere.
• This DVD player is designed and manufactured to respond to the Region Management
Information.
If the Region number of a DVD disc does not correspond to the Region number of this DVD player,
the DVD player cannot play the disc.
• The product unit accompanying this user manual is licensed under certain intellectual property
rights of certain third parties. In particular, this product is licensed under the following US patents:
5,060,220 5,457,669 5,561,649 5,705,762 5,987,417 6,043,912 6,222,983 6,272,096 6,377,524
6,377,531 6,385,587 6,389,570 6,408,408 6,466,532 6,473,736 6,477,501 6,480,829 6,556,520
6,556,521 6,556,522 6,578,163 6,594,208 6,631,110 6,658,588 6,674,697 6,674,957 6,687,455
6,697,307 6,707,985 6,721,243 6,721,493 6,728,474 6,741,535 6,744,713 6,744,972 6,765,853
6,765,853 6,771,890 6,771,891 6 775,465 6,778,755 6,788,629 6,788,630 6,795,637 6,810,201
6,862,256 6,868,054 6,894,963 6,937,552.
This license is limited to private non-commercial use by end-user consumers for licensed contents.
No rights are granted for commercial use. The license does not cover any product unit other than
this product unit and the license does not extend to any unlicensed product unit or process
conforming to ISO/IEC 11172-3 or ISO/IEC 13818-3 used or sold in combination with this product
unit.
The license only covers the use of this product unit to encode and/or decode audio files conforming
to the ISO/IEC 11172-3 or ISO/IEC 13818-3. No rights are granted under this license for product
features or functions that do not conform to the ISO/IEC 11172-3 or ISO/IEC 13818-3.
Handling Cautions
• Beforeconnecting othercomponents to this player, be sureto turn them all off.
• Do not movethe player while a disc is being played, or the disc may be scratched or broken, and the
player's internalparts may be damaged.
• Do not puta flower vase filledwith water or any small metal objects on the player.
• Be careful not to putyour hand intothe disc tray.
• Do not placeanything otherthan the disc inthe disc tray.
• Exterior interferencesuch as lightning and static electricitycan affect normaloperation ofthis player.
Ifthis occurs, turn the playeroff and on againwith the POWERbutton, or disconnect and then reconnect
theAC powercord to theAC power outlet.The playerwill operate normally.
• Be sure to removethe disc and turn offthe playerafter use.
• DisconnecttheAC power cordfrom the AC outlet whenyou don't intendto use the playerfor long
periodsof time.
• Cleanthe disc by wiping in a straightline from the inside tothe outside of the disc.
Disc Storage
Becareful notto harm thedisc because thedata on these discs ishighly vulnerabletothe environment.
• Do not keepunder direct sunlight.
• Keep in a coolventilated area.
• Storevertically.
• Keep in a clean protectionjacket.
Maintenance of Cabinet
Forsafety reasons,be sureto disconnect theAC power cordfrom the AC outlet.
• Do not usebenzene, thinner,or other solventsfor cleaning.
• Wipethe cabinet with a soft cloth. ENG-4

BEFORE YOU START [
Before you start
Accessories
Remote Control Batteries-2EA Video/Audio Cable
AK59-00051B 1.5V(AAA) AC39-00073A
AC43-12002H
User'sGuide
AK68-01304B
Install Batteries in the Remote Control
1
Openthe battery cover on _t_
the back of the remote
control
• •
InserttwoAAA batteries.
Makesure that the
polarities (+and -) are
alignedcorrectly.
3
Replacethe battery
cover.
If the remote controldoesn't operate properly:
=, Check the polarity +, - of the batteries
=, Check if the batteries are drained.
=, Check if the remote control sensor is blocked by obstacles.
=, Check if there is any fluorescent lighting nearby.
ENG-5

TABLE OF CONTENTS J
Table of Contents
Safety Instructions ..................................................................... 2
ImportantSafety Instructions ........................................................ 2
Precautions ...................................................................... 3
Beforeyou start ....................................................................... 5
Accessories ...................................................................... 5
InstallBatteriesin the RemoteControl.................................................. 5
Chapter 1: Setup
General Features ...................................................................... 8
DiscType and Characteristics............................................................. 9
Description ........................................................................... 10
Tourof the RemoteControl............................................................... 12
Chapter 2: Connections
BeforeConnectingthe DVD-VCR.......................................................... 13
Connectinga STB tothe DVD-VCR........................................................ 13
Connectionto a TV ..................................................................... 14
Connectingto a TV (Progressive) ..................................................... 14
Connectingto a TV (Interlace)........................................................ 15
Connectingto a TV (S-Video) ........................................................ 16
Connectingto a TV (Video) .......................................................... 17
Connectionto anAudio System ........................................................... 18
Connectingto an Audio System (2 ChannelAmplifier,Analog) ............................... 18
Connectingto an Audio System (Dolbydigital, MPEG2or DTSAmplifier) ...................... 19
Connectingthe PowerCord .............................................................. 20
Chapter 3: initial Setup
Selectinga Menu Language.............................................................. 21
Settingthe Clock....................................................................... 22
Setting the Clock Manually........................................................... 22
Settingthe Front Panel Display ........................................................... 23
Settingthe Auto PowerOff ............................................................... 24
Chapter 4: DVD Operations
Playinga Disc......................................................................... 25
Usingthe Searchand Skip Functions....................................................... 27
Usingthe DisplayFunction .............................................................. 28
Usingthe Discand Title Menu (DVD)....................................................... 30
Usingthe FunctionMenu (DVD)........................................................... 31
Repeat Play .......................................................................... 32
SlowRepeat Play ...................................................................... 34
Adjusting theAspect Ratio (EZ View)....................................................... 35
SelectingtheAudio Language ............................................................ 37
Selectingthe Subtitle Language .......................................................... 38
ENG-6

I TABLE OF CONTENTS I
Changingthe CameraAngle.............................................................. 39
Usingthe BookmarkFunction(DVD) ....................................................... 39
Usingthe Zoom Function(DVD)........................................................... 41
Clips Menufor MP3/WMA/JPEG/MPEG4Files ............................................... 42
FolderSelection ....................................................................... 42
MP3/WMAPlayback.................................................................... 43
MPEG4Playback ...................................................................... 45
ProgramPlay& Random Play ............................................................ 47
PictureCD Playback.................................................................... 48
Usingthe Setup Menu .................................................................. 50
Setting Upthe Language Features......................................................... 51
Setting UptheAudio Options ............................................................. 53
Setting Upthe DisplayOptions ............................................................ 55
Setting Upthe ParentalControl ........................................................... 57
Chapter 5: VCR Operations
Insertingand Ejecting a Video CassetteTape ................................................ 60
Playinga Pre-RecordedVideo CassetteTape ................................................ 61
SpecialVCR Playback Features........................................................... 62
UsingAutomaticTracking ................................................................ 63
Selectingthe CassetteType .............................................................. 64
SettingtheAuto Play.................................................................... 65
Settingthe Auto Repeat ................................................................. 66
Usingthe TapeCounter ................................................................. 67
UsingtheAssemble Edit Function ......................................................... 68
SelectingtheAudio Output Mode .......................................................... 69
Searchingfor a SpecificSequence......................................................... 70
Basic Recording ....................................................................... 72
SpecialRecording Features .............................................................. 73
Using One-TouchRecording.............................................................. 74
Selectingthe Recording Speed ........................................................... 75
Making a Timer Recording ............................................................... 76
Chapter 6: Reference
Troubleshooting ....................................................................... 78
TechnicalSpecifications ................................................................. 80
ENG-7

SETUP
General Features
DVD-VCR Features
,, Perfect compatibility to play back DVDs, audio
CDs or VHS Tapes.
,, Composite, S-Video, and Component Video
outputs.
m On-Screen Program (English/French/Spanish).
OVO Features
,, 10-bit video digital to analog converter and
54MHz advanced digital filter.
,, Playback of 96KHz/24-bit sources.
,, DTS digital output for DTS-enhanced DVDs.
,, This unit can play MPEG4 formats within an avi
file.
Playback MP3-CDs.
VCR Features
,, Hi-Fi Stereo VCR.
,, Superior slow motion and stop action (with 4
heads).
,, Playback of S-VHS tapes with a better than
standard resolution.
,, INTRO Scan, Zero Return, and END Search.
,, Time remaining counter, real time counter.
Note
m Discs which cannot be played with this player.
DVD-ROM/DVD-RAM/VCD
CDI/CDV
Super Audio CD (CD, HD layer)
CDGs play audio only, not graphics.
DVD-RW (VR mode)
Non-finalized DVD-RW, -R, DVD+RW, and +R
discs.
m Ability to play back may depend on recording
conditions.
- DVD-RW, -R/CD-RW/DVD+RW, +R/CD-ROM
Tunerless DVD Player & VCR
m This DVD-VCR unit does not have a TV tuner.
Recording TV broadcasts is possible via Connection
to Cable/Satellite boxes and Multi Channel Video
Services.
Note
This product incorporates copyright protection
technology that is protected by U.S. patents and other
intellectual property rights. Use of this copyright
protection technology must be authorized by
Macrovision, and is intended for home and other
limited viewing uses only unless otherwise authorized
by Macrovision. Reverse engineering or disassembly
is prohibited.
COPY PROTECTION
Many DVDdiscs are encoded with copy protection.
Becauseof this,you should only connectyour DVD-
VCR directly to yourTV, notto a VCR.Connectingto
a VCR resultsin a distortedpicture from copy-
protected DVD discs.
This product incorporatescopyrightprotection
technologythat isprotected by methodsclaims of
certain U.S.patents and other intellectualproperty
rightsowned by MacrovisionCorporation and other
rightsowners. Use of this copyright protection
technology mustbe authorizedby Macrovision
Corporation, and is intendedfor home and other
limitedviewing usesonly unless otherwise authorized
by Macrovision Corporation.Reverseengineering or
disassembly isprohibited.
PROGRESSIVE SCAN OUTPUT
SETTI N G
PLEASE NOTETHATNOTALL
HIGHDEFINITIONTELEVISION SETSARE FULLY
COMPATIBLEWITH THIS PRODUCTAND MAY
CAUSE ARTIFACTSTO BE DISPLAYEDINTHE
PICTURE. IF PROGRESSIVESCAN PICTURE
PROBLEMSOCCUR,WE RECOMMEND
SWITCHINGTHE CONNECTIONTO THE
'STANDARDDEFINITION'OUTPUT.IFTHEREARE
QUESTIONS REGARDINGYOUR TV SET
COMPATIBILITYWITHTHIS DVD-VCR,PLEASE
CONTACTSAMSUNG'SCUSTOMER SERVICE
CENTER.
ENG-8

I SETUP I
Disc Type and Characteristics
This DVD-VCR iscapable of playingthe followingtypes of discs with the corresponding Iogos:
DiscTypes(Logos)
DVD
VIDEO
AUDIO=CD
DIGITAL AUDIO
RecordingTypes
Audio
+
Video
Audio
DiscSize
5 _
3 1/2"
5 _
3 1/2"
MaxlPlayingTime
Single-sided240min.
Double-sided480min.
Single-sided80min.
Double-sided160min.
74 min.
20 min.
Characteristics
DVD contains excellentsound
and video due to Dolby Digital
and MPEG-2system.
Variousscreen and audio
functions can be easily selected
throughthe on-screen menu.
CD is recordedas a Digital
Signal with better audio quality,
less distortionand less
deterioration of audio quality
over time.
,, CD-R,CD-RW and DVD-RW, -R, DVD+RW, +R discs may not be playable in all cases due to the disc
type or condition of the recording.
,, Do not run the player with two discs loaded at the same time.
Disc Markings Region Number
PlayRegion Number
NTSCbroadcastsystem in U.S.A,Canada, Korea,
Japan, etc.
Dolby Digitaldisc
Stereodisc
DigitalAudio disc
DTSdisc
MP3disc
Boththe DVD-VCRand the discs are
codedby region.These regionalcodes
must matchin order for the disc to play.
If the codes do not match, the disc will
notplay.
The RegionNumber forthis player is
describedon the rear panel ofthe player.
DivX Certification
You must only insertone DVD disc ata time, Inserting two
or morediscs will notallow playbackand may cause DivX, DivX Certified, and
damage to the DVD,VCR. associated logesare
trademarks of DivXNetworks,Inc and are
used under license.
ENG-9

I SETUP I
Description
Front Panel Controls
1
2
3
4
5
6
7
8
O
m
!
OO
DISCTRAY
Placethe disc here•
VCR Deck
Inserta standardVHS video tape.
A, EJECT
9 LINE IN SELECT rand ^
Pressto select LINE IN 1 or LINE IN 2.
10 DVD/VCR
Pressto view DVD or VCR mode.
11 EZ VIEW
Press to eject a videotape ifthe tape is stopped.
cb/I (POWER)
Press toturn the DVD-VCR on and off.
LINE IN 2
Connectsto the Video/Audiooutput jack of your
externaldevice.
P.SCAN
Selectsthe progressivescan mode.
A, OPEN/CLOSE
Press to open and close the disc tray.
Front Panel Display
Operationindicators are displayed here
Pressthis button to easily adjust the aspectratio
ofa pictureto your TV's screen size.
12 ® REC(VCR)
Pressto begin recording.
13 414 (Reverse/Rewind)
Pressto reverse/rewinda disc/video tape.
14 [] (STOP)
Pressto stop a disc/video tapeduring playbackor
record (VCR).
15 _||(Play/Pause)
Pressto play or pausethe disc/videotape.
16 _ (Forward/Fast Forward)
Pressto forward/fast forward a disc/videotape.
Front Panel Display
i I
I I
0 0
1 DVD is activated.
2 The time,counter position,time remaining or
current deck status isindicated.
3 VCR is activated.
4 DVDor CD media is loaded.
5 Videotape is loaded.
ENG-10

I SETUP I
Rear Panel
0@ _ 0
®
I
I
@
i_-oout
®®®®
,@d' '@@
_0
!
!
T
AUDIO OUT 3
Connects to theAudio inputjacks of your
television. Youcan usethis connectionas audio
output jacks when Componentor S-Video is 4
connected.
COMPONENTVIDEO OUT
- Use these jacks if you havea TV with
ComponentVideo in jacks. The Component
connectionprovides the best picture from the
DVD player.
These jacks provide PR,PBandY video.
-IfComponent (ProgressiveScan)Video Output
is selectedin the AItVideo Out menu (see
page 54~55) or by usingthe RSCAN button
on the front panel, progressivescan modewill
be enabled.
-IfComponent (InterlaceScan) Video Output is
selected inthe Air Video Out menuor by using
the RSCAN button on the front panel,
interlaced scan mode will be enabled.
LINE IN 1(VIDEO/AUDIO)
Connectsto the Video/Audiooutput jack of your
external device.
LINE OUT (VIDEO/AUDIO)
Use the Video/Audiocableto connectto the
Video/Audioinputjacks on your television.
Youmust havethese jacks connectedto see
videoplayback from theVCR on yourTV.
Youcan usethis connectionas an audiooutput
terminal whenComponent or S-Video is
connected.
S-VIDEO OUT
Use the S-Video cableto connectthis jack to the
S-Video input jack on your televisionfor higher
picture quality.
DIGITALAUDIO OUT (COAXIAL)
- Use a Coaxial digital cableto connect to a
compatible Dolby Digitalreceiver.
-Use a Coaxial digital cable to connect to an
A/V Amplifier that contains a Dolby Digital,
MPEG2or DTSdecoder.
DVD/VCR Output Chart
Type of Connection DVD Output Jacks VCR Output Jacks
S-VIDEO OUT O X
COMPONENT VIDEO OUT O X
AUDIO OUT (L,R) O X
DIGITAL AUDIO OUT (COAXIAL) O X
LINE OUT (A/V) O O
_41 O •Active.
X Inactive.
Notes
m Consult your TV User's Manual to find out if your TV supports Progressive Scan. If Progressive Scan is
supported, follow the TV User's Manual regarding Progressive Scan settings in the TV's menu system.
m See pages 55 ~ 56 to get more information on how to use the AIt Video Out menu.
ENG-11

ISETUP I
Tour of the Remote Control
1POWERbutton
Pressto turn the DVD-VCR
on and off.
2 NUMBER Buttons
3 AUDIO button
Usethis buttonto access
various audio functions on a O--
disc. (DVD)
4I_ Skip button
Pressto skip a disc O m
backwards. Useto skip a
title, chapter or track on a
disc.
5REC button _--
Pressto begin recording.
(VCR) O --
64_1 Search button
Pressto reverse search a •
disc. O __
7 [] (STOP) button _
Pressto stop a disc/video
tape during play or record
(VCR). _ __
8MENUbutton
Bringsup the DVD-VCR
player's menu.
9ENTER/& _'_/ TRACK
A T buttons @
Functionastoggle switch
and adjusttape tracking. O --
10 DISCMENUbutton @ --
Bringsup the Disc menu.
(DVD)
11 SUBTITLE button
Pressto display the subtitle
languagename
abbreviation on screen.
12 OPEN/CLOSE button
Useto open andclose the
disc tray or eject a video
tape.
13 MODEbutton
Useto select the program
or randomplay.
REPEATbutton
Allows you to repeat playa
title, chapter,track, or disc.
(DVD)
18
O
@
19
®
14 VCR button
Use to operatethe VCR.
15 DVD button
Use to operatethe DVD.
16 RADV/SKIP/INPUT SEL.
button
Pressto advance play one
frame ata time (DVD and
VCR). Press to fast forward
a videotape (VCR).Press
to select an external signal
source.
17 _ Skip button
Pressto forward skip a disc
forward. Use to skip a title,
chapter or track on a disc.
PROGRESSIVE/SPEED
button
Pressto select progressive
scan mode (DVD).Press to
selectthe tape recording
speed(VCR).
I_ Search button
Pressto search a disc
forward.
20 ll_-|| (Play/Pause) button
Pressto play or pausethe
disc/video tape.
21 RETURNbutton
Returnsto a previous menu.
22 CLEAR button
Use to remove menusor
status displaysfrom the
screen.
23 INFO. button
Displaysthe current disc
mode. (DVD)
24 MARK/SEARCHbutton
Pressto memorize scenes
for replay.(DVD)
Displaysthe VCR Function
menu. (VCR)
25 ANGLE/TIMER button
Use to access various
camera angleson a disc
(DVD). DisplaystheTimer
Programmenu (VCR).
ENG-12

CONNECTIONS
Before Connecting the DVD=VCR
Alwaysturn off the DVD-VCR,TV, and othercomponents before youconnect or disconnect any cables.
Refer to the user's manualof the additionalcomponents (such as a TV) you are connectingfor more
informationon those particularcomponents.
Connecting a STB to the DVD-VCR
The following instructionsshow how to connecta Set-TopBox,TVand Amplifier tothe DVD-VCR
1
Use a TV antennacable to connectthe signa
source comingfrom the antennaor wall to the
ANT IN jack on the STB.
2
Use the Video/AudioCableto connectthe LiNE
OUTjacks onthe STBto the AUDIO!VIDEO
LINE IN 1 jacks on the DVD-VCR.
3
Select LiNE 1 by pressing LINE IN SELECT
V, A button on the front panel in VCR
mode.
4
Use the Video/AudioCableto connectthe LINE
AUDIO OUT(R/L)/VlDEO OUT jacks on the DVD-
VCRtothe Audio & Video jacks on the TV.
Tunertess DVD Player& VCR
This DVD-VCRunit does not have a TV tuner. RecordingTV broadcasts is possiblevia Connectionto
Cable/Satellite(Set-top) boxesand Multi ChannelVideo Services.
Notes
If you want to use other connections to a TV, please refer to the Connection to a TV page. (See pages 14
to 17)
If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 18 to 19)
When you connect a STB through the LINE IN 1 jack of the DVD-VCR, you still can see the picture from
the STB on your TV set if the DVD-VCR is turned off.
ENG-13

ICONNECTIONS I
Connection to a TV
Thefollowing showsexamplesof connections commonly usedto connect the DVD-VCRwith aTV and other
components.
Connecting to a TV (Progressive)
Usingcomponentvideo cables cnot includedJ.
connectthe COMPONENTVIDEO OUT lack on
the rear ofthe DVD-VCRto the COMPONENTIN
jack of yourTV.
2
Usingtne audio cables connect from [he AUDIO
OUT or LINE OUT AUDIO (red and white) jacks
on the rear ofthe DVD-VCRto the AUDIO (red
and white) INjacks of yourTV.
Turn on the DVD-VCRand TV.
3
Withthe unit in Stop mode. set theAItvideo
outputto Component: Progressivein the Display
Setupmenu (seepages 55 _ 561or press the
PROGRESSIVEbutton on the remotecontrol.
The ProgressiveScan mode promptscreen
appears.Then press ENTERant orogresswe
video will be output,
4
j/
......®I
S.Vl_OcL AU_D
o
ComPonent Cable
dio Cable /noi mcluaea
Pressthe input selectoron yourTV remote
control until the Component signal from the
DVD-VCRappearson yourTV screen
Tosee theprogressive video output,
,consult your Tv User s Manual tOfind out if your TV supports Progressive Scan.
The p0siti0n of the Jacksmay vary dependingon the TV set,
Note
What is "Progressive Scan"?
Progressive scan has twice as many scanning lines as the interlace output method.
The Progressive scanning method provides clearer picture quality.
The Component Video jacks only output video from the DVD player. To view video from the VCR, you must have
the Video Out (yellow) jack connected. ENG-14

ICONNECTIONS I
Connecting to a TV (interlace)
-Connectingto your TV usingComponentvideo cables.
-You will enjoyhigh quality and accuratecolor reproductionimages. Componentvideo separatesthe picture
element intoblack and white(Y), blue(PB),and red(PR)signals to present clearand clean images. (Audio
signals are deliveredthroughthe audio out (redand white) or line out(red and white) jacks).
1
Usingcomponentvideo cables (notindudeuL
connectthe COMPONENTVIDEO OUT laCkon
the back of the DVD-VCRto the COMPONENT
INjack of yourTV.
2
Usingthe audio cables connect from the AUDIO
OUT or LINE OUT AUDIO (redand white) jacks
on the back of the DVD-VCRto the AUDIO (red
and white) INjacks of yourTV.
Turnon the DVD-VCRand TV,
3
With the unit in Stop mode. set theAIt video
output :o Component: Interlace inthe Display
Setup menu/see pages55 ~56) or press the
PROGRESSIVEbutton on the remote control
until Interlaceis output.
4
Dressthe inputselectoron yourTV remote
control untilthe Componentsignal from the DVD-
VCR appearson the TV screen.
White _Red __
2_. Gree
Component Cable
(not included)
Notes
If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 18 ~ 19)
Depending on the manufacturer. The number and position of jacks may vary depending on the TV set.
Please refer to the user's manual of your TV.
- The Component Video Out jacks only output video from the DVD player. To view video from the VOR, you
must have the Video Out (Yellow) jack connected.
- You can hear sound from the LINE OUT AUDIO or AUDIO OUT (red and white)jacks with a Component
connection. VCR audio only outputs through the Line Out Audio jacks (red and white).
ENG-15

ICONNECTIONS I
Connecting to a TV (S=Video)
Connectingto yourTV usingan S-Video cable.
Youwill enjoy high quality images. S-Videoseparatesthe picture element into black and white(Y) and
color(C) signals to present clearer imagesthan regular video inputmode. (Audiosignals are
deliveredthrough audio out(redand white) or line out(red and white) jacks).
1
Using an S-Video cable (notincluded_,connect
the S-VIDEO OUT jack onthe rear ofthe DVD-
VCRto the S-VIDEO INjack ofyour TV.
2
Using the audio cables,connectfrom the AUDIO
OUT or LINEOUTAUDIO (redand white) _acKs
on the rear ofthe DVD-VCRto the AUDIO (red
and white) IN jacksof your TV.
Turnon the DVD-VCR andTV.
3
Withthe unitin Stop mode.set the AItvideo
outputto S-Video in the DisplaySetup menu Isee
pages55 _ 56) or pressthe PROGRESSIVE
button onthe remote control untilS-Video is
output
I S-VIDEOOU_
®
S-Video Cable
(not included) |
White Red
4
Press the inputselector on yourTV remote
control untilthe S-Videosignal from the DVD-
VCR appears on yourTV screen.
Notes
If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 18 ~ 19)
The number and position of the jacks may vary depending on the TV set.
Please refer to the user's manual of your TV.
The S-Video jack only outputs video from the DVD player. To view video from the VOR, you must have the
Video Out (Yellow) jack connected.
You can hear sound from the LINE OUT AUDIO (red and white) or AUDIO OUT (red and white)jacks for S-
Video connection. VCR audio only outputs through the Line Out Audio jacks (red and white).
Please do not connect S-Video and Component Video (Y, Pb, Pr) outputs simultaneously, as they may
interfere and degrade both video output quality. ENG-16

ICONNECTIONS I
Connecting to a TV (Video)
Usingvideo/audio cables,connecttheVIDEO
(yellow)/AUDIO (red and white) OUT lackson
the rear ofthe DVD-VCRtothe VIDEO
(yellow)/AUDIO (red and white) INjacks of your
TV.
2
Turn on the DVD-VCR and TV.
3
Pressthe inputselector on yourTV remote
control untilthe Video signal fromthe DVD-VCR
apuearson the TV screen.
4:'°°
@
I Yellow
1 _" I Audi° Cable /ideo Cable
Notes
Noise may be generated if the audio cable is placed too close to the power cable.
Ifyou want to connect to an Amplifier, please refer to the Amplifier connection page.
(See pages 18 ~ 19).
The number and position of the jacks may vary depending on your TV set. Please refer to the user's manual of
your TV.
Ifthere is one audio input jack on the TV, connect it to the LINE OUT AUDIO OUT Left (white) jack of the DVD-
VCR.
Ifyou press the P.SCAN button when the DVD-VCR is in Stop mode or no disc is inserted, the AIt Video Out
(see page 54 to 55) mode changes in the following sequence: (S-Video - Interlace- Progressive)
When you connect an external device (STB or VCR) and play it through the LINE IN 1jack of the DVD-VCR,
you can still see the display on your TV set although the DVD-VCR set has been turned off.
ENG-17

ICONNECTIONS I
Connection to an Audio System
Connecting to an Audio System (2 Channel Amplifier, Analog)
1
Using theaudio cables, connectthe (LINE)
AUDIO(red and white) OUTjacks onthe back
ofthe DVD-VCRtothe AUDIO (red and white)
IN lacksof theAmplifier.
2
Usingvideo signal cable(s),connectthe VIDEO,
S-VlDEOor COMPONENTOUTjaCKSon the
back ofthe DVD-VCRtothe VIDEO, S-VlB EOor
COMPONENTINjack of yourTV as described on
pages 13to 16.
3
Turn on the DVD-VCR.TV. andAmplifier.
4
Pressthe inputselect button oftheAmplifier to
selectthe External input in orderto hear sound
from the DVD-VCR.
Referto your Amplifier'suser manualto set the
Amplifier'saudio input.
Mw
Red White
Audio Cable
_ite
2-channel
Stereo Amp.
Notes
- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage
to the speakers and your ears.
- Please set the audio in the menu screen according to the Amplifier. (See pages 53 ~ 54)
- The position of the jacks may vary depending on the Amplifier.
Please refer to your Amplifier's user manual.
- You can also connect the amplifier using AUDIO OUT (red and white) jacks from the DVD-VCR.
ENG-18

ICONNECTIONS I
Connecting to an Audio System (Dolby digital, MPEG2 or DTS
Amplifier)
1
Using a coaxial cable mot included connectthe
DIGITALAUDIO OUT (COAXIAL)jack onthe
backof the DVD-VCRto the DIGITALAUDIO IN
(COAXIAL). ack oftheAmplifier.
2
Usingvideo signal cable(s_,connectthe S-VIDEO
or COMPONENTOUT ackson the back ofthe
DVD-VCRtothe S-VlDEOor COMPONENTIN
jack of your TV asdescribed on pages 13to 16.
3
Turn on the DVD-VCR.TV. and Amolifier.
AUI}D ou- O0_P_ENT IE = lINE =
VIDEO
s-vIo o o_'
@AUOIO
Coaxial Cable
(not included)
4
Pressthe input select buttonof the Amplifierto
select externa input in order to hear soundfrom
the DVD-VCR.
Referto yourAmplifier s usermanualto setthe
Amolifier'saudio input.
coaxial
AU
Dolby digital or
DTSAmp.
Notes
When you connect the DVD-VCR to a DTS Amplifier and play a DTS disc, set the DTS to On in the
Audio Setup menu.
Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage
to the speakers and your ears.
Please set the audio in the menu screen according to the Amplifier. (See pages 53 - 54)
The position of jacks may vary depending on the Amplifier. Please refer to the user's manual of the Amplifier.
ENG-19

ICONNECTIONS I
Connecting the Power Cord
Your DVD-VCR's powercord should be plugged
intoa standard 120V/6OHzwall outlet.
Turn on the power by pressing the POWER
button on the remote control o[_Zl on the front
panel.
Turn on yourTV bypressing the POWER button
on the TV remote control.
Press the inputselector onyour -ry remoteuntil
the signalfrom the DVD:VCRappears,
ENG-20