Samsung LN40D610M4F User manual

2011 Samsung TV
2011
Samsung
TV
F/W Upgrade Guide
Samsung Electronics

Model List
LCD TV
LCD
TV
LN40D610M4F, LN46D610M4F
LN40D630M3F, LN46D630M3F

Step1. How to prepare the USB Memory Drive
1S h fi fil
2. Connect the USB Memory Drive
to the USB port of your PC.
1
.
S
ave t
h
e
fi
rmware
fil
e onto your computer.
File Name : T-VALDAUSC.exe
Copy the file onto the USB Memory Drive.
3. Go to the USB Memory Drive and then double click the file.
4 Cli k th “U i ” b tt
5U i i i i
4
.
Cli
c
k
on
th
e
“U
nz
i
p
”
b
u
tt
on.
5
.
U
nz
i
pp
i
ng
i
s
i
n progress.
6. After completing, click on the
“O ” “C ”
7. A folder containing the firmware files
S
“O
K
”
and
“C
lose
”
buttons. has been added to the U
S
B memory drive.
Folder name : T-VALDAUSC
8. Safely disconnect the USB memory drive
by right clicking the green check mark
OK
by
right
clicking
the
green
check
mark
on the taskbar and then left click
“Safely Remove”.
OK

[Step 5] The message below is displayed.
Sele t “OK” the e the ENTER
Step2. How to upgrade the firmware
[Step 1] Turn the TV on
[Step 2] Insert the USB Memory Drive
containing the Software into the USB1
or 2
p
ort on the side of the TV
Sele
c
t
“OK”
,
the
n pr
e
ss
the
ENTER
button.
p
And then software is upgraded
automatically.
[Step 3] Press the ▲or ▼button
on Remote to select “Software Upgrade”,
then press the ENTER button [Step 6] When the Software upgrade
is complete; the TV will turn off and
then back on by itself.
[Step 4] The message “Scanning for USB.
This may take more 1 min.” is displayed.
If “Software Upgrade” is not activated,
please wait for 1~2 minutes.