Samsung UN46C9000ZF User manual

2010 Samsung TV
F/W Upgrade Guide
Samsung Electronics

Step1. How to prepare the USB Memory Drive
2. Connect the USB Memory Drive
to the USB port of your PC.
Copy the file onto the USB Memory Drive.
3. Go to the USB Memory Drive and then double click the file.
1. Save the firmware file onto your computer.
File Name : T-VAL9AUSC.exe
4. Click on the “Unzip” button. 5. Unzipping is in progress.
6. After completing, click on the
“OK” and “Close” buttons.
7. A folder containing the firmware files
has been added to the USB memory drive.
Folder name : T-VAL9AUSC
8. Safely disconnect the USB memory drive
by right clicking the green check mark
on the taskbar and then left click
“Safely Remove”.
OK

[Step 1] Turn the TV on
[Step 2] Insert the USB Memory Drive
containing the Software into the USB1
or 2 port on the side of the TV
[Step 3] Press the ▲or ▼button
on Remote to select “Software Upgrade”,
then press the ENTER button [Step 6] When the Software upgrade
is complete; the TV will turn off and
then back on by itself.
[Step 4] The message “Scanning for USB.
This may take more 1 min.” is displayed.
And then software is upgraded
automatically.
[Step 5] The message below is displayed.
Select “OK”, then press the ENTER
button.
If “Software Upgrade” is not activated,
please wait for 1~2 minutes.
Step2. How to upgrade the firmware