Samsung Galaxy 8 User manual

Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Country Customer Care Centre Web Site
AUSTRALIA 1300 362 603 www.samsung.com/au
CHINA 400-810-5858
010-6475 1880
www.samsung.com/cn
HONG KONG 3698 - 4698 www.samsung.com/hk
www.samsung.com/hk_en/
INDIA 3030 8282
1-800-3000-8282
1800 110011
www.samsung.com/in
INDONESIA 0800-112-8888 www.samsung.com/id
JAPAN 0120-327-527 www.samsung.com/jp
MALAYSIA 1800-88-9999 www.samsung.com/my
NEW ZEALAND 0800 SAMSUNG (0800 726 786) www.samsung.com/nz
PHILIPPINES 1-800-10-SAMSUNG(726-7864)
1-800-3-SAMSUNG(726-7864)
1-800-8-SAMSUNG(726-7864)
02-5805777
www.samsung.com/ph
SINGAPORE 1800-SAMSUNG(726-7864) www.samsung.com/sg
THAILAND 1800-29-3232
02-689-3232
www.samsung.com/th
TAIWAN 0800-329-999 www.samsung.com/tw
VIETNAM 1 800 588 889 www.samsung.com/vn
SOUTH AFRICA 0860-SAMSUNG(726-7864 ) www.samsung.com/za
U.A.E 800-SAMSUNG (726-7864)
8000-4726
www.samsung.com/ae
LED TV
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/register
Model Serial No.
BN68-02227A-02
BN68-02227A-02Eng-Cover.indd 1 2009-08-21 ¿ÀÈÄ 4:21:49

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.
Product design and specifications may be changed without notice.
License
Without producing harmful VOC (Volatile Organic Compounds), Samsung’s Eco-friendly “Crystal Design”
expresses colour gradation thanks to our dual injection technology.
TruSurround HD, SRS and symbol are trademarks of SRS Labs, Inc. TruSurround HD technology is
incorporated under license from SRS Labs, Inc.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of
Dolby Laboratories.
DivX® Certied to play DivX® video, including premium content.
Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen
Do not display still image and partially still on the LED panel for more than 2 hours as it can cause screen image retention.
This image retention is also known as “screen burn”. To avoid such image retention, reduce the degree of brightness and
contrast of the screen when displaying a still image.
Watching the LED TV in 4:3 format for a long period of time may leave traces of borders displayed on the
left, right and centre of the screen caused by the difference of light emission on the screen. Playing a DVD or
a game console may cause a similar effect to the screen. Damages caused by the above effect are not
covered by the Warranty.
Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images. To
prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.
© 2009 Samsung Electronics Co., Ltd. All rights reserved.
❑
❑
●
●
●
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX,Inc. This is an official DivX Certified device that plays
DivX video. Visit www.divx.com for more information and software tools to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play DivX Video-on-Demand
(VOD) content. To generate the registration code, locate the DivX VOD section in the device setup menu. Go to vod.divx.com
with this code to complete the registration process and learn more about DivX VOD.
[8000_Aus]BN68-02227A-02Eng.indb1 1 2009-08-20 ¿ÀÈÄ 5:12:00

CONNECTING AND PREPARING YOUR TV
Viewing the Control Panel ................................................................. 2
Accessories ....................................................................................... 3
Viewing the Connection Panel........................................................... 4
Viewing the Remote Control.............................................................. 6
Pairing the Remote Control ............................................................... 7
Finding the Remote Control............................................................... 7
Mini Remote Control.......................................................................... 8
Installing Batteries in the Remote Control ......................................... 8
OPERATION
Viewing the menus ............................................................................ 9
Plug & Play Feature......................................................................... 10
CHANNEL CONTROL
Conguring the Channel Menu........................................................ 10
Managing Channels......................................................................... 13
PICTURE CONTROL
Conguring the Picture Menu .......................................................... 15
Viewing Picture-in-Picture................................................................ 18
Using Your TV as a Computer (PC) Display .................................... 18
Setting up the TV with your PC........................................................ 19
SOUND CONTROL
Conguring the Sound Menu........................................................... 20
Selecting the Sound Mode .............................................................. 21
SETUP
Conguring the Setup Menu............................................................ 22
Network Connection ........................................................................ 25
Setting the Network ......................................................................... 28
INPUT / SUPPORT
Conguring the Input Menu ............................................................. 31
Conguring the Support Menu......................................................... 31
MEDIA PLAY (USB & DLNA)
Connecting a USB Device ............................................................... 33
Media Play Function ........................................................................ 34
Sorting the Photo List ...................................................................... 35
Photo List Option Menu ................................................................... 36
Viewing a Photo or Slide Show........................................................ 37
Slide Show Option Menu ................................................................. 38
Sorting the Music List ...................................................................... 39
Music List Option Menu ................................................................... 39
Playing Music .................................................................................. 40
Music Play option Menu .................................................................. 41
Sorting the Movie List ...................................................................... 41
Movie List Option Menu................................................................... 42
Playing a Movie File ........................................................................ 43
Movie Play Option Menu ................................................................. 44
Using the Setup Menu ..................................................................... 45
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
MEDIA PLAY-DLNA
Setting the DLNA Network............................................................... 46
Installing the DLNA Application........................................................ 46
Using the DLNA Application............................................................. 47
Using the DLNA Function ................................................................ 50
ANYNET+
Connecting Anynet+Devices........................................................... 51
Setting Up Anynet+.......................................................................... 52
Switching between Anynet+Devices............................................... 52
Recording ........................................................................................ 53
Listening through a Receiver (Home theatre).................................. 54
Troubleshooting for Anynet+............................................................ 54
CONTENT LIBRARY
Using the Content Library................................................................ 55
Using the TV Memory Contents....................................................... 55
Using the Content Management...................................................... 56
INTERNET@TV
Getting Started with Internet@TV.................................................... 57
Setting up Internet@TV ................................................................... 57
Using the Internet@TV service........................................................ 58
Troubleshooting for internet@TV..................................................... 59
Help Website ................................................................................... 59
HOME NETWORK CENTRE
Home Network Centre ..................................................................... 60
Setting Up the Home Network Centre ............................................. 61
Using the Message Function ........................................................... 62
Using the Media Function................................................................ 63
RECOMMENDATIONS
Teletext Feature ............................................................................... 64
Installing the Stand .......................................................................... 65
Disconnecting the Stand.................................................................. 65
Installing the Wall Mount Kit ............................................................ 65
Anti-Theft Kensington Lock ............................................................. 66
Assembling the Cables.................................................................... 66
Preparing before installing Wall-Mount............................................ 67
Securing the Installation Space ....................................................... 67
Securing the TV to the Wall ............................................................. 68
Troubleshooting ............................................................................... 69
Specications .................................................................................. 72
GNU GENERAL PUBLIC LICENSE
END OF TERMS AND CONDITIONS
GNU Lesser General Public License (LGPL)
END OF TERMS AND CONDITIONS
LICENSE ISSUES
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
CONTENTS
Symbol
N O T
Note One-Touch
Button
TOOLS
Button Press
❑
English - 1
[8000_Aus]BN68-02227A-02Eng.indb1 1 2009-08-20 ¿ÀÈÄ 5:12:01

English - 2
CONNECTING AND PREPARING YOUR TV
Viewing the Control Panel
The product colour and shape may vary depending on the model.
The front panel buttons can be activated by touching them with your nger.
1 REMOTE CONTROL SENSOR
Aim the remote control towards this spot on the TV.
2 P (POWER)
Press to turn the TV on and off.
3 > CH <
Press to change channels. In the on-screen menu, use the > CH < buttons as you would use the ▼ and ▲ buttons on the
remote control.
4 – VOL +
Press to increase or decrease the volume.
In the on-screen menu, use the – VOL + buttons as you would use the ◄ and ► buttons on the remote control.
5 MENU
Press to see an on-screen menu of your TV’s features.
6 SOURCE E
Toggles between all the available input sources. In the on-screen menu, use this button as you would use the ENTER E
button on the remote control.
7 SPEAKERS
¦
N
N
7
6 5 4 3
1 2
7
[8000_Aus]BN68-02227A-02Eng.indb2 2 2009-08-20 ¿ÀÈÄ 5:12:01

English - 3
Accessories
Remote Control &
Batteries (AAA x 2)
Mini Remote Control &
Batteries (3V) Programme CD Cover-Bottom
(M4 X L8)
Holder-Wire Cable
(Depending on the model) Holder-Wire (3ea) Stand Screw X 5 (Depending on the model)
AV Cable Sound Cable Component Cable
Holder-Ring (4ea) Holder-Wire Stand Cleaning Cloth
Owner’s Instructions ● Warranty card ● Safety Guide ● Registration Cards ●
Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer.
Warranty card / Safety Guide / Registration Cards (Not available in all locations)
The items colour and shape may vary depending on the model.
¦
N
N
N
[8000_Aus]BN68-02227A-02Eng.indb3 3 2009-08-20 ¿ÀÈÄ 5:12:05

English - 4
Viewing the Connection Panel
The product colour and shape may vary depending on the model.
Whenever you connect an external device to your TV, make sure that power on the unit is turned off.
When connecting an external device, match the colour of the connection terminal to the cable.
For best cable connection to this product, be sure to use a cable with a maximum thickness as below:
Below 40 inch model: Max 0.47inch (12mm)
40 inch and above model: Max 0.55inch (14mm)
●
●
1 KENSINGTON LOCK (depending on the model)
The Kensington Lock (optional) is a device used to physically x the system when used in a public place.
If you want to use a locking device, contact the dealer where you purchased the TV.
The location of the Kensington Lock may be different depending on its model.
2 LAN
Connect a LAN cable to this port to connect to the Network.
3 ANT IN
To view television channels correctly, a signal must be received by the set from one of the following sources: An outdoor
aerial / A cable television network
4 AV IN [R-AUDIO-L] / [VIDEO]
Connect RCA cable to an appropriate external A/V device such as VCR, DVD or Camcorder.
Connect RCA audio cables to [R-AUDIO-L] on your set and the other ends to corresponding audio out connectors on the
A/V device.
¦
N
N
N
N
–
–
–
–
–
–
–
132 4 5 6
7
8
8
9
0
TV Rear Panel
Power Input
[8000_Aus]BN68-02227A-02Eng.indb4 4 2009-08-20 ¿ÀÈÄ 5:12:06

English - 5
5 COMPONENT IN
Connect component video cables (optional) to component connector (PR, PB, Y) on the rear of your set and the other ends
to corresponding component video out connectors on the DVD.
If you wish to connect both the Set-Top Box and DVD, you should connect the Set-Top Box to the DVD and connect the
DVD to component connector (PR, PB, Y) on your set.
The PR, PBand Y connectors on your component devices DVD are sometimes labeled Y, B-Y and R-Y or Y, Cb and Cr.
Connect RCA audio cables (optional) to [R-AUDIO-L] on the rear of your set and the other ends to corresponding audio
out connectors on the DVD.
6 PC IN / PC/DVI AUDIO IN
Connects to the video and audio output jacks on your PC.
If your PC supports an HDMI connection, you can connect this to the HDMI IN 1(DVI), 2, 3 or 4terminal.
If your PC supports a DVI connection, you can connect this to the HDMI IN 1(DVI) / PC/DVI AUDIO IN terminal.
7 HDMI IN 1(DVI), HDMI IN 2, HDMI IN 3, HDMI IN 4
Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players)
No additional Audio connection is needed for an HDMI to HDMI connection.
When using an HDMI / DVI cable connection, you must use the HDMI IN 1(DVI) jack.
What is HDMI?
‘High Denition Multimedia interface’ allows the transmission of high denition digital video data and multiple channels of
digital audio.
The HDMI / DVI terminal supports DVI connection to an extended device with the appropriate cable (not supplied).
The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP (High Bandwidth Digital
Copy Protection) coding feature installed, and supports multi - channel digital audio.
The TV may not output sound and pictures may be displayed with abnormal colour when DVD / Blu-ray player / Cable
Boxes / Satellite receivers supporting HDMI versions older than 1.3 are connected. When connecting an older HDMI
cable and there is no sound, connect the HDMI cable to the HDMI IN 1(DVI) jack and the audio cables to the DVI AUDIO
IN jacks on the back of the TV. If this happens, contact the company that provided the DVD / Blu-ray player / Cable Box /
Satellite receiver to conrm the HDMI version, then request a rmware update. HDMI cables that are not 1.3 may cause
annoying icker or no screen display.
Supported modes for HDMI / DVI and Component.
480i 480p 576i 576p 720p 1080i 1080p
HDMI / DVI 50Hz X X X O O O O
HDMI / DVI 60Hz X O O X O O O
Component O O O O O O O
8 USB1(HDD) / USB2
Connector for software upgrades and Media Play, etc.
For USB HDD, use the USB1 (HDD) port.
You can connect to Samsung’s network wirelessly using the ‘Samsung Wireless LAN Adapter’ (Sold separately).
9 DIGITAL AUDIO OUT (OPTICAL)
Connects to a Digital Audio component.
When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL) jack: Decrease the volume of the TV
and adjust the volume level with the system’s volume control.
5.1CH audio is possible when the TV is connected to an external device supporting 5.1CH.
0 SERVICE
Connector for service only.
–
–
–
–
–
N
N
–
–
–
N
N
N
–
N
–
–
N
N
–
[8000_Aus]BN68-02227A-02Eng.indb5 5 2009-08-20 ¿ÀÈÄ 5:12:06

English - 6
Viewing the Remote Control
The product colour and shape may vary depending on the model.
1 POWER : Turns the TV on and off.
2 NUMERIC BUTTONS : Press to
change the channel.
3 FAV.CH : Used to display
Favourites Channel Lists on the
screen.
4 INFO : Press to display information
on the TV screen.
Channel only can switch if
press info then and using
Wheel.
5 TOOLS : Use to quickly select
frequently used functions.
6 INTERNET@ : Press to use
various internet services to view
useful information and entertaining
content. (Australia, Singapore only)
7 COLOUR BUTTONS : Use these
buttons in the Channel list,
Internet@TV, Media Play menu,
etc.
8 Y : Press to increase or
decrease the volume.
9 MUTE M : Press to temporarily
cut off the sound.
! CH LIST : Displays the Channel
List on screen.
@ Use these buttons in the Media
Play and Anynet+modes. ( ∏ :
This remote can be used to control
recording on Samsung recorders
with the Anynet+feature)
# SENSING WINDOW : Senses
brightness of surroundings
and turns on the backlight
of the remote control button
automatically if vibration/shaking is
detected.
$ TV : Selects the TV mode directly.
% PRE-CH : Enables you to return
to the previous channel you were
watching.
^ MENU : Displays the main on-
screen menu.
& GUIDE: Electronic Programme
Guide (EPG) display.
* RETURN : Returns to the previous
menu
N
( WHEEL(UP▲/DOWN▼/LEFT◄/
RIGHT►)/ ENTER E : Press the
Up/Down/Left/Right sections of the
wheel button and Enter to select
on-screen menu items and change
menu values. You can navigate
up and down the menu, switch
channels and adjust the volume by
turning the wheel button.
) EXIT : Press to exit the menu.
a SOURCE : Press to display and
select the available video sources.
b > P < : Press to change
channels.
c CONTENT : This function enables
you to view the Content Library.
d MEDIA.P : Allows you to play
music les, pictures and movies.
e SUBT.: Digital subtitle display
f AD: Audio Description selection.
g PAIRING/RESET: Used for pairing
the TV and the Remote Control.
(see page 7)
For detailed procedures on
Pairing, refer to the ‘Pairing a
Remote Control’ instructions.
Teletext Functions
4 5 : Teletext reveal
5 4 : Teletext size selection
7 Fastext topic selection
0 / : Alternately select
Teletext, Double, or Mix.
! 8 : Teletext store
$ : : Exit from the Teletext display
% 1 : Teletext sub page
^ 6 : Teletext index
* 9 : Teletext hold
) 7 : Teletext cancel
a 0 : Teletext mode selection
(LIST / FLOF)
b 2 : Teletext next page
3 : Teletext previous page
N
¦
N
AD
1
2
3
4
9
5
6
7
8
0
!
@
$
#
%
^
&
*
)
b
c
d
e
g
f
a
(
[8000_Aus]BN68-02227A-02Eng.indb6 6 2009-08-20 ¿ÀÈÄ 5:12:07

English - 7
Pairing the Remote Control
A process that enables two-way communication between the TV and the remote control when their MAC addresses match after the
TV saved the MAC address of the remote control and vice versa.
Auto Pairing
An automatic pairing method that completes the pairing of the TV and the remote control
internally without user intervention when a user operates the remote control after purchasing a
TV with a RF remote control.
If Auto Pairing does not work, refer to the ‘Manual Pairing’.
When the TV is turned off (Standby mode)
1. Press the POWER
P button on the RF remote control.
The remote control enters pairing mode.
2. The TV that receives the Power command is turned on.
The TV enters pairing mode. Pairing mode is maintained until pairing is complete.
3. Pairing mode is completed.
A buzzer goes off.
When the TV is turned on
1. Press any key on the RF remote control.
The remote control enters pairing mode.
After paring is complete, the key pressed by the user transmits the corresponding
command to the TV.
The time taken to complete the pairing and to send the command is less than 1
second.
2. The TV is already in pairing mode.
A TV, the paring of which is not completed, remains in pairing mode while the TV is
turned on.
3. Pairing mode is completed.
A buzzer goes off.
Manual Pairing
You can pair the TV and the remote control so that the remote control only controls the TV.
1. Plug the TV power plug into the power outlet.
Turn the TV power switch off.
2. Press the PAIRING button on the remote control.
Use a sharp object to press the button.
Keep a distance of less than 3 feet (1 m) between the TV and the remote control.
3. Press the POWER
P
button on the front panel of the TV. The TV is turned on and Pairing with the remote control is
automatically completed.
4. Press the remote control buttons to check if the remote control is properly paired.
If the remote control does not work, attempt the pairing process again.
If the remote control does not work even after the above measures have been taken, press the RESET button, and
replace the batteries.
Finding the Remote Control
1. Press the Volume (-) button on the front panel of the TV and hold it down for 10 seconds.
The TV will transmit a signal to nd the remote control.
2. The remote control will generate an alarm sound for 30 seconds. Search for the remote
control from the location where the sound is heard the loudest.
If no sound is heard, please try again.
3. If the remote control has been found, press any remote control button to stop the sound.
¦
❑
N

N
N
N

N
N
N
N
N
❑
N
N
N
N
N
¦
N
AD
[8000_Aus]BN68-02227A-02Eng.indb7 7 2009-08-20 ¿ÀÈÄ 5:12:09

English - 8
Mini Remote Control
The Mini Remote Control is a simplified remote control that consists of the
power, channel and volume buttons only.
1Power On/Off button
2 < : Next channel / > : Previous channel
3+ : Volume increase / – : Volume decrease
4IrDA transmitter
Use the Mini Remote Control so that this part faces the TV.
Installing Batteries in the Remote Control
Normal Remote Control
1. Lift the cover at the back of the remote control upward as shown in the gure.
2. Install two AAA size batteries.
Make sure to match the ‘+’ and ‘–’ ends of the batteries with the diagram inside
the compartment.
3. Replace the cover.
Remove the batteries and store them in a cool, dry place if you won’t be using the
remote control for a long time. (Assuming typical TV usage, the batteries should
last for about one year.)
Mini Remote Control
1. Turn the battery cover counterclockwise to unlock it and then separate the
battery cover.
2. Insert the corresponding 3V Lithium battery.
3. Place the battery cover into the remote control aligning it with the grooves
and then turn the battery cover clockwise to lock the cover.
If the remote control doesn’t work, check the following:
Is the TV power on?
Are the plus and minus ends of the batteries reversed?
Are the batteries drained?
Is there a power outage or is the power cord unplugged?
Is there a special fluorescent light or neon sign nearby?
¦
N
¦
N
N
N





1
4
2
3
2
3
OPEN
CLOSE
[8000_Aus]BN68-02227A-02Eng.indb8 8 2009-08-20 ¿ÀÈÄ 5:12:11

English - 9
OPERATION
Viewing the menus
Before using the TV, follow the steps below to learn how to navigate the menu in order to select and adjust different functions.
Operation the OSD (On Screen Display)
The access step may differ depending on the selected menu.
1. Press the MENU button.
2. The main menu appears on the screen. The menu’s left side has icons : Picture, Sound,
Channel, Setup, Input, Application, Support.
3. Press the ▲ or ▼ button to select one of the icons.
To move to a lower menu, turn the wheel clockwise when the menu is displayed.
To move to a higher menu, turn the wheel counterclockwise.
4. Then press the ENTER E button to access the icon’s sub-menu.
5. Press the ▲ or ▼ button to select the icon’s submenu.
6. Press the ◄ or ► button to decrease or increase the value of a particular item. The
adjustment OSD may differ depending on the selected menu.
7. Press the ENTER
E button to complete the conguration. Press the EXIT button to exit.
¦
❑
N
AD
MENU Button
Display the main on-screen menu.
ENTER E / WHEEL Buttons
Move the cursor and select an
item. Select the currently selected
item. Confirm the setting.
RETURN Button
Return to the previous menu.
EXIT
Exit the on-screen menu.
AD
AD
AD
Mode :Standard ▶
Backlight :5
Contrast :95
Brightness :45
Sharpness :50
Colour :50
Tint(G/R) :G50/R50
AdvancedSettings
Picture
Mode :Standard
Backlight :5 ▶
Contrast :95
Brightness :45
Sharpness :50
Colour :50
Tint(G/R) :G50/R50
AdvancedSettings
PictureOptions
Picture
5
U Move L Adjust E Enter R Return
▲
Backlight
▼
Help icon
[8000_Aus]BN68-02227A-02Eng.indb9 9 2009-08-20 ¿ÀÈÄ 5:12:12

English - 10
Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and subsequently.
1. Press the POWER button on the remote control.
The Plug & Play starting message is displayed. Press the ENTER
E button.
The factory default setting for the picture will be Standard.
Standard mode is the recommended home viewing picture mode.
If the remote control is not functioning properly, please follow the instructions to repeat
the process for pairing the remote control to the TV
2. The message Select ‘Home Use’ when installing this TV in your home. is displayed.
3. Press the ◄ or ► button to select Store Demo or Home Use, then the ENTER
E button.
We recommend setting the TV to Home Use mode for the best picture in your home
environment.
Store Demo mode is only intended for use in retail environments.
If the unit is accidentally set to Store Demo mode and you want to return to Home Use (Standard): Press the Volume
button on the TV. When the volume OSD is displayed, press and hold the MENU button on the TV for 5 seconds.
4. Press the ENTER
E button. Select the appropriate country by pressing the ▲ or ▼ button. Press the ENTER E button to
conrm your choice.
5. Press the ▲ or ▼ button to select the channel source to memorize. Press the ENTER
E button to select Start.
Digital & Analogue: Digital and Analogue channels.
Digital: Digital channels.
Analogue: Analogue channels.
The channel search will start and end automatically.
Press the ENTER
E button at any time to interrupt the memorization process.
After all the available channels are stored, the message Set the Clock Mode. is displayed.
6. Press the ENTER
E button. Press the ▲ or ▼ button to select Auto, then Press the ENTER E button.
If you select Manual, Set current date and time is displayed.
If you have received a digital signal, the time will be set automatically. If not, select Manual to set the clock.
7. Press the ▲ or ▼ button to highlight the time zone for your local area. Press the ENTER
E button. (Australia only)
8. The description for the connection method providing the best HD screen quality is displayed. Check the description and press
the ENTER
E button.
9. Press the ◄ or ► button to select See Product Guide or Watch TV, then the ENTER
E button.
See Product Guide: You are moved to the Product Guide where you can view the introduction to the main functions of
your new HDTV.
Watch TV: You can watch the set broadcasting channel.
If you want to return to this feature...
1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER
E button.
2. Press the ENTER
E button again to select Plug & Play.
3. Enter your 4 digit PIN number. The default PIN number of a new TV set is ‘0-0-0-0’.
If you want to change PIN number, use the Change PIN function. (refer to page 23)
The Plug & Play feature is only available in the TV mode.
Any previous settings and adjustments will remain including the picture mode.
All Channel settings will be lost.
For home viewing, ensure the picture mode is set to Standard.
¦
N
N
N
N
N
N
N
●
●
●
N
N
N
N
N
●
●
N
N
N
N
N
CHANNEL CONTROL
Conguring the Channel Menu
Country (depending on the country)
You can change the country.
The PIN number input screen appears. Enter your 4 digit PIN number.
The default PIN number of a new TV set is 0-0-0-0. You can change the PIN by selecting
Change PIN from the menu.
Some functions may not be supported depending on the selected country.
¦
❑
N
N
N
Plug & Play
AD
Country : Australia ►
Auto Store
Manual Store
Full Guide
Mini Guide
Default Guide : Full Guide
Channel List
Channel Mode : Added Ch.
Channel
Plug & Play
E Enter
The Menu Language, Store Demo, Channels, and Time
will be set. If the remote control is not functioning
properly, please follow the instructions to repeat the
process for pairing the remote control with the TV.
Start
BN68-02227A-02Eng.indd 10 2009-09-16 ¿ÀÈÄ 2:57:49

English - 11
Auto Store
You can scan for the frequency ranges available to you (and availability depends on your country).
Automatically allocated programme numbers may not correspond to actual or desired programme numbers.
If a channel is locked using the Child Lock function, the PIN input window appears.
Air / Cable
Antenna source to memorize
Digital & Analogue: Digital and Analogue channels.
Digital: Digital channels.
Analogue: Analogue channels.
Scans for all channels with active broadcast stations and stores them in the TV’s memory.
If you want to stop Auto Store, press the ENTER E button.
The Stop Auto Store? message will be displayed.
Select Yes by pressing the ◄ or ► button, then press the ENTER E button.
Manual Store
Scans for a channel manually and stores it in the TV’s memory.
If a channel is locked using the Child Lock function, the PIN input window appears.
Digital Channel
Manual store for digital channels.
Digital Channel is only available in digital TV mode.
Channel: Set the Channel number using the ▲, ▼ or number (0~9) buttons.
Frequency: Set the frequency using the number buttons.
Bandwidth: Set the bandwidth using the ▲, ▼ or number (0~9) buttons.
When it has nished, channels are updated in the channel list.
Analogue Channel
Manual store for analogue channel.
Programme (Programme number to be assigned to a channel): Sets the programme number using the ▲, ▼ or number (0~9)
buttons.
Colour System → Auto / PAL / SECAM / NTSC4.43: Sets the colour system value using the ▲ or ▼ button.
Sound System → BG / DK / I / L: Sets the sound system value using the ▲ or ▼ button.
Channel (When you know the number of the channel to be stored): Press the ▲ or ▼ button to select C(Air channel) or S
(Cable channel). Press the ► button, then press the ▲, ▼ or number (0~9) buttons to select the required number.
You can also select the channel number directly by pressing the number (0~9) buttons.
If there is abnormal sound or no sound, reselect the sound standard required.
Search (When you do not know the channel numbers): Press the ▲ or ▼ button to start the search. The tuner scans the
frequency range until the rst channel or the channel that you selected is received on the screen.
Store (When you store the channel and associated programme number): Set to OK by pressing the ENTER E button.
Channel mode
P (Programme mode): When completing tuning, the broadcasting stations in your area have been assigned to position
numbers from P00 to P99. You can select a channel by entering the position number in this mode.
C (Air channel mode): You can select a channel by entering the assigned number to each air broadcasting station in this mode.
S (Cable channel mode): You can select a channel by entering the assigned number for each cable channel in this mode.
Full Guide / Mini Guide
The EPG (Electronic Programme Guide) information is provided by the broadcasters. Programme entries may appear blank or out
of date as a result of the information broadcast on a given channel. The display will dynamically update as soon as new information
becomes available.
You can also display the guide menu simply by pressing the GUIDE button. (To congure the Default Guide, refer to the
descriptions.)
In New Zealand, if Digital Text is set to Enable, the EPG (Electronic Program Guide) will work. (refer to page 24)
Full Guide
Displays the programme information as time ordered One hour segments. Two hours of programme information is displayed which
may be scrolled forwards or backwards in time.
Mini Guide
The information of each programme is displayed by each line on the current channel Mini Guide screen from the current
programme onwards according to the programme starting time order.
❑
N

●
●
●
N
N
❑
N
N

N
●
●
●
N

●
●
●
●
N
N
●
●
N
–
–
–
❑
O
N


[8000_Aus]BN68-02227A-02Eng.indb11 11 2009-08-20 ¿ÀÈÄ 5:12:12

English - 12
Default Guide → Full Guide / Mini Guide (Australia & Singapore Only)
You can decide whether to display either the Full Guide or the Mini Guide when the GUIDE button on the remote control is
pressed.
Channel List
For the detailed procedures on using the Channel List, refer to page 13.
You can select these options by simply pressing the CH LIST button on the remote control.
Channel Mode
When press the P > / < button, Channels will be switched within the selected channel list.
Added Ch.
Channels will be switched within the memorized channel list.
Favourite Ch.
Channels will be switched within the favourite channel list.
Fine Tune
If the reception is clear, you do not have to ne tune the channel, as this is done automatically during the search and store
operation. If the signal is weak or distorted, you may have to ne tune the channel manually.
Fine tuned channels that have been saved are marked with an asterisk “*” on the right-hand side of the channel number in the
channel banner.
To reset the ne-tuning, select Reset by pressing the ▲ or ▼ button and then press the ENTER E button.
Only Analogue TV channels can be ne tuned.
Using the Full / Mini Guide
Full Guide
DTV Cable 900 f tn Tue, 1 Jun 2:10 am
Freshmen On Campus
2:00 - 2:30
No Detailed Information
Today 2:00 - 3:00 3:00 - 4:00
Mint Extra
Loaded
Fresh 40 with Dynamite MC
The Distillery
Smash Hits! Sunday
900 f tn
901 ITV Play
902 Kerrang!
903 Kiss
903 oneword
903 Smash Hits!
▼
Street Hypn..
Kisstory
No Information
No Information
No Information
Freshmen O..
Watch Information Page ■ Mini Guide ■ +24 Hours ■ Exit
Mini Guide DTV Cable 900 f tn
Street Hypnosis
Booze Britain
2:00
2:30
5:00
▼
Freshmen On Campus
Watch Information Page ■ Full Guide ■ Exit
To... Then...
Watch a programme in the EPG list Select a programme by pressing the ▲, ▼, ◄, ► button.
Exit the guide Press the blue button
If the next programme is selected, it is scheduled with the clock icon displayed. If the ENTER E button is pressed again, press
the ◄, ► button to select Cancel Schedules, the scheduling is canceled with the clock icon gone.
View programme information Select a programme of your choice by pressing the ▲, ▼, ◄, ► button.
Then press the INFO button when the programme of your choice is
highlighted.
The programme title is on the upper part of the screen center.
Please click on INFO button for the detailed information. Channel Number, Running Time, Status Bar, Parental Level, Video
Quality Information (HD / SD), Sound Modes, Subtitle or Teletext, languages of Subtitle or Teletext and brief summary of the
highlighted programme are included on the detailed information. “...” will be appeared if the summary is long.
Toggle between the Mini Guide or Full Guide Press the red button repeatedly.
In Full Guide
Scrolls backwards quickly (24 hours).
Scrolls forwards quickly (24 hours).
Press the green button repeatedly.
Press the yellow button repeatedly.
❑
❑
O
❑


❑
N
N
N
[8000_Aus]BN68-02227A-02Eng.indb12 12 2009-08-20 ¿ÀÈÄ 5:12:13

English - 13
Managing Channels
Using this menu, you can add / delete or set favourite channels and use the programme guide for digital broadcasts.
All Channels
Shows all currently available channels.
Added Channels
Shows all added channels.
Favourites
Shows all favourite channels.
To select the favourites channels you have set up, press the FAV.CH button on the remote
control.
Programmed
Shows all current reserved programmes.
Select a channel in the All Channels, Added Channels or Favourites screen by pressing the ▲ / ▼ buttons, and pressing
the ENTER E button. Then you can watch the selected channel.
Using the Colour buttons with the Channel List
Red (Channel Type): Toggle between your TV, Radio, Data / Other and All.
Green (Zoom): Enlarges or shrinks a channel number.
Yellow (Select): Selects multiple channel lists. You can perform the Add / Delete, Add to Favourite / Delete from
Favourite or Lock / Unlock function for multiple channels at the same time. Select the required channels and press the
yellow button to set all the selected channels at the same time.
TOOLS (Tools): Displays the Delete (or Add), Add to Favourite (or Delete from Favourite), Lock (or Unlock), Timer
Viewing, Edit Channel Name, Edit Channel Number, Sort, Select All (or Deselect All) or Auto Store menu. (The
Options menus may differ depending on the situation.)
Channel Status Display Icons
A : An Analogue channel.
c : A channel selected by pressing the yellow button.
* : A channel set as a Favourite.
( : A programme currently being broadcast.
\ : A locked channel.
) : A reserved programme
Channel List Option Menu (in All Channels / Added Channels / Favourites)
Press the TOOLS button to use the option menu.
Option menu items may differ depending on the channel status.
Add / Delete
You can delete or add a channel to display the channels you want.
All deleted channels will be shown on All Channels menu.
A gray-coloured channel indicates the channel has been deleted.
The Add menu only appears for deleted channels.
You can also delete a channel to the Added Channels or Favourites menu in the same
manner.
Add to Favourite / Delete from Favourite
You can set channels you watch frequently as favourites.
The ♥ symbol will be displayed and the channel will be set as a favourite.
All favourite channels will be shown on Favourite menu.
Press the TOOLS button to display the Tools menu. You can also set the Add to Favourite by selecting Tools → Add to
Favourite.
Lock / Unlock
You can lock a channel so that the channel cannot be selected and viewed. This function is available only when the Child Lock is
set to On. (see page 23)
The PIN number input screen appears. Enter your 4 digit PIN number.
The default PIN number of a new TV set is 0-0-0-0. You can change the PIN, by selecting Change PIN from the menu.
The \ symbol will be displayed and the channel will be locked.
¦



O

N
N
–
–
–
–
N●
●
●
●
●
●
N
N

N
N
N
N

N
N
T

N
N
N
A
1 C --
A
2 C --
A
3 C --
A
4 C --
A
5 ♥ C --
A
6 C --
A
7 C --
A
8 C --
A
9 C --
A
10 C --
Added Channels
All Channel Type Zoom Select Page T Tools
A
1 C --
A
2 C --
A
3 C --
A
4 C --
A
5 ♥ C --
A
6 C --
A
7 C --
A
8 C --
A
9 C --
A
10 C --
All Channels
All Channel Type Zoom Select Page T Tools
Delete
Add to Favourite
Lock
Timer Viewing
Edit Channel Name
Sort
▼
[8000_Aus]BN68-02227A-02Eng.indb13 13 2009-08-20 ¿ÀÈÄ 5:12:13

English - 14
Timer Viewing
If you reserve a programme you want to watch, the channel is automatically switched to the reserved channel in the Channel List;
even when you are watching another channel. To reserve a programme, set the current time rst. (See page 22)
Only memorized channels can be reserved.
You can set the channel, day, month, year, hour and minute directly by pressing the number buttons on the remote control.
Reserving a programme will be shown on Programmed menu.
Digital Programme Guide and Viewing Reservation
When a digital channel is selected, and you press the ► button, the Programme Guide for the channel appears. You can
reserve a programme according to the procedures described above.
Edit Channel Name (analogue channels only)
Channels can be labeled so that their call letters appear whenever the channel is selected.
The names of digital broadcasting channels are automatically assigned and cannot be labeled.
Edit Channel Number (digital channels only) (Australia, Singapore only)
You can also edit the channel number by pressing the number buttons on the remote control.
Sort (analogue channels only)
This operation allows you to change the programme numbers of the stored channels. This operation may be necessary after using
the auto store.
Select All / Deselect All
Select All: You can select all the channels in the channel list.
Deselect All: You can deselect all the selected channels by pressing the yellow button.
You can perform the add / delete, add to Favourites / delete from Favourites, or lock / unlock function for multiple channels at
the same time. Select the required channels and press the yellow button to set all the selected channels at the same time.
The c mark appears to the left of the selected channels.
You can only select Deselect All when there is a selected channel.
Auto Store
For further details on setting up options, refer to page 11.
If a channel is locked using the Child Lock function, the PIN input window appears.
Channel List Option Menu (in Programmed)
You can view, modify or delete a reservation.
Press the TOOLS button to use the option menu.
Change Info
Select to change a viewing reservation.
Cancel Schedules
Select to cancel a viewing reservation.
Information
Select to view a viewing reservation. (You can also change the reservation information.)
Select All
Select all reserved programmes.

N
N
N
N

N

N


●
●
N
N
N

N
N
N




1 / 1 / 2009
01:59 pm 5 )
2 / 1 / 2009
06:59 pm 2 ) The Equalizer
08:59 pm 2 ) McMillan & Wife
07:59 am 2 ) M.Spillane’s mike
Programmed
All Zoom Select T Tools E Information
Change Info
Cancel Schedules
Information
Select All
[8000_Aus]BN68-02227A-02Eng.indb14 14 2009-08-20 ¿ÀÈÄ 5:12:14

English - 15
PICTURE CONTROL
Conguring the Picture Menu
Mode
You can select the type of picture which best corresponds to your viewing requirements.
Press the TOOLS button to display the Tools menu. You can also set the size by selecting
Tools → Picture Mode.
Dynamic
Selects the picture for increased denition in a bright room.
Standard
Selects the picture for the optimum display in a normal environment.
Natural
Selects the picture for optimum and eye-comfortable display.
This function is not available in PC mode.
Movie
Selects the picture for viewing movies in a dark room.
Backlight / Contrast / Brightness / Sharpness / Colour / Tint(G/R)
Your television has several setting options that allow you to control the picture quality.
Backlight
Adjusts the brightness of LED back light.
Contrast
Adjusts the contrast level of the picture.
Brightness
Adjusts the brightness level of the picture
Sharpness
Adjusts the edge denition of the picture.
Colour
Adjusts colour saturation of the picture.
Tint(G/R)
Adjusts the colour tint of the picture.
Select a picture mode to be adjusted rst. The adjusted values are saved for each picture mode.
When you make changes to Backlight, Contrast, Brightness, Sharpness, Colour or Tint(G/R), the OSD will be adjusted
accordingly.
In analogue TV, AV modes of the PAL system, you cannot use the Tint(G/R) Function.
In PC mode, you can only make changes to Backlight, Contrast and Brightness.
Settings can be adjusted and stored for each external device you have connected to an input of the TV.
The energy consumed during use can be signicantly reduced if the brightness level of the picture is lowered, which will
reduce the overall running cost.
Advanced Settings
Samsung’s new TVs allow you to make even more precise picture settings than previous
models.
Advanced Settings is available in Standard or Movie mode.
In PC mode, you can only make changes to Dynamic Contrast, Gamma and White
Balance from among the Advanced Settings items.
Black Tone → Off / Dark / Darker / Darkest
You can select the black level on the screen to adjust the screen depth.
Dynamic Contrast → Off / Low / Medium / High
You can adjust the screen contrast so that the optimal contrast is provided.
Gamma
You can adjust the Primary Colour (Red, Green, Blue) Intensity.
¦
❑
T



N

❑






N
N
N
N
N
N
❑
N
N



Mode : Standard ►
Backlight : 5
Contrast : 95
Brightness : 45
Sharpness : 50
Colour : 50
Tint (G/R) : G50/R50
Advanced Settings
Picture
Colour : 50
Tint (G/R) : G50/R50
Advanced Settings ►
Picture Options
Picture Reset
Picture
[8000_Aus]BN68-02227A-02Eng.indb15 15 2009-08-20 ¿ÀÈÄ 5:12:14

English - 16
Colour Space
Colour Space is a colour matrix composed of red, green and blue colours. Select your favourite Colour Space to experience the
most natural colour.
Auto: Auto Colour Space automatically adjusts to the most natural colour tone based on programme sources.
Native: Native Colour Space offers deep and rich colour tone.
Custom: Adjusts the colour range to suit your preference.
Customizing the Colour Space
Colour → Red / Green / Blue / Yellow / Cyan / Magenta
Adjusts the Colour range to suit your preference. Colour is available when Colour Space is set to Custom.
Red / Green / Blue: In Colour, you can adjust the RGB values for the selected colour.
Reset: Resets the colour space to the default values.
White Balance
You can adjust the colour temperature for more natural picture colours.
R-Offset / G-Offset / B-Offset / R-Gain / G-Gain / B-Gain: You can adjust the Colour ‘temperature’ in the light areas by
changing the values of R, G, B, Recommended for advanced users only.
Reset: The previously adjusted white balance will be reset to the factory defaults.
Flesh Tone
You can emphasize the pink ‘esh tone’ in the picture.
Changing the adjustment value will refresh the adjusted screen.
Edge Enhancement → Off / On
You can emphasize object boundaries in the picture.
xvYCC → Off / On
Setting the xvYCC mode to on increases detail and colour space when watching movies from an external device (ie. DVD player)
connected to the HDMI or Component IN jacks.
xvYCC is available when the picture mode is set to Movie, and the external input is set to HDMI or Component mode.
This function may not be supported depending on your external device.
Picture Options
In PC mode, you can only make changes to the Colour Tone and Size from among the items in Picture Options.
Colour Tone → Cool / Normal / Warm1 / Warm2 / Warm3
You can select the most comfortable colour tone to your eyes.
Settings can be adjusted and stored for each external device you have connected to an input of the TV.
Warm1, Warm2 or Warm3 is only activated when the picture mode is Movie.
Size
You can select the picture size which best corresponds to your viewing requirements.
Press the TOOLS button to display the Tools menu. You can also set the size by selecting Tools → Picture Size.
Auto Wide: Automatically adjusts the picture size to the 16:9 aspect ratio. (New Zealand, Singapore only)
16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.
Wide Zoom: Magnify the size of the picture more than 4:3.
Zoom: Magnies the 16:9 wide picture (in the vertical direction) to t the screen size.
4:3: This is the default setting for a video movie or normal broadcasting.
Screen Fit: Use the function to see the full image without any cutoff when HDMI (720p / 1080i / 1080p) or Component (1080i
/ 1080p) signals are input.
Depending on the input source, the picture size options may vary.
The items available may differ depending on the selected mode.
In PC Mode, only 16:9 and 4:3 mode can be adjusted.
Settings can be adjusted and stored for each external device you have connected to an input of the TV.
Temporary image retention may occur when viewing a static image on the set for more than two hours.
Wide Zoom: Press the ► button to Select Position, then press the ENTER E button. Press the ▲ or ▼ button to move the
screen up / down. Then press the ENTER E button.
Zoom: Press the ► button to Select Position, then press the ENTER E button. Press the ▲ or ▼ button to move the picture
up and down. Then press the ENTER E button. Press the ► button to Select Size, then press the ENTER E button. Press
the ▲ or ▼ button to magnify or reduce the picture size in the vertical direction. Then press the ENTER E button.
After selecting Screen Fit in HDMI (1080i / 1080p) or Component (1080i / 1080p) mode: Select Position by pressing the ◄ or
► button. Use the ▲, ▼, ◄ or ► button to move the picture.
Reset: Press the ◄ or ► button to select Reset, then press the ENTER E button. You can initialize the setting.
If you use the Screen Fit function with HDMI 720p input, 1 line will be cut at the top, bottom, left and right as in the overscan
function.

●
●
●
N
–
–
–
–

●
●

N


N
N
❑
N

N
N

T
●
●
●
●
●
●
N
N
N
N
N
N
N
N
N
[8000_Aus]BN68-02227A-02Eng.indb16 16 2009-08-20 ¿ÀÈÄ 5:12:14

English - 17
Screen Mode → 16:9 / Wide Zoom / Zoom / 4:3 (New Zealand, Singapore only)
When setting the picture size to Auto Wide in a 16:9 wide TV, you can determine the picture size you want to see the 4:3 WSS
(Wide Screen Service) image or nothing. Each individual European country requires different picture size so this function is
intended for users to select it.
16:9: Sets the picture to 16:9 wide mode.
Wide Zoom: Magnify the size of the picture more than 4:3.
Zoom: Magnify the size of the picture vertically on screen.
4:3: Sets the picture to 4:3 normal mode.
This function is available in Auto Wide mode.
This function is not available in PC, Component or HDMI mode.
Digital NR → Off / Low / Medium / High / Auto
If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static
and ghosting that may appear on the screen.
When the signal is weak, select one of the other options until the best picture is displayed.
HDMI Black Level → Normal / Low
You can directly select the black level on the screen to adjust the screen depth.
This function is active only when the external input connects to HDMI (RGB signals).
Film Mode → Off / Auto 1 / Auto 2
The TV can be set to automatically sense and process lm signals from all sources and adjust the picture for optimum quality.
Film Mode is supported in TV, AV, COMPONENT(480i / 1080i) and HDMI(480i / 1080i).
200Hz Motion Plus → Off / Clear / Standard / Smooth / Custom / Demo
Removes drag from fast scenes with a lot of movement to provide a clearer picture.
This function is not available in PC mode.
If you enable 200Hz Motion Plus, noise may appear on the screen. If this occurs, set 200Hz Motion Plus to off or select one of
the other options.
Off: Switches 200Hz Motion Plus off.
Clear: Sets 200Hz Motion Plus to minimum.
Standard: Sets 200Hz Motion Plus to medium.
Smooth: Sets 200Hz Motion Plus to maximum.
Custom: Adjusts the blur and judder reduction level to suit your preference.
Blur Reduction: Adjusts the blur reduction level in video sources.
Judder Reduction: Adjusts the judder reduction level in video sources with lm signals.
Reset: Reset the custom settings.
Demo: Displays the difference between 200Hz Motion Plus on and off modes.
Blue Only Mode → Off / On
This function is for AV device measurement experts. This function displays the blue signal only by removing the red and green
signals from the video signal so as to provide a Blue Filter effect that is used to adjust the Colour and Tint of video equipment such
as DVD players, Home Theatres, etc. Using this function, you can adjust the Colour and Tint to preferred values appropriate to
the signal level of each video device using the Red / Green / Blue / Cyan / Magenta / Yellow Colour Bar Patterns, without using an
additional Blue Filter.
Blue Only Mode is available when the picture mode is set to Movie or Standard.
Picture Reset → Reset Picture Mode / Cancel
Resets all picture settings to the default values.
Reset Picture Mode: Current picture values return to default settings.

●
●
●
●
N
N

N

N

N

N
●
●
●
●
●
–
–
–
●

N
❑
N
[8000_Aus]BN68-02227A-02Eng.indb17 17 2009-08-20 ¿ÀÈÄ 5:12:14

English - 18
Viewing Picture-in-Picture
You can display a sub picture within the main picture of set programme or video input. In this
way, you can watch the picture of set programme or video input from any connected equipment
while watching the main picture.
Press the TOOLS button to display the Tools menu. You can also congure PIP related
settings by selecting Tools → PIP.
You may notice that the picture in the PIP window becomes slightly unnatural when you
use the main screen to view a game or karaoke.
PIP
Main picture Sub picture
Component
HDMI1/DVI, HDMI2, HDMI3, HDMI 4
PC
TV, AV
PIP → Off / On
You can activate or deactivate the PIP function.
Source
You can select a source of the sub-picture.
You can only set Source by selecting Tools → PIP → Source.
Size → Õ / à / À / Œ
You can select a size of the sub-picture.
Position → à / – / — / œ
You can select a position of the sub-picture.
In Double ( Œ , À ) mode, Position cannot be selected.
Channel
You can select the channel for the sub-screen.
Channel is available when the Source is set to TV.
Sound Select → Main / Sub
You can listen to the sound of the sub (PIP) picture.
Press the TOOLS button to display the Tools menu. You can also set the sound of the sub picture by selecting Tools → PIP →
Sound Select.
Main: Used to listen to the sound of the main picture.
Sub: Used to listen to the sound of the sub picture.
Using Your TV as a Computer (PC) Display
Setting Up Your PC Software (Based on Windows XP)
The Windows display-settings for a typical computer are shown below. The actual screens
on your PC will probably be different, depending upon your particular version of Windows
and your particular video card. However, even if your actual screens look different, the
same basic set-up information will apply in almost all cases. (If not, contact your computer
manufacturer or Samsung Dealer.)
1. First, click on ‘Control Panel’ on the Windows start menu.
2. When the control panel window appears, click on ‘Appearance and Themes’ and a
display dialog-box will appear.
3. When the control panel window appears, click on ‘Display’ and a display dialogbox will
appear.
4. Navigate to the ‘Settings’ tab on the display dialog-box.
The correct size setting (resolution): Optimum-1920 X 1080 pixels
If a vertical-frequency option exists on your display settings dialog box, the correct
value is ‘60’ or ‘60 Hz’. Otherwise, just click ‘OK’ and exit the dialog box.
¦
T
N
❑


T


N

N

●
●
¦
●
●
Melody : Medium
Energy Saving : Off
PIP ►
Setup
PIP
PIP ◄ On ►
Source : TV
Size : Õ
Position : Ã
Channel : ATV 1
Sound Select : Main
U Move L Adjust R Return
[8000_Aus]BN68-02227A-02Eng.indb18 18 2009-08-20 ¿ÀÈÄ 5:12:15