Samsung LW32A33W User manual

LCD TV
LW32A33W
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
-
AFTER SALES SERVICE
-
Do not hesitate to contact your retailer or service agent if a
change in the performance of your product indicates that a
faulty condition may be present.
B 68-00653F-00
ELECTRONICS
ON-SCREEN MENUS
PC DISPLAY
PICTURE IN PICTURE (PIP)
TELETEXT
This device is a class B digital apparatus.
LCD TV
LW32A33W
653Fcover.qxd 4/13/04 4:02 PM Page 1

LCD TV
LW32A33W
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
ON-SCREEN MENUS
PC DISPLAY
PICTURE IN PICTURE (PIP)
TELETEXT
This device is a class B digital apparatus.
BN68-00653C-00Eng 4/13/04 4:42 PM Page 1

English-2
Contents
CONNECTIN AND PREPARIN YOUR TV
Viewing the ontrol Panel ......................................................................................... 4
Viewing the onnection Panel................................................................................... 5
- onnecting an Aerial or able Television Network ............................................... 5
- onnecting Set-Top Box, V R or DVD ................................................................. 5
- onnecting External A/V Devices .......................................................................... 6
- onnecting omponent Devices (DTV/DVD) ....................................................... 6
- onnecting omputer ............................................................................................ 7
- onnecting DVI....................................................................................................... 7
- onnecting Sub Woofer ......................................................................................... 7
- onnecting HDMI (High-Definition Multimedia Interface) ..................................... 7
Viewing the Remote ontrol (All Functions Except Teletext) ................................... 8
Viewing the Remote ontrol (Teletext Functions)..................................................... 9
Installing Batteries in the Remote ontrol................................................................. 10
Switching On and Off................................................................................................. 11
Placing Your Television in Standby Mode ................................................................. 11
Becoming Familiar with the Remote ontrol ............................................................ 12
Plug and Play ............................................................................................................. 13
hoosing Your Language .......................................................................................... 14
SETTIN THE CHANNELS
Storing hannels Automatically................................................................................. 15
Storing hannels Manually........................................................................................ 16
Editing the hannels .................................................................................................. 18
Sorting the Stored hannels ..................................................................................... 19
Assigning hannels Names ...................................................................................... 20
Fine Tuning hannel Reception ................................................................................ 21
LNA (Low Noise Amplifier)......................................................................................... 22
SETTIN THE PICTURE
hanging the Picture Standard ................................................................................. 23
Adjusting the ustom Picture .................................................................................... 24
hanging the olour Tone ......................................................................................... 25
hanging the Picture Size ......................................................................................... 25
Freezing the urrent Picture...................................................................................... 26
DNIe(Digital Natural Image engine) .......................................................................... 26
M (My olour ontrol) .......................................................................................... 27
I2 (Intelligent Image ontrol)................................................................................... 28
IB (Intelligent Brightness ontrol) ........................................................................... 29
Viewing the Picture In Picture (PIP) .......................................................................... 30
SETTIN THE SOUND
Adjusting the Volume ................................................................................................. 32
Switching the Sound Off Temporarily ........................................................................ 33
hanging the Sound Standard .................................................................................. 34
Adjusting the Sound Settings .................................................................................... 34
Setting the TruSurround XT(SRS TSXT) .................................................................. 35
Do not display a still image (such as on a video game or when hooking up a DVD to
this L D TV) on the olor TFT-L D (Thin Film Transister Liquid rystal Display)
panel for a long time as it can cause screen image retention. This image retention is
also known as “screen burn”. To avoid such image retention, reduce the degree of
brightness and contrast of this screen when displaying a still image.
BN68-00653C-00Eng 4/13/04 4:42 PM Page 2

English-3
Contents
SETTIN THE SOUND
Adjusting the Volume Automatically .......................................................................... 35
onnecting Headphones ........................................................................................... 36
Adjusting Your Headphone Preferences ................................................................... 36
Listening to the Sound of the Sub Picture ................................................................ 37
Sub Woofer................................................................................................................. 37
SETTIN THE TIME
Setting and Displaying the urrent Time .................................................................. 38
Setting the Sleep Timer.............................................................................................. 39
Switching the Television On and Off Automatically................................................... 40
SETTIN THE OTHERS
Setting the Blue Screen Mode................................................................................... 41
olour Weakness....................................................................................................... 42
Selecting the Melody ................................................................................................. 43
Selecting a Device from External Sources................................................................ 44
Viewing Pictures from External Sources ................................................................... 44
SETTIN THE PC
Setting up Your P Software (Based on Windows 2000 or XP) ........................ 45
Adjusting the P Screen Automatically .............................................................. 46
oarse and Fine Tuning of the Image ................................................................ 47
hanging the Image Position.............................................................................. 48
Initializing the Image Settings ............................................................................. 49
USIN THE TELETEXT FEATURE
Teletext Decoder ........................................................................................................ 50
Displaying the Teletext Information............................................................................ 50
Selecting a Specific Teletext Page ............................................................................ 51
Using FLOF to Select a Teletext Page...................................................................... 52
RECOMMENDATIONS FOR USE
Troubleshooting: Before ontacting Service Personnel........................................... 53
Installing Stand........................................................................................................... 54
Using the Anti-Theft Kensington Lock ....................................................................... 55
How to install the wall Bracket................................................................................... 56
Technical and Environmental Specifications............................................................. 58
Display Mode (P ) ..................................................................................................... 59
Pin onfigurations...................................................................................................... 60
Wiring the Mains Power Supply Plug (UK Only) ...................................................... 61
Setting Up Your Remote ontrol ............................................................................... 62
Press Important Note
Symbols
BN68-00653C-00Eng 4/13/04 4:43 PM Page 3

English-4
Viewing the Control Panel
SOURCE
Displays a menu of all of the available
input sources (TV, Ext.1, Ext.2, AV3,
S-Video, omponent, HDMI, DVI, P ).
You can also use the SOUR E buttons
on the TV’s control panel to make selection.
MENU
Press to see an on-screen menu of
your TV’s features.
- +
Press to decrease or increasethe volume.
Also used to select items on the
on-screen menu.
C/P.
Press to change channels.
Also press to highlight various items
on the on-screen menu.
(Without the Remote ontrol, You can
turn on TV by using the hannel buttons.)
(Power)
Press to turn the TV on and off.
Light Detecting Sensor
Adjusts brightness of screen automatically by
detecting brightness of surrounding environment.
This sensor works when IB is on.
Remote Control Sensor
Aims the remote control towards this spot
on the TV.
Power Indicator
Lights up when you turn the power off.
When you turn the power off after selecting On/Off
Timer, green light will appear.
BN68-00653C-00Eng 4/13/04 4:43 PM Page 4

English-5
Viewing the Connection Panel
Whenever you connect an audio or video system to your set, ensure that all elements are
switched off.
Connecting an Aerial or Cable Television Network
To view television channels correctly, a signal must be received by the set from one of the following sources:
- An outdoor aerial
- A cable television network
- A satellite network
Connecting Set-Top Box, VCR or DVD
- onnect the V R or DVD S ART cable to the S ART connector of the V R or DVD.
- If you wish to connect both the Set-Top Box and V R (or DVD), you should connect the Set-Top Box
to the V R (or DVD) and connect the V R (or DVD) to your set.
Input Output Specification
Power Input
1
2
Connector
S ART 1
S ART 2
Video Audio (L/R) S-Video R B Video+Audio (L/R)
✔✔ ✔ Only TV Out
✔✔ Monitor Out
(TV/Ext.1/Ext.2/AV3/S-VHS)
Input Output
BN68-00653C-00Eng 4/13/04 4:43 PM Page 5

English-6
Viewing the Connection Panel
Connecting External A V Devices
- onnect R A or S-VIDEO cable to an appropriate external A/V device such as V R, DVD or amcorder.
- onnect R A audio cables to “
AUDIO(L) ” and “ AUDIO(R) ” on the rear of your set and the other ends to
corresponding audio out connectors on the A/V device.
- Headphone may be connected to the headphone output ( ) on the rear of your set. While the headphone
is connected, the sound from the built-in speakers will be disabled.
Connecting Component Devices (DTV DVD)
- onnect component video cables to component connector (“Y”,“PB”,“PR”) on the rear of your set and the
other ends to corresponding component video out connectors on the DTV or DVD.
- If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box to the
DTV (or DVD) and connect the DTV (or DVD) to component connector
(“Y”,“PB”,“PR”) on your set.
- The Y, Pb and Pr connectors on your component devices (DTV or DVD) are sometimes labeled Y, B-Y and
R-Y or Y, b and r.
- onnect R A audio cables to “
AUDIO(L) ” and “ AUDIO(R) ” on the rear of your set and the other ends to
corresponding audio out connectors on the DTV or DVD.
5
Source Video Horizontal Frequency Vertical Frequency Resolution
(kHz) (Hz) (Lines)
Source PAL 15.625 50 575
SE AM 15.625 50 575
NTS 4.43 15.734 60 483
NTS 3.58 (Except RF) 15.704 60 483
Component 480/60i 15.734 60 483
480/60p 31.469 60 483
576/50i 15.625 50 576
576/50p 31.250 50 576
720/60p 45.000 60 720
1080/50i 28.125 50 1080
1080/60i 33.750 60 1080
3
4
BN68-00653C-00Eng 4/13/04 4:43 PM Page 6

English-7
Viewing the Connection Panel
Connecting Computer
- onnect the D- Sub cable to “PC (PC IN)” on the rear of your set.
- onnect the stereo audio cable to “AUDIO (PC IN)” on the rear of your set and the other end to
“Audio Out” of the sound card on your computer.
Connecting DVI
- onnect the DVI connector to the DVD connector.
- onnect the stereo audio cable to “L - Audio - R” on the rear of your set and the other end to
“Audio Out” of the sound card on your DVD.
- DVI dose not support P function.
Connecting Sub Woofer
Connecting HDMI (High-Definition Multimedia Interface)
Supports connections between HDMI-connection-enabled AV devices (set top boxes, DVD players, AV
receivers and digital TVs).
What is HDMI?
- HDMI , or high-definition multimedia interface, is a next-generation interface that enables the
transmission of digital audio and video signals using a single cable without compression.
-“
Multimedia interface ” is a more accurate name for it especially because it allows multiple channels of
digital audio (5.1 channels).The difference between
HDMI and DVI is that the HDMI device is smaller
in size, has the
HDCP coding feature installed, and supports multi - channel digital audio.
6
7
8
9
BN68-00653C-00Eng 4/13/04 4:43 PM Page 7

English-8
NUMERI BUTTONS
ONE/TWO-DIGIT HANNEL SELE TION
VOLUME IN REASE
(Refer to page 32)
SOUND STANDARD SELE TION
(Refer to page 34)
AUTOMATI SWIT H-OFF
(Refer to page 39)
DNIe SELE TION
(Refer to page 26)
SET
(Refer to page 62~64)
P MODE SELE TION
(Refer to page 46)
VCR/DVD FUNCTIONS;
:REWIND
 :STOP
 :PLAY/PAUSE
:FAST FORWARD
TEMPORARY SOUND SWIT H OFF
(Refer to page 33)
ON-S REEN DISPLAY
(Refer to page 12)
STILL THE MAIN PI TURE
(Refer to page 26)
PI TURE STANDARD SELE TION
(Refer to page 23)
MAKE THE REMOTE ONTROL
WORKS FOR TV, V R, ABLE,
DVD, STB
(Refer to page 62~65)
INFORMATION DISPLAY ( URRENT
HANNEL AND AUDIO/VIDEO
SETTINGS)
(Refer to page 38)
PREVIOUS HANNEL
NEXT HANNEL
(Refer to page 11)
PREVIOUS HANNEL
(Refer to page 11)
VIDEO INPUT SOUR E SELE TION
(Refer to page 44)
EXIT FROM THE OSD
HANGE ONFIRMATION
ONTROL THE URSOR IN THE MENU
(Refer to page 12)
SRS TSXT SELE TION
(Refer to page 35)
SOUND MODE SELE TION
PIP FUNCTIONS; (Refer to page 30~31)
PIP ON : PIP ON/OFF
P / : PIP HANNEL SELE TION
SWAP : INTER HANGE THE MAIN
AND SUB PI TURE
The performance of the remote control may be affected by bright light.
DISPLAY SELE TED INPUT SOUR E
AND BATTERY STATUS
VOLUME DE REASE
(Refer to page 32)
TELEVISION STANDBY BUTTON
(Refer to page 11)
TV MODE INFORMATION DISPLAY
PI TURE SIZE SELE TION
(Refer to page 25)
Reset :
When your remote does not work,
change the batter ies and press the
“Reset” button for 2-3 seconds before use.
>
<
Viewing the Remote Control (All Functions Except Teletext)
BN68-00653C-00Eng 4/13/04 4:43 PM Page 8

English-9
Viewing the Remote Control (Teletext Functions)
TELETEXT HOLD
TELETEXT AN EL
TELETEXT INDEX
TELETEXT REVEAL
TELETEXT NEXT PAGE
TELETEXT PREVIOUS PAGE
TELETEXT SUB-PAGE
TELETEXT SIZE SELE TION
TELETEXT DISPLAY/MIX
Teletext Function : Refer to page 50 - 52 for details
BN68-00653C-00Eng 4/13/04 4:43 PM Page 9

English-10
Installing Batteries in the Remote Control
1Slide the cover out completely.
2Install two AAA size batteries.
Make sure to match the “+” and “–” ends of the batteries with
the diagram inside the compartment.
3Replace the cover.
Remove the batteries and store them in a cool, dry place
if you won’t be using the remote control for a long time.
The remote control can be used up to about 23 feet from the TV.
(Assuming typical TV usage, the batteries last for about one year.)
The remote control doesn’t work!
heck the following:
1. Is the TV power switch on?
2. Are the plus end and the minus end of the battery reversed?
3. Did the battery run out?
4. Is there a power outage?
5. Is the power cord unplugged?
6. Is there a special fluorescent light or a neon sign nearby?
BN68-00653C-00Eng 4/13/04 4:43 PM Page 10

English-11
Switching On and Off
Placing Your Television in Standb Mode
Your set can be placed in Standby mode, in order to reduce the power
consumption. The Standby mode can be useful when you wish to
interrupt viewing temporarily (during a meal, for example).
1Press the POWER ( ) button on the remote control.
Result:
The screen is turned off and a orange standby indicator
appears on the front of your set.
2To switch your set back on, simply press the POWER ( ), numeric
buttons (0~9) or channel up/down ( / ) button again.
Do not leave your set in Standby mode for long periods of time (when
you are away on holiday, for example).
Turn your set off by pressing the
POWER ( ) button on the right-side
of the set.
It is best to unplug the set from the mains and aerial.
1. Use of the '
POWER ()' button on the remote is possible only when
the TV is in 'Power Saving' (standby) mode. If the TV is powered off,
the remote cannot be used to turn the TV on.
2. To retain the time and or automatic alarm settings, always put the TV
in stand-by mode with the remote control. Use of the the power switch
on the TV will clear all time related settings. [Benefit] This full 'power
off' function is as effective as unplugging the power cable.
TV switches to standby mode when powered off by the remote control.
To return power ( ) to the screen, press the remote control 'ON' or
channel button( ). Pressing the power button on the TV does not
return power to the screen because in this case, the TV restores the
last mode, which was 'Power Saving'.
The mains lead is attached to the rear of your set.
If you have purchased this set in the United Kingdom,
refer to page 61 for further instructions on plug wiring.
1Plug the mains lead into an appropriate socket.
Result: The main voltage is indicated on the rear of your set and
the frequency is 50 or 60Hz.
2Press the POWER ( ) button on the right-side of your set.
Result: The standby indicator right on the front panel.
3 Press the numeric button (0~9) or channel up/down ( / ) button
on the remote control or C/P. button on
the
right-side of your set.
Result: The programme that you were watching last is reselected
automatically.
When you switch the set on for the very first time, you will be
asked to choose language in which the menus are to be
displayed (see page 14).
4To switch your set off, press the POWER ( ) button again.
BN68-00653C-00Eng 4/13/04 4:43 PM Page 11

English-12
Becoming Familiar with the Remote Control
The remote control is used mainly to:
Change channels and adjust the volume
Set up your set using the on-screen menu system
The following table presents the most frequently used buttons and
their functions.
Button Viewing Function Menu Function
Used to display the
-
next stored channel.
Used to display the
-
previous stored channel.
~ Used to display the corresponding channels.
For double digit channels, the second digit
must be pushed immediately after the first.
Failure to do this will result in a single digit
channel being displayed.
_/_ _ Used to select a channel numbered ten or over.
Press this button, and enter the two digit channel
number.
Used to increase the
-
volume.
Used to decrease the
-
volume.
MUTE Used to switch the sound off temporarily.
To turn the sound back on, press this button
again, or press the
+
/
-
button.
MENU Used to display the Used to return to the
on-screen menu system.
previous menu or
normal viewing.
EXIT Used to exit the On-Screen menu system.
Used to move among the menu items.
Used to select a menu item or increase
the value of the selected item.
Used to return to the previous menu item or
decrease the value of the selected item.
- Used to confirm your
ENTER choice.
BN68-00653C-00Eng 4/13/04 4:43 PM Page 12

English-13
Plug and Pla
When the set is initially powered ON, several basic customer settings
proceed automatically and subsequently.
The following settings are available.
1If the set is in standby mode, press the POWER ( ) button on the
remote control.
Result: The message
Plug & Play is displayed.
It appears for a little while, and then the
Language
menu is automatically displayed.
2Select the appropriate Language by pressing the or button.
The available languages are listed
.
You can choose one of 18 languages.
3Press the ENTER button to confirm your choice.
Result: The message Antenna Input Check is displayed
with the
OK is selected.
4Press the ENTER button.
Result: The following countries are available:
Belgium - Deutschland - Spain - France -
Italy - Netherlands - Switzerland - Sweden - UK -
E. Europe - Others
5Select your Area by pressing the or button.
Press the
ENTER button.
Result:
The Auto Store menu is displayed.
6Press the ENTER button.
Result:
The channel search will start and end automatically.
7Select the Hour or min by pressing the or button.
Set the
Hour/min by pressing the or button.
(Refer to
“Setting and Displaying the Current Time”
on page 38)
8Press the MENU button to confirm your setting.
Result:
The message Enjoy your watching is displayed,
and then the channel which has been stored will be
activated.
Plug & play
Switzerland
Sweden
UK
E. Europe
Others
Skip
Move Enter
Area
Plug & play
Stop
554 MHz P 1 C 0
63 %
Skip
Enter
Auto Store
Clock
Hour min
00 00
Skip
Move Adjust
Enjoy your watching
BN68-00653C-00Eng 4/13/04 4:43 PM Page 13

English-14
Plug and Pla
If you want to reset this feature...
1Press the MENU button.
Result:
The main menu is displayed.
2Press the or button to select Setup .
Press the
ENTER button .
Result: The options available in the Setup group are displayed.
3Press the or button to select Plug & Play .
4Press the ENTER button .
Result: The message is Plug & Play displayed.
5For further details on how to set, refer to the previous page.
Choosing Your Language
When you start using your set for the first time, you must select the
language which will be used for displaying menus and indications.
1Press the MENU button.
Result:
The main menu is displayed.
2Press the or button to select Setup .
Result:
The options available in the Setup group are displayed.
3Press the ENTER button .
4Press the or button
to select
Language .
Press the ENTER button .
Result: The available languages are listed.
5Select a particular language by pressing the or button
repeatedly.
Press the
ENTER button .
You can choose one of 18 languages.
6When you are satisfied with your choice, press the EXIT button to
return to normal viewing.
BN68-00653C-00Eng 4/13/04 4:43 PM Page 14

English-15
Storing Channels Automaticall
You can scan for the frequency ranges available to you (and availability
depends on your country). Automatically allocated programme numbers
may not correspond to actual or desired programme numbers. However
you can sort numbers manually and clear any channels you do not wish
to watch.
1Press the MENU button.
Result:
The main menu is displayed.
2Press the or button to select Channel .
Result: The options available in the
Channel group are
displayed.
3Press the ENTER button .
Result:
The
Country is selected.
4Press the ENTER button again . Select your Country
by pressing the or button repeatedly.
Result: The following countries are available:
Belgium - Deutschland - Spain - France -
Italy - Netherlands - Switzerland - Sweden - UK -
E. Europe - Others
5Press the ENTER button .
6Press the or button to select Auto Store .
Press the
ENTER button .
Result: The Start is selected.
7Press the ENTER button to search the channels.
The sub menu is changed from
Start to Stop with channel search
started.
Result: The search will end automatically. hannels are sorted
and stored in an order which reflects their position in the
frequency range (with lowest first and highest last).
The programme originally selected is then displayed.
To return to the previous menu, press the
MENU button.
To stop the search before it has finished, press the
ENTER button with stop selected.
8When the channels have been stored, you can:
Sort them in the order required (refer to page 19)
Assign a name to the stored channels (refer to page 20)
Add or delete the channels (refer to page 18)
Fine tune channel reception if necessary (refer to page 21)
Activate the LNA (Low Noise Amplifier) feature (refer to page 22)
T V Channel
Country : Others  
Auto Store  
Manual Store  
Add/Delete 
Sort 
Name 
Fine Tune 
LNA : Off 
Move Enter Return
T V Channel
Country : Others 
Auto Store 
Manual Store 
Add/Delete
Sort
Name
Fine Tune
LNA :
Move Enter Return
Belgium
Deutschland
Spain
France
Italy
Netherlands
Switzerland
T V Channel
Country : Others 
Auto Store 
Manual Store 
Add/Delete
Sort
Name
Fine Tune
LNA :
Sweden
UK
E. Europe
Others
Move Enter Return
BN68-00653C-00Eng 4/13/04 4:43 PM Page 15

You can store up to 100 channels, including those received via cable
networks. When storing channels manually, you can choose:
Whether or not to store each of the channels found
The programme number of each stored channel which you
wish to identify
1Press the MENU button.
Result:
The main menu is displayed.
2Press the or button to select Channel .
Result: The options available in the
Channel group are
displayed.
3Press the ENTER button .
4Press the or button to select Manual Store .
Press the ENTER button.
Result: The options available in the
Manual Store menu are
displayed with
Programme selected.
5Press the ENTER button again.
To assign a programme number to a channel, find the correct
number by pressing the or button and then press the
ENTER button .
6Press the or button to select Colour System and then
press the
ENTER button.
Select the
Colour System required by pressing the or
button repeatedly and then press the
ENTER button.
Result: The colour standards are displayed in the following order:
AUTO - PAL - SECAM - NT4.43
7Press the or button to select Sound System and then
press the
ENTER button.
Select the sound standard required by pressing the or
button repeatedly and then press the
ENTER button.
Result: The sound standards are displayed in the following order:
B - DK - I - L
8For all the channels to move to the required channel numbers,
repeat steps
5 to 7 after selecting Programme by pressing
or button
.
English-16
Storing Channels Manuall
T V Manual Store
Move Enter Return
Programme : 8 C6
Colour System : AUTO
Sound System : B
Channel : C 6
Search : 182 MHz
Store : No
T V Manual Store
Move Enter Return
Progrsmme : 8 C6
Colour System : AUTO
Sound System : B
Channel : C 6
Search : 182 MHz
Store : No
T V Manual Store
Move Enter Return
Programme : 8 C6
Colour System : AUTO
Sound System : B
Channel : C 6
Search : 182 MHz
Store : No
AUTO
PAL
SECAM
NT 4.43
T
V T V Manual Store
Move Enter Return
Programme : 8 C6
Colour System : AUTO
Sound System : B
Channel : C 6
Search : 182 MHz
Store : No
T
V T V Manual Store
Move Enter Return
Programme : 8 C6
Colour System : AUTO
Sound System:B
Channel : C 6
Search : 182 MHz
Store : No
B
DK
I
L
BN68-00653C-00Eng 4/13/04 4:43 PM Page 16

9If you know the number of the channel to be stored....
Press the or button to select Channel and then
press the
ENTER button.
Select C(Air channel) or S( able channel) by pressing the
or button.
Press the button to select hannel.
Select the required number by pressing the or button and
then press the
ENTER button.
If there is abnormal sound or no sound, re-select the sound
system required.
10 If you do not know the channel numbers, press the or button
to select
Search and then press the ENTER button.
Search by pressing or button and then press the ENTER
button.
Result: The tuner scans the frequency range until the first
channel or the channel that you selected is received
on your screen.
11 Press the or button to select Store and then press the
ENTER button.
Select
Yes by pressing the or button and then press the
ENTER button.
Result: The channel and associated programme number are
stored.
12 Repeat Steps 9 to 11 for each channel to be stored.
Channel mode
P(Programme mode): When tuning is completed, the
broadcasting stations in your area will have been assigned to
position numbers from P00 to P99. You can select a channel by
entering the position number in this mode.
C (Real channel mode): You can select a channel by entering
the assigned number to each broadcast station in this mode.
S ( able channel mode): You can select a channel by entering
the assigned number to each cable channel in this mode.
English-17
T V Manual Store
Move Adjust Return
Programme : 8 C6
Colour System : AUTO
Sound System : B
Channel : C 6
Search : 182 MHz
Store : No
T V Manual Store
Adjust Enter Return
Programme : 8 C6
Colour System : AUTO
Sound System : B
Channel : C 6
Search : 182 MHz
Store : No
T V Manual Store
Adjust Enter Return
Programme : 8 C6
Colour System : AUTO
Sound System : B
Channel : C 6
Search : 182 MHz
Store : Yes
Storing Channels Manuall
BN68-00653C-00Eng 4/13/04 4:43 PM Page 17

You can exclude the channels you chosen from the channels you
scanned. When you scan through the stored channels, those you have
chosen to skip are not displayed.
All channels that you do not specifically choose to skip are displayed
during scanning.
1Press the MENU button.
Result:
The main menu is displayed.
2Press the or button to select Channel .
Press the
ENTER button .
Result: The options available in the Channel group are
displayed.
3Press the or button to select Add/Delete .
Press the ENTER button.
Result:
The state of current channel is displayed.
4Press the / button to select Channel that you wish to
Add or Delete .
Result:
If the channel that you wish to edit is not in memory, the
Add is selected and displayed.
Otherwise, if the channel that you wish to edit is in
memory, the Delete is selected and displayed.
5Press the ENTER button to Add or Delete channel.
6To return to the previous menu, press the MENU button.
7Repeat Step 4 and 6 for each channel to be added or deleted.
English-18
Editing the Channels
T V Channel
Country : Others  
Auto Store  
Manual Store  
Add/Delete 
Sort 
Name 
Fine Tune 
LNA : Off 
Move Enter Return
Add/Delete
Add
Prog.No 8 Not In Memory
Return
Enter
Prog. Change
CH
Add/Delete
Delete
Prog.No 8 In Memory
Return
Enter
Prog. Change
CH
BN68-00653C-00Eng 4/13/04 4:43 PM Page 18

English-19
Sorting the Stored Channels
You can exchange the numbers of two channels, in order to:
Modify the numeric order in which the channels have been
automatically stored.
Give easily remembered numbers to the channels that you
watch most often.
1Press the MENU button.
Result:
The main menu is displayed.
2Press the or button to select Channel .
Press the
ENTER button .
Result: The options available in the Channel group are
displayed.
3Press the or button to select Sort .
Press the ENTER button.
Result: The
Prog. , Channel and Name are displayed.
4Select the Channel number that you wish to change by pressing the
or button repeatedly.
Press the
ENTER button .
Result: The selected Channel number and Name is moved
to right side.
5Press the or button to move to the position which you would
like to change and then press the
ENTER button.
Result:
The selected channel is exchanged with the one
previously stored to the chosen number.
6Repeat step 4 to 5 for another channel to sort again.
T V Channel
Country : Others  
Auto Store  
Manual Store  
Add/Delete 
Sort 
Name 
Fine Tune 
LNA : Off 
Move Enter Return
T V Sort
Move Enter Return
Prog. Channel Name
P 1 - -- -----
P 2 - -- -----
P 3 - -- -----
P 4 - -- -----
P 5 - -- -----
T V Sort
Move Enter Return
Prog. Channel Name
P 2 - -- -----
P 3 - -- -----
P 4 - -- -----
P 5 - -- -----
- --
BN68-00653C-00Eng 4/13/04 4:43 PM Page 19