Samsung LS-15E23C User manual

LCD TV
LS15E23C
LS17E24C
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
ON-SCREEN MENUS
PC DISPLAY
PICTURE IN PICTURE (PIP)
TELETEXT

English-2
Caution
CAUTION: TO PREVENT ELECTRICAL SHOCK, DO NOT
REMOVE REAR COVER, NO USER SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
The lightning flash and arrow head
within the triangle is a warning
sign alerting you of “dangerous
voltage” inside the product.
The exclamation point within the
triangle is a warning sign alerting
you of important instructions
accompanying the product.
WARNING: TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
☛The main voltage is indicated on the rear of your set and the frequency is 50 or 60 Hz.
Information in this document is subject to change without notice.
© 2002 Samsung Electronics Co., Ltd. All rights reserved.
Reproduction in any manner whatsoever without the written permission of
Samsung Electronics Co., Ltd. is strictly forbidden.
Samsung Electronics Co., Ltd. shall not be liable for errors contained herein or
for incidental or consequential damages in connection with the furnishing,
performance, or use of this material.
The Samsung logo is the registered trademarks of Samsung Electronics Co., Ltd.;
VESA, DPMS and DDC are registered trademarks of Video Electronics Standard
Association; the E NERGY S TAR name and logo are registered trademarks of the
U.S. Environmental Protection Agency (EPA). As an E
NERGY S TAR Partner,
Samsung Electronics Co., Ltd. has determined that this product meets the
E NERGY S TAR guidelines for energy efficiency. All other product names
mentioned herein may be the trademarks or registered trademarks of their
respective owners.

English-3
Safety Instructions
5¡
10%
HH
35¡
75%
œDo NOT expose the TV to extreme
temperature conditions or to extreme
humidity conditions.
These illustrations represent precautions concerning your TV.
œDo NOT expose the TV to any
liquids.
œDuring a storm conditions (especially
when there is lightning) unplug the
TV from the mains socket and aerial.
œAlways keep the power adaptor in a
well-ventilated area.
œKeep the power adaptor away from
any other heater. Possible fire hazard.
Do NOT expose the TV to direct
sunlight.
√
If the TV is broken, do not try to
repair it yourself. Contact qualified
service personnel.
√
Keep all power adaptors apart.
Possible fire hazard.
√
Remove and discard the plastic
cover from the power adaptor before
use. Possible fire hazard.
√
If the remote control is not used for a
long period of time, remove the
batteries and store it in a cool, dry
place.
√
THIS DEVICE IS NOT FOR USE IN INDUSTRIAL ENVIRONMENTS

English-4
Contents (continued)
◆FOREWORD
■Caution .......................................................................................................... 2
■Safety Instructions .......................................................................................... 3
◆CONNECTING AND PREPARING YOUR TV/Monitor
■Viewing the Control Panel.............................................................................. 6
■Viewing the Connection Panel ....................................................................... 7
- Connecting an Aerial or Cable Television Network..................................... 8
- Connecting DVD, VCR, or DTV Set-Top Box.............................................. 8
- Connecting Computer................................................................................. 8
- Connecting External A/V Devices ............................................................... 9
- Kensington Slot ........................................................................................... 9
■Viewing Pictures From External Sources ......................................................... 9
■Attaching a Wall or Arm Mounting device ..................................................... 10
■Installing VESA Compliant Mounting device .................................................. 10
■Inserting the Batteries in the Remote Control.................................................. 11
■Viewing the Remote Control (All Functions Except Teletext)........................... 12
■Viewing the Remote Control (Teletext Functions) ........................................... 13
■Switching On and Off .................................................................................... 14
■Placing in Standby Mode ............................................................................... 14
■Becoming Familiar with the Remote Control.................................................. 15
◆SETTING THE CHANNELS
■Storing Channels Automatically...................................................................... 16
■Sorting the Stored Channels ........................................................................... 17
■Storing Channels Manually............................................................................. 18
■Giving Channels Names................................................................................. 20
■Skipping Unwanted Channels ........................................................................ 21
■Fine Tuning Channel Reception...................................................................... 21
◆USING THE VARIOUS FUNCTIONS (continued)
■Changing the Picture Standard ....................................................................... 22
■Adjusting the Picture Settings ......................................................................... 22
■Selecting the Picture Format........................................................................... 23
■Freezing the Current Picture........................................................................... 23

English-5
Contents
◆USING THE VARIOUS FUNCTIONS
■Changing the Sound Standard ........................................................................ 24
■Adjusting the Sound Settings .......................................................................... 24
■Enjoying the Dolby Sound.............................................................................. 25
■Selecting the Sound Mode.............................................................................. 25
■Viewing the Picture In Picture (PIP) ................................................................ 26
■Switching Off Automatically........................................................................... 27
■Displaying Information................................................................................... 27
◆USING THE PC FUNCTIONS
■Setting up Your PC Softerware (Based on Windows 98).................................. 28
■Adjusting the Brightness and Contrast ............................................................ 29
■Adjusting the Image Quality........................................................................... 30
■Changing the Image Position.......................................................................... 31
■Adjusting the Color ........................................................................................ 32
■Initializing the Image Settings......................................................................... 33
◆USING THE TELETEXT FEATURE
■Teletext Feature .............................................................................................. 34
■Displaying the Teletext Information ................................................................ 35
■Selecting a Page by Number .......................................................................... 36
■Using FLOF to Select a Page .......................................................................... 37
■Storing Teletext Pages..................................................................................... 37
◆RECOMMENDATIONS FOR USE
■Troubleshooting: Before Contacting Service Personnel ................................... 38
■Power Saver ................................................................................................... 39
■Technical and Environmental Specifications................................................... 40
■Display Modes ............................................................................................... 41
■Maintenance of Your Telelvision..................................................................... 41
☛➢
Press Important Note
Symbols

English-6
Viewing the Control Panel
ŒPC
Selects PC source
´PIP
Activates PIP (Picture-In-Picture) directly in PC
mode.
ˇTV/VIDEO
Displays a menu of all of the available input
sources (TV/Video1/Video2/S-Video).
¨MUTE
Temporary sound switch off
ˆMENU
Opens the on-screen menu.
ØCH/ CH❷❷
Moves the selector up or down on the OSD.
Increases or decreases the channel number.
ØVOL➛➛/ ❿❿VOL
Moves the selector left or right on the OSD.
Increases or decreases the level of audio volume
and the values of the selected function.
∏EXIT
Exits from the on-screen menu.
”AUTO
Allows you experience the quality of displayed
picture. The values of fine, coarse and position are
adjusted automatically. (It works PC mode only.)
’POWER
Turns ON/OFF your set.
˝Power Indicator
ÔRemote Control Sensor
Speakers

English-7
Viewing the Connection Panel (continued)
☛Whenever you connect an audio or video system to your set,
ensure that all elements are switched off. Refer to the
documentation supplied with your equipment for detailed
connection instructions and associated safety precautions.
Power Input
Option

English-8
Viewing the Connection Panel (continued)
ŒConnecting an Aerial or Cable Television Network (depending on the model)
To view television channels correctly, a signal must be received by the set from one of the following sources:
- An outdoor aerial
- A cable television network
- A satellite network
´Connecting DVD, VCR or DTV Set-Top Box
- Connect the RCA Cable to “AUDIO(L)” and “AUDIO(R)” on the rear of your set and the other end to “Audio
Out” connector of the DVD, VCR, or DTV Set-Top Box.
- Connect the RCA Cable to “Y”, “Pb”, and “Pr” on the rear of your set and the other end to “Component Out”
connector of the DVD, VCR, or DTV Set-Top Box.
ˇConnecting Computer
- Connect the 15 Pin D-SUB connector to the PC video connector.
- Connect the stereo audio cable to ”Audio (ST)”on the rear of your set and the other end to “Audio Out”of
the sound card on your computer.
➣15 Pin D-SUB connector
Pin Separate H/V Composite H/V
1 Red (R) Red (R)
2 Green (G) Green (G)
3 Blue (B) Blue (B)
4 Grounding Grounding
5 Grounding (DDC return) Grounding (DDC return)
6 Grounding - Red (R) Grounding - Red (R)
7 Grounding - Green (G) Grounding - Green (G)
8 Grounding - Blue (B) Grounding - Blue (B)
9 No connection No connection
10 Grounding - Sync. / Self test Grounding - Sync. / Self test
11 Grounding Grounding
12 DDC - SDA (Date) DDC - SDA (Date)
13 Horizontal Sync. Horizontal/Vertical Sync.
14 Vertical Sync. Not used
15 DDC - SCL (Clock) DDC - SCL (Clock)

English-9
Viewing Pictures From External Sources
Once you have connected up your various audio and video systems,
you can view the different sources by selecting the appropriate input.
1Check that all the necessary connections have been made (refer to
pages 8 and 9 for further details).
2Switch your set on and if necessary, press the TV/VIDEO button
repeatedly. The input sources are displayed in the following order:
TV
- VIDEO - S-VIDEO - Component
SLEEP DUAL I/II LIST/FLOF CANCEL
P.SIZE PIP
ON
TTX/MIX AUTO
PRE-CH
EXITMUTE
TV/VIDEO
TV/VIDEO
PC
PC
DISPLA
DISPLA
YSTILL
STILL
P.STD
.STD
S.STD
S.STD
Power
LOCATE
-/--
SIZE
SUBPAGE
Viewing the Connection Panel (continued)
¨Connecting External A/V Devices
- Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD, or Camcorder.
- Connect RCA audio cables to “AUDIO (L)”and “AUDIO (R)”on the rear of your set and the other ends to
corresponding audio out connectors on the A/V device.
- Headphone may be connected to the headphone output (Ø) on the rear of your set. While the headphone is
connected, the sound from the built-in speakers will be disabled.
ˆKensington Slot
- This television has been designed to apply a burglarproof lock.
➢Retractable Stand
Tilt the screen until you feel comfortable.
The maximum tilt angle is 15 degree to the
backward direction. Please do not tilt the
television other than specified range.
Excessive force to tilt the television
other than specified range may give
permanent damage to the mechanical
part of the stand.
15

English-10
Attaching a Wall or Arm Mounting Device
This television supports VESA mounting standard for use with various VESA mounting devices. To install
any VESA mounting device, please follow the instructions given.
( A ) ( B )
1Lay the television face-down on a flat surface with a cushion or other soft materials to protect the screen.
2Remove all cable connected on the television.
3Remove the four screws and then remove the Stand from the television.
4Connect all cable you removed at step 2.
5Now you are ready to install Wall/Arm mounting device depending on your applications.
Installing VESA Compliant Mounting Device
Align the mounting interface pad with the holes in the rear cover mounting pad and secure it with the four
screws that came with the arm-type base, wall mount hanger or other bases.
Rear cover mounting pad
Mounting

English-11
Inserting the Batteries in the Remote Control
You must insert or replace the batteries in the remote control when
you:
◆ Purchase your set
◆ Find that the remote control is no longer operating
correctly
1Remove the cover on the rear of the remote control by pressing the
symbol downwards and then pulling firmly to remove it.
2Insert two R03, UM4, “AAA”1.5V or equivalent batteries taking care to
respect the polarities:
◆ + on the battery against + on the remote control
◆ - on the battery against - on the remote control
3Replace the cover by aligning it with the base of the remote control
and pressing it back into place.
➣Do not mix battery types, i.e. alkaline and manganese.

English-12
Viewing the Remote Control (All Functions ExceptTeletext)
SLEEP
SLEEP
DUAL
DUAL
I/II LIST/FLOF
LIST/FLOF
CANCEL
CANCEL
P.SIZE PIP
PIP
ON
ON
TTX/MIX
TTX/MIX
AUT
AUT
O
PRE-CH
PRE-CH
EXIT
EXIT
MUTE
MUTE
TV/VIDEO
TV/VIDEO
PC DISPLA
DISPLA
YSTILL
STILL
P.STD S.STD
Power
Power
MENU
1 2 3
4 5 6
7 8 9
0
LOCA
LOCA
TE
-/--
P
P
SIZE
SUBP
SUBP
AGE
AGE
Numeric buttons for
direct channel access
Sound mode selection
Picture freeze
Picture size selection
Automatic switch-off
Television On/Off
Available sources selection
One/Two-digit channel selection
Previous channel
Exit from the OSD/
Picture-In-Picture Off
Temporary sound switch-off
Picture effect selection Sound effect selection
Picture-In-Picture On/
PIP source selection
Self-adjust to the incoming
video signal
Volume decrease
Next channel
Volume increase
➣The performance of the remote control may be affected by bright light.
Display the setting information
Select to the PC mode directly
Menu display and
change confirmation
Previous channel
PIP size selection
PIP location selection

English-13
Viewing the Remote Control (Teletext Functions)
SLEEP
SLEEP
DUAL
DUAL
I/II LIST/FLOF
LIST/FLOF
CANCEL
CANCEL
P.SIZE PIP
PIP
ON
ON
TTX/MIX
TTX/MIX
AUT
AUT
O
PRE-CH
PRE-CH
EXIT
EXIT
MUTE
MUTE
TV/VIDEO
TV/VIDEO
PC DISPLA
DISPLA
YSTILL
STILL
P.STD S.STD
Power
Power
MENU
1 2 3
4 5 6
7 8 9
0
LOCA
LOCA
TE
-/--
P
P
SIZE
SUBP
SUBP
AGE
AGE
Teletext hold
Teletext reveal
Teletext display/
mix both teletext information
and the normal broadcast
Teletext store
Teletext previous page
Teletext mode selection
(List or Flof)
Teletext cancel
Teletext next page Programme selection by name
Teletext sub-page
Teletext size selection
Fastext topic selection
Exit from the Teletext display

English-14
Switching On and Off
The mains lead is attached to the rear of your set.
1Plug the mains lead into an appropriate socket.
Result:
A Standby indicator lights off on the front panel.
2Press the Power ( ) button to switch on.
3To switch off, press the Power ( ) button again.
SLEEP DUAL I/II LIST/FLOF CANCEL
P.SIZE PIP
ON
TTX/MIX AUTO
PRE-CH
EXITMUTE
TV/VIDEO PC DISPLAY STILL
P.STD S.STD
Power
LOCATE
-/--
SIZE
SUBPAGE
SLEEP DUAL I/II LIST/FLOF CANCEL
P.SIZE PIP
ON
TTX/MIX AUTO
PRE-CH
EXITMUTE
TV/VIDEO PC DISPLAY STILL
P.STD S.STD
Power
LOCATE
-/--
SIZE
SUBPAGE
Placing in Standby Mode
Your set can be placed in Standby mode, in order to reduce the power
consumption.
The Standby mode can be useful when you wish to interrupt viewing
temporarily (during a meal, for example).
1Press the Power ( ) button.
2To switch back on, simply press the Power ( ) button again or a
numeric button.
➣Do not leave your set in Standby mode for long periods of
time (when you are away on holiday, for example). Turn off
by pressing the ( ) button. It is best to unplug the set from
the mains and aerial.
SLEEP DUAL I/II LIST/FLOF CANCEL
P.SIZE PIP
ON
TTX/MIX AUTO
PRE-CH
EXITMUTE
TV/VIDEO PC DISPLAY STILL
P.STD S.STD
Power
LOCATE
-/--
SIZE
SUBPAGE
SLEEP DUAL I/II LIST/FLOF CANCEL
P.SIZE PIP
ON
TTX/MIX AUTO
PRE-CH
EXITMUTE
TV/VIDEO PC DISPLAY STILL
P.STD S.STD
Power
LOCATE
-/--
SIZE
SUBPAGE
SLEEP DUAL I/II LIST/FLOF CANCEL
P.SIZE PIP
ON
TTX/MIX AUTO
PRE-CH
EXITMUTE
TV/VIDEO PC DISPLAY STILL
P.STD S.STD
Power
LOCATE
-/--
SIZE
SUBPAGE
SLEEP DUAL I/II LIST/FLOF CANCEL
P.SIZE PIP
ON
TTX/MIX AUTO
PRE-CH
EXITMUTE
TV/VIDEO
TV/VIDEO
PC
PC
DISPLA
DISPLA
YSTILL
STILL
P.STD
.STD
S.STD
S.STD
Power
LOCATE
-/--
SIZE
SUBPAGE
SLEEP DUAL I/II LIST/FLOF CANCEL
P.SIZE PIP
ON
TTX/MIX AUTO
PRE-CH
EXITMUTE
TV/VIDEO
TV/VIDEO
PC
PC
DISPLA
DISPLA
YSTILL
STILL
P.STD
.STD
S.STD
S.STD
Power
LOCATE
-/--
SIZE
SUBPAGE

English-15
Becoming Familiar with the Remote Control
The remote control is used mainly to:
◆ Change channels and adjust the volume
◆ Set up your set using the on-screen menu system
The following table presents the most frequently used buttons and
their functions.
Button Viewing Function Menu Function
▲ Used to display the next Used to select the previous
Pstored channel. menu option.
PUsed to display the Used to select the next menu
▼ previous stored channel. option.
PRE-CH Used to switch repeatedly between the last two channels
displayed. (PRE-CH; Previous Channel)
to Used to display the corresponding channels.
-/-- Used to select a channel numbered ten or over.
Press this button, and the “
-- ”symbol is displayed.
Enter the two-digit channel number.
Used to decrease the Used to...
volume. ◆Display a submenu containing
selections for the current
menu option.
◆Search forwards manually
for channels
◆Reduce a menu option value.
Used to increase the Used to...
volume. ◆Display a submenu containing
selections for the current
menu option.
◆Search backwards manually
for channels
◆Increase a menu option value.
MUTE Used to switch the sound off temporarily.
➣To turn the sound back on, press this button again, or
press the
- or +button.
MENU Used to display the Used to return to the previous
on-screen menu system. menu or normal viewing.
EXIT Used to exit from the menu system and return to normal
viewing directly.
SLEEP DUAL I/II LIST/FLOF CANCEL
P.SIZE PIP
ON
TTX/MIX AUTO
PRE-CH
EXITMUTE
TV/VIDEO PC DISPLAY STILL
P.STD S.STD
Power
LOCATE
-/--
SIZE
SUBPAGE
SLEEP DUAL I/II LIST/FLOF CANCEL
P.SIZE PIP
ON
TTX/MIX AUTO
PRE-CH
EXITMUTE
TV/VIDEO PC DISPLAY STILL
P.STD S.STD
Power
LOCATE
-/--
SIZE
SUBPAGE
SLEEP DUAL I/II LIST/FLOF CANCEL
P.SIZE PIP
ON
TTX/MIX AUTO
PRE-CH
EXITMUTE
TV/VIDEO PC DISPLAY STILL
P.STD S.STD
Power
LOCATE
-/--
SIZE
SUBPAGE
SLEEP DUAL I/II LIST/FLOF CANCEL
P.SIZE PIP
ON
TTX/MIX AUTO
PRE-CH
EXITMUTE
TV/VIDEO PC DISPLAY STILL
P.STD S.STD
Power
LOCATE
-/--
SIZE
SUBPAGE
SLEEP DUAL I/II LIST/FLOF CANCEL
P.SIZE PIP
ON
TTX/MIX AUTO
PRE-CH
EXITMUTE
TV/VIDEO PC DISPLAY STILL
P.STD S.STD
Power
9
LOCATE
-/--
SIZE
SUBPAGE
SLEEP DUAL I/II LIST/FLOF CANCEL
P.SIZE PIP
ON
TTX/MIX AUTO
PRE-CH
EXITMUTE
TV/VIDEO PC DISPLAY STILL
P.STD S.STD
Power
0
LOCATE
-/--
SIZE
SUBPAGE
SLEEP
SLEEP
DUAL
DUAL
I/II
I/II
LIST/FLOF
LIST/FLOF
CANCEL
CANCEL
P.SIZE
.SIZE
PIP
PIP
ON
ON
TTX/MIX
TTX/MIX
AUT
AUT
O
PRE-CH
PRE-CH
EXIT
EXIT
MUTE
MUTE
TV/VIDEO
TV/VIDEO
PC
PC
DISPLA
DISPLA
YSTILL
STILL
P.STD
.STD
S.STD
S.STD
Power
MENU
1 2 3
4 5 6
7 8 9
0
LOCA
LOCA
TE
TE
-/--
-/--
P
P
SIZE
SIZE
SUBP
SUBP
AGE
AGE

English-16
SLEEP DUAL I/II LIST/FLOF CANCEL
P.SIZE PIP
ON
TTX/MIX AUTO
PRE-CH
EXIT
EXIT
MUTE
MUTE
TV/VIDEO PC DISPLAY STILL
P.STD
.STD
S.STD
S.STD
Power
MENU
LOCATE
-/--
P
P
SIZE
SUBPAGE
Channel
Auto store
Manual store
Name
Add/Erase
Fine tune
Channel sort
Select Enter Exit
Channel
Country ASIA W/EUROPE
Search
Select Adjust Exit
Channel
Select Enter Exit
Country ASIA W/EUROPE
Search
Search
Program P1
Frequency 43MHz
Band VHF-L
3%
Exit
Storing Channels Automatically
You can scan for the frequency ranges available to you (and
availability depends on your country). Automatically allocated
programme numbers may not correspond to actual or desired
programme numbers. However you can sort numbers manually and
clear any channels you do not wish to watch.
1Press the MENU button.
Result:
The main menu is displayed.
2Press the P▼or P▲button to select the Channel.
Result:
The options available in the Channel group are displayed.
3Press the - or +button.
Result:
The Auto store is selected.
4Press the - or +button again.
Result:
The options available in the Auto store group are
displayed with the
Country is selected.
5Select your country by pressing the - or +button repeatedly.
The following countries are available:
ASIA W/EUROPE - CIS E/EUROPE - CHINA - HONGKONG U/K -
AUSTRALIA - NZ/INDONESIA - SOUTH AFRICA - AMERICA.
6Press the P▼or P▲button to select the Search, and then press the
- or +button.
Result: The search will end automatically. Channels are sorted
and stored in an order which reflects their position in the
frequency range, (with lowest first and highest last).
The programme originally selected is then displayed.
➣
To stop the search before it has finished, press the EXIT button.
7When the channels have been stored, you can:
◆Change channels
◆Sort them in the order required (refer to page 17)
◆Assign a name to the stored channels (refer to page 20)
◆Clear a channel (refer to page 21)
◆Fine tune channel reception if necessary (refer to page 21)
SLEEP DUAL I/II LIST/FLOF CANCEL
P.SIZE PIP
ON
TTX/MIX AUTO
PRE-CH
EXITMUTE
TV/VIDEO PC DISPLAY STILL
P.STD S.STD
Power
LOCATE
-/--
SIZE
SUBPAGE
SLEEP DUAL I/II LIST/FLOF CANCEL
P.SIZE PIP
ON
TTX/MIX AUTO
PRE-CH
EXITMUTE
TV/VIDEO PC DISPLAY STILL
P.STD S.STD
Power
LOCATE
-/--
SIZE
SUBPAGE
SLEEP DUAL I/II LIST/FLOF CANCEL
P.SIZE PIP
ON
TTX/MIX AUTO
PRE-CH
EXITMUTE
TV/VIDEO PC DISPLAY STILL
P.STD S.STD
Power
LOCATE
-/--
SIZE
SUBPAGE
SLEEP DUAL I/II LIST/FLOF CANCEL
P.SIZE PIP
ON
TTX/MIX AUTO
PRE-CH
EXITMUTE
TV/VIDEO PC DISPLAY STILL
P.STD S.STD
Power
LOCATE
-/--
SIZE
SUBPAGE
SLEEP DUAL I/II LIST/FLOF CANCEL
P.SIZE PIP
ON
TTX/MIX AUTO
PRE-CH
EXITMUTE
TV/VIDEO PC DISPLAY STILL
P.STD S.STD
Power
LOCATE
-/--
SIZE
SUBPAGE
SLEEP DUAL I/II LIST/FLOF CANCEL
P.SIZE PIP
ON
TTX/MIX AUTO
PRE-CH
EXITMUTE
TV/VIDEO PC DISPLAY STILL
P.STD S.STD
Power
LOCATE
-/--
SIZE
SUBPAGE
SLEEP DUAL I/II LIST/FLOF CANCEL
P.SIZE PIP
ON
TTX/MIX AUTO
PRE-CH
EXITMUTE
TV/VIDEO PC DISPLAY STILL
P.STD S.STD
Power
LOCATE
-/--
SIZE
SUBPAGE
SLEEP DUAL I/II LIST/FLOF CANCEL
P.SIZE PIP
ON
TTX/MIX AUTO
PRE-CH
EXITMUTE
TV/VIDEO PC DISPLAY STILL
P.STD S.STD
Power
LOCATE
-/--
SIZE
SUBPAGE

English-17
Sorting the Stored Channels
You can exchange the numbers of two channels, in order to:
◆ Modify the numeric order in which the channels have been
automatically stored.
◆ Give easily remembered numbers to the channels that you
watch most often.
1Press the MENU button.
Result:
The main menu is displayed.
2Press the P▼or P▲button to select the Channel.
Result:
The options available in the Channel group are displayed.
3Press the - or +button .
4Press the P▼or P▲button to select the Channel sort .
Press the - or +button.
Result:
The options available in the Channel sort group are
displayed with the
From is selected.
5Select the channel number that you wish to change by pressing the
- or +button repeatedly.
6Press the P▼or P▲button to select the To. Select the new number
by which you wish to identify the channel by pressing the
- or
+button repeatedly.
7Press the P▼or P▲button to select the Store. Select the OK to
confirm the exchange of channel numbers by pressing the
- or
+button.
Result:
The selected channel is exchanged with the one
previously stored to the chosen number.
6For all the channels to move to the required channel numbers,
repeat steps 5to 7after select the From by pressing the P▼or P▲
button.
SLEEP DUAL I/II LIST/FLOF CANCEL
P.SIZE PIP
ON
TTX/MIX AUTO
PRE-CH
EXITMUTE
TV/VIDEO PC DISPLAY STILL
P.STD S.STD
Power
LOCATE
-/--
SIZE
SUBPAGE
SLEEP DUAL I/II LIST/FLOF CANCEL
P.SIZE PIP
ON
TTX/MIX AUTO
PRE-CH
EXITMUTE
TV/VIDEO PC DISPLAY STILL
P.STD S.STD
Power
LOCATE
-/--
SIZE
SUBPAGE
SLEEP DUAL I/II LIST/FLOF CANCEL
P.SIZE PIP
ON
TTX/MIX AUTO
PRE-CH
EXITMUTE
TV/VIDEO PC DISPLAY STILL
P.STD S.STD
Power
LOCATE
-/--
SIZE
SUBPAGE
SLEEP DUAL I/II LIST/FLOF CANCEL
P.SIZE PIP
ON
TTX/MIX AUTO
PRE-CH
EXITMUTE
TV/VIDEO PC DISPLAY STILL
P.STD S.STD
Power
LOCATE
-/--
SIZE
SUBPAGE
SLEEP DUAL I/II LIST/FLOF CANCEL
P.SIZE PIP
ON
TTX/MIX AUTO
PRE-CH
EXITMUTE
TV/VIDEO PC DISPLAY STILL
P.STD S.STD
Power
LOCATE
-/--
SIZE
SUBPAGE
SLEEP DUAL I/II LIST/FLOF CANCEL
P.SIZE PIP
ON
TTX/MIX AUTO
PRE-CH
EXITMUTE
TV/VIDEO PC DISPLAY STILL
P.STD S.STD
Power
LOCATE
-/--
SIZE
SUBPAGE
SLEEP DUAL I/II LIST/FLOF CANCEL
P.SIZE PIP
ON
TTX/MIX AUTO
PRE-CH
EXITMUTE
TV/VIDEO PC DISPLAY STILL
P.STD S.STD
Power
LOCATE
-/--
SIZE
SUBPAGE
SLEEP DUAL I/II LIST/FLOF CANCEL
P.SIZE PIP
ON
TTX/MIX AUTO
PRE-CH
EXITMUTE
TV/VIDEO PC DISPLAY STILL
P.STD S.STD
Power
LOCATE
-/--
SIZE
SUBPAGE
SLEEP DUAL I/II LIST/FLOF CANCEL
P.SIZE PIP
ON
TTX/MIX AUTO
PRE-CH
EXITMUTE
TV/VIDEO PC DISPLAY STILL
P.STD S.STD
Power
LOCATE
-/--
SIZE
SUBPAGE
SLEEP DUAL I/II LIST/FLOF CANCEL
P.SIZE PIP
ON
TTX/MIX AUTO
PRE-CH
EXITMUTE
TV/VIDEO PC DISPLAY STILL
P.STD S.STD
Power
LOCATE
-/--
SIZE
SUBPAGE
Channel
Auto store
Manual store
Name
Add/Erase
Fine tune
Channel sort
Select Enter Exit
Channel
From P1 -----
To P-- -----
Store ?
Select Adjust Exit
Channel
From P1 -----
To P3 -----
Store ?
Select Adjust Exit
Channel
From P3 -----
To P1 -----
Store OK
Select Adjust Exit

English-18
Storing Channels Manually
You can store up to 100 channels, including those received via cable
networks. When storing channels manually, you can choose:
◆ Whether or not to store each of the channels found
◆ The programme number of each stored channel which you
wish to identify
1Press the MENU button.
Result:
The main menu is displayed.
2Press the P▼or P▲button to select the Channel.
Result:
The options available in the Channel group are displayed.
3Press the - or +button .
4Press the P▼or P▲button to select the Manual store . Press the
- or +button.
Result:
The options available in the Manual store group are
displayed with the
Colour system is selected.
5If necessary, indicate the broadcasting standard required by pressing
the
- or +button repeatedly.
Result: The color standards are displayed in the following order:
AUTO - PAL - SECAM - NT4.43 - NT3.58.
6Press the P▼or P▲button to select the Sound system. Indicate the
sound standard required by pressing the
- or +button
repeatedly.
Result: The sound standards are displayed in the following order:
BG - DK - I - M.
(continued)
SLEEP DUAL I/II LIST/FLOF CANCEL
P.SIZE PIP
ON
TTX/MIX AUTO
PRE-CH
EXITMUTE
TV/VIDEO PC DISPLAY STILL
P.STD S.STD
Power
LOCATE
-/--
SIZE
SUBPAGE
SLEEP DUAL I/II LIST/FLOF CANCEL
P.SIZE PIP
ON
TTX/MIX AUTO
PRE-CH
EXITMUTE
TV/VIDEO PC DISPLAY STILL
P.STD S.STD
Power
LOCATE
-/--
SIZE
SUBPAGE
SLEEP DUAL I/II LIST/FLOF CANCEL
P.SIZE PIP
ON
TTX/MIX AUTO
PRE-CH
EXITMUTE
TV/VIDEO PC DISPLAY STILL
P.STD S.STD
Power
LOCATE
-/--
SIZE
SUBPAGE
SLEEP DUAL I/II LIST/FLOF CANCEL
P.SIZE PIP
ON
TTX/MIX AUTO
PRE-CH
EXITMUTE
TV/VIDEO PC DISPLAY STILL
P.STD S.STD
Power
LOCATE
-/--
SIZE
SUBPAGE
SLEEP DUAL I/II LIST/FLOF CANCEL
P.SIZE PIP
ON
TTX/MIX AUTO
PRE-CH
EXITMUTE
TV/VIDEO PC DISPLAY STILL
P.STD S.STD
Power
LOCATE
-/--
SIZE
SUBPAGE
SLEEP DUAL I/II LIST/FLOF CANCEL
P.SIZE PIP
ON
TTX/MIX AUTO
PRE-CH
EXITMUTE
TV/VIDEO PC DISPLAY STILL
P.STD S.STD
Power
LOCATE
-/--
SIZE
SUBPAGE
SLEEP DUAL I/II LIST/FLOF CANCEL
P.SIZE PIP
ON
TTX/MIX AUTO
PRE-CH
EXITMUTE
TV/VIDEO PC DISPLAY STILL
P.STD S.STD
Power
LOCATE
-/--
SIZE
SUBPAGE
SLEEP DUAL I/II LIST/FLOF CANCEL
P.SIZE PIP
ON
TTX/MIX AUTO
PRE-CH
EXITMUTE
TV/VIDEO PC DISPLAY STILL
P.STD S.STD
Power
LOCATE
-/--
SIZE
SUBPAGE
Channel
Auto store
Manual store
Name
Add/Erase
Fine tune
Channel sort
Select Enter Exit
Channel
Colour system AUTO
Sound system BG
Search 471MHz
Channel C4
Program P1
Store ?
Select Adjust Exit
Channel
Colour system AUTO
Sound system BG
Search 471MHz
Channel C4
Program P1
Store ?
Select Adjust Exit

English-19
Storing Channels Manually
7If you know the channel number to be stored, press the P▼or P▲
button to select the Channel. Indicate the required number by
pressing the
- or +button.
If you do not know the channel numbers, press the P▼or P▲button
to select the Search. Start the search by pressing the
- or +
button.
Result: The tuner scans the frequency range until the first
channel or the channel that you selected is received on
your screen.
8To assign a programme number to a channel, select the Program by
pressing the P▼or P▲button. Press the
- or +button to
find the correct number.
9Press the P▼or P▲button to select the Store . Select the OK by
pressing the
- or +button .
Result: The channel and associated programme number are
stored.
10 Repeat Steps 7to 9for each channel to be stored.
SLEEP DUAL I/II LIST/FLOF CANCEL
P.SIZE PIP
ON
TTX/MIX AUTO
PRE-CH
EXITMUTE
TV/VIDEO PC DISPLAY STILL
P.STD S.STD
Power
LOCATE
-/--
SIZE
SUBPAGE
SLEEP DUAL I/II LIST/FLOF CANCEL
P.SIZE PIP
ON
TTX/MIX AUTO
PRE-CH
EXITMUTE
TV/VIDEO PC DISPLAY STILL
P.STD S.STD
Power
LOCATE
-/--
SIZE
SUBPAGE
SLEEP DUAL I/II LIST/FLOF CANCEL
P.SIZE PIP
ON
TTX/MIX AUTO
PRE-CH
EXITMUTE
TV/VIDEO PC DISPLAY STILL
P.STD S.STD
Power
LOCATE
-/--
SIZE
SUBPAGE
SLEEP DUAL I/II LIST/FLOF CANCEL
P.SIZE PIP
ON
TTX/MIX AUTO
PRE-CH
EXITMUTE
TV/VIDEO PC DISPLAY STILL
P.STD S.STD
Power
LOCATE
-/--
SIZE
SUBPAGE
SLEEP DUAL I/II LIST/FLOF CANCEL
P.SIZE PIP
ON
TTX/MIX AUTO
PRE-CH
EXITMUTE
TV/VIDEO PC DISPLAY STILL
P.STD S.STD
Power
LOCATE
-/--
SIZE
SUBPAGE
SLEEP DUAL I/II LIST/FLOF CANCEL
P.SIZE PIP
ON
TTX/MIX AUTO
PRE-CH
EXITMUTE
TV/VIDEO PC DISPLAY STILL
P.STD S.STD
Power
LOCATE
-/--
SIZE
SUBPAGE
SLEEP DUAL I/II LIST/FLOF CANCEL
P.SIZE PIP
ON
TTX/MIX AUTO
PRE-CH
EXITMUTE
TV/VIDEO PC DISPLAY STILL
P.STD S.STD
Power
LOCATE
-/--
SIZE
SUBPAGE
SLEEP DUAL I/II LIST/FLOF CANCEL
P.SIZE PIP
ON
TTX/MIX AUTO
PRE-CH
EXITMUTE
TV/VIDEO PC DISPLAY STILL
P.STD S.STD
Power
LOCATE
-/--
SIZE
SUBPAGE
Channel
Colour system AUTO
Sound system BG
Search 471MHz
Channel C4
Program P1
Store ?
Select Adjust Exit
Channel
Colour system AUTO
Sound system BG
Search 471MHz
Channel C4
Program P1
Store ?
Select Adjust Exit
Channel
Colour system AUTO
Sound system BG
Search 471MHz
Channel C4
Program P1
Store ?
Select Adjust Exit
Channel
Colour system AUTO
Sound system BG
Search 471MHz
Channel C4
Program P1
Store OK
Select Adjust Exit

English-20
Giving Channels Names
If channel name information is broadcast when you store the channels
either manually or automatically, the names are assigned to the
channels directly. You can however change these names or assign new
names as required.
1Press the MENU button.
Result:
The main menu is displayed.
2Press the P▼or P▲button to select the Channel.
Result:
The options available in the Channel group are displayed.
3Press the - or +button .
4Press the P▼or P▲button to select the Name . Press the - or
+button.
Result:
The current channels are displayed.
5If necessary, select the channel to be assigned to a new name by
pressing the P▼or P▲button.
6Press the - or +button.
7Press the P▼or P▲button to select a letter (A~Z), a number(0~9)
or a symbol (
- , space). Move on the previous or next letter by
pressing the
- or +button.
8Repeat Steps 5to 7for each channel to be assigned to a new
name.
SLEEP DUAL I/II LIST/FLOF CANCEL
P.SIZE PIP
ON
TTX/MIX AUTO
PRE-CH
EXITMUTE
TV/VIDEO PC DISPLAY STILL
P.STD S.STD
Power
LOCATE
-/--
SIZE
SUBPAGE
SLEEP DUAL I/II LIST/FLOF CANCEL
P.SIZE PIP
ON
TTX/MIX AUTO
PRE-CH
EXITMUTE
TV/VIDEO PC DISPLAY STILL
P.STD S.STD
Power
LOCATE
-/--
SIZE
SUBPAGE
SLEEP DUAL I/II LIST/FLOF CANCEL
P.SIZE PIP
ON
TTX/MIX AUTO
PRE-CH
EXITMUTE
TV/VIDEO PC DISPLAY STILL
P.STD S.STD
Power
LOCATE
-/--
SIZE
SUBPAGE
SLEEP DUAL I/II LIST/FLOF CANCEL
P.SIZE PIP
ON
TTX/MIX AUTO
PRE-CH
EXITMUTE
TV/VIDEO PC DISPLAY STILL
P.STD S.STD
Power
LOCATE
-/--
SIZE
SUBPAGE
SLEEP DUAL I/II LIST/FLOF CANCEL
P.SIZE PIP
ON
TTX/MIX AUTO
PRE-CH
EXITMUTE
TV/VIDEO PC DISPLAY STILL
P.STD S.STD
Power
LOCATE
-/--
SIZE
SUBPAGE
SLEEP DUAL I/II LIST/FLOF CANCEL
P.SIZE PIP
ON
TTX/MIX AUTO
PRE-CH
EXITMUTE
TV/VIDEO PC DISPLAY STILL
P.STD S.STD
Power
LOCATE
-/--
SIZE
SUBPAGE
SLEEP DUAL I/II LIST/FLOF CANCEL
P.SIZE PIP
ON
TTX/MIX AUTO
PRE-CH
EXITMUTE
TV/VIDEO PC DISPLAY STILL
P.STD S.STD
Power
LOCATE
-/--
SIZE
SUBPAGE
SLEEP DUAL I/II LIST/FLOF CANCEL
P.SIZE PIP
ON
TTX/MIX AUTO
PRE-CH
EXITMUTE
TV/VIDEO PC DISPLAY STILL
P.STD S.STD
Power
LOCATE
-/--
SIZE
SUBPAGE
Channel
Auto store
Manual store
Name
Add/Erase
Fine tune
Channel sort
Select Enter Exit
Channel
P1 -----
P2 -----
P3 -----
P4 -----
Select Adjust Exit
Channel
Auto store
Manual store
Name
Add/Erase
Fine tune
Channel sort
Select Enter Exit