Samsung PRELIMINARY LN40B650 User manual

Contact 8AMSUNG WORLDWIDE
if you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
Comuniquese con 8AMSUNG WORLDWIDE
Si desea formular alguna pregunta o comentario en relaci6n con los productos de Samsung, comuniquese con el centro de
atenci6n al cliente de SAMSUNG.
Samsung Electronics Canada Inc., Customer
Service 55 Standish Court Mississauga,
Ontario L5R 4B2 Canada
CANADA 1-800-SAMSU NG(726-7864) www.samsung.com/ca Samsung Electronique Canada Inc., Service
&la Clientele 55 Standish Court Mississauga,
Ontario L5R 4B2 Canada
Samsung Electronics America, Inc.
U.S.A 1-800-SAMSUNG(726-7864) www.samsung.com/us 105 Challenger Road
Ridgefield Park, NJ 07660-0511
IBN68-02097A-00
imagine the possibilities
Thank you for purchasing this Samsung product,
To receive more complete service, please
register your product at
www.samsu ng.com/reg ister
ModeJ Serial No

C3 important Warranty information Regarding Television Format Viewing
See the warranty card for more information onwarranty terms.
Wide screen format LCD Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen
format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to
fill the screen if your model offers this feature and the images are constantly moving. Displaying stationary graphics and images
on screen, such as the dark sidebars on nonexpanded standard format television video and programming, should belimited to no
more than 5% of the total television viewing per week.
Additionally, viewing other stationary images and text such as stock market reports, video game displays, station Iogos, web sites
or computer graphics and patterns, should be limited as described above for all televisions. Displaying stationary images that
exceed the above guidelines can cause uneven aging of LCD Displays that leave subtle, but permanent burned-in ghost images in
the LCD picture. To avoid this, vary the programming and images, and primarily display full screen moving images, not stationary
patterns or dark bars.
On LCD models that offer picture sizing features, use these controls toview different formats as afull screen picture.
Becareful in the selection and duration of television formats used for viewing. Uneven LCD aging as a result of format selection
and use, as well as burned-in images, are not covered by your Samsung limited warranty.
U.S.A Only
The product unit accompanying this user manual is licensed under certain intellectual property rights of certain third parties.
In particular, this product is licensed under the following USpatents: 5,991,715, 5,740,317, 4,972,484, 5,214,678, 5,323,396,
5,539,829, 5,606,618, 5,530,655, 5,777,992, 6,289,308, 5,610,985, 5,481,643, 5,544,247, 5,960,037, 6,023,490, 5,878,080,
and under US Published PatentApplication No. 2001-44713-A1.
This license is limited to private non-commercial use byend-user consumers for licensed contents. No rights are granted for
commercial use. The license does not cover any product unit other than this product unit and the license does not extend to
any unlicensed product unit or process conforming to ISO/IEC 11172-3or ISO/IEC 13818-3 used or sold in combination with
this product unit. The license only covers the use of this product unit to encode and/or decode audio files conforming to the
ISO/IEC 11172-3or ISO/IEC 13818-3. No rights are granted under this license for product features or functions that do not
conform to the ISO/IEC 11172-3or ISO/IEC 13818-3.
•Other countries
The product unit accompanying this user manual is licensed under certain intellectual property rights of certain third parties.
This license is limited to private non-commercial use byend-user consumers for licensed contents. No rights are granted for
commercial use. The license does not cover any product unit other than this product unit and the license does not extend to
any unlicensed product unit or process conforming to ISO/IEC 11172-3or ISO/IEC 13818-3 used or sold in combination with
this product unit. The license only covers the use of this product unit to encode and/or decode audio files conforming to the
ISO/IEC 11172-3or ISO/IEC 13818-3. No rights are granted under this license for product features or functions that do not
conform to the ISO/IEC 11172-3or ISO/IEC 13818-3.
• SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT
Subject to the requirements, conditions, exclusions and limitations of the original Limited Warranty supplied with Samsung
Electronics (SAMSUNG) products, and the requirements, conditions, exclusions and limitations contained herein, SAMSUNG
will additionally provide Warranty Repair Service in the United States on SAMSUNG products purchased in Canada, and
in Canada on SAMSUNG products purchased in the United States, for the warranty period originally specified, and to the
Original Purchaser only.
The above described warranty repairs must be performed by a SAMSUNG Authorized Service Center. Along with this
Statement, the Original Limited Warranty Statement and a dated Bill of Sale as Proof of Purchase must bepresented to the
Service Center. Transportation to and from the Service Center is the responsibility of the purchaser.
Conditions covered are limited only to manufacturing defects in material or workmanship, and only those encountered in
normal use of the product.
Excluded, but not limited to, are any originally specified provisions for, in-home or on-site services, minimum or maximum
repair times, exchanges or replacements, accessories, options, upgrades, or consumables.
For the location of a SAMSUNG Authorized Service Center, please call toll-free:
in the United States :1-800-8AMSUNG (t-800-72G7864)
in Canada : 1-800-SAMSUNG
[] Precautions When Displaying a Still image
A still image may cause permanent damage to the TV screen
• Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. This image
retention is also known as screen burn. Toavoid such image retention, reduce the degree of brightness and contrast ofthe
screen when displaying a still image.
• Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the
left, rightand center of the screen caused by the difference of light emission on the screen. Playing a DVD or
a game console may cause a similar effect to the screen. Damages caused by the above effect are not
covered by the Warranty.
• Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images. To
prevent this effect, reduce the 'brightness' and 'contrast' when displaying still images.
© 2009 Samsung Electronics Co., Ltd. All rights reserved.

CONTENTS
uMoviePlay Option Menu ............................................................. 54
! Usingthe Setup Menu .....................................................................55
[] List of Features..................................................................................2
! Accessories .......................................................................................2
•Viewing the Control Panel .................................................................3
,,,Viewingthe Remote Control..............................................................4 " Settingthe DLNANetwork............................................................. 56
[] {nstallingBatteriesin the Remote Control........................................ 5 ,_ installingthe DLNAApplication........................................................57
g Viewingthe menus .......................................................................... 5 " Usingthe DLNAApphcatlon.............................................................58
= Plug& Pla_ Feature...........................................................................7 ,,,Usingthe DLNA Function................................................................60
•,Connecting VHF and UHFAntennas.................................................8
! Connecting CaNeTV .........................................................................9
" Viewingthe Connection Panel.........................................................10
[] Channel Menu.............................................................................. 13
" Managing Channels.........................................................................14
! Configuring the Picture Menu ................................ 16
! ViewingPicture-in-Picture................................................................20
! UsingYour TV as a Computer (PC) Displa} ....................................2!
! Setting up the TV with your PC........................................................22
,,,Configuring the Sound Menu...........................................................23
! Configuring the Setup Menu ............................................................25
! Setting the Time...............................................................................28
! NetworkConnection ........................................................................30
! Setting the Network .........................................................................33
! Input Menu.......................................................................................36
" SupportMenu..................................................................................36
! Connecting a USB Device............................................................. 39
gMedia Pla_Function...................................................................... 40
mSortingthe Photo List.................................................................... 42
! Photo List Option Menu...................................................................43
"Viewing a Photo or Slide Show..................................................... 44
[] Slide ShowOption Menu.............................................................. 45
! Sortingthe Music List.................................................................... 47
,,,Music List Option Menu .................................................................. 48
" Playing Music................................................................................. 49
" Music Play option Menu ................................................................ 50
" Sortingthe Movie List......................................................................50
" MovieList Cption Menu.................................................................. 51
mEPlaying a Movie File ........................................................................5!
License
[] ConnectingAnynet+ Devices...........................................................61
" Setting UpAnynetT..........................................................................62
•, Switching betweenAnynet* Devices...............................................62
" Recording...................................................................................... 63
" Listeningthrough a Receiver (HomeTheater)................................ 63
" Troubleshootingfor Anynet_ ...........................................................64
" Usingthe Content Librar_................................................................65
" Usingthe TV Memorj Contents..................................................... 66
[] Usingthe Content Management......................................................67
,,,GettingStarted with ]ntemet@TV....................................................68
" EditingSnippets in the Dock........................................................ 71
" Usingthe Profile Widget ............................................................... 71
" Usingthe Yahoo!®Widget Gallery..................................................73
! Usingthe Yahoo!®Weather Widget ................................................74
= Usingthe Yahoo!® NewsWidget.....................................................74
!=Usingthe Yahoo!® FiickrWidget .....................................................75
= Usingthe Yahoo!® FinanceWioget.................................................76
,- Troubleshootingfor intemet@TV.....................................................76
,- HelpWebsite ...................................................................................76
,,=HomeNetworkCenter .....................................................................77
[] Setting Up the Home Network Center.............................................78
,,=Usingthe Message Function...........................................................79
! Usingthe Media Function................................................................80
,,,Troubleshooting............................................................................. 81
= Installingthe Stand..........................................................................82
" DisconnectingtheStand................................................................ 82
" Assembling the Cables................................................................... 83
" Wail Mount KitSpecifications (VESA'!.............................................83
,,,Anti-Theft Kensington Lock ........................................................... 84
g Securingthe Installation Space .......................................................84
,,,Securingthe TV to a Waltor Cabinet ..............................................85
[] Specifications .................................................................................86
,,,Dimensions......................................................................................88
$R$(O) TruSurround HD. SRS and (®) symbol are trademarks of SRS Labs. tnc. TruSurround HD
technology is _ncorporatedunder license from SRS Labs. Inc.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
DivX® Certifiea to play DivX® video, including premium content.
Symbol
Press Note One-Touch Button TOOL Button
EngHsh,_l

Touse your TV,you first have to set it upto suit your environment.
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.
Product design and specifications may be changed without notice in order to enhance product performance.
List of Features
• Adjustable picture settings that can be stored in the TV's memory.
• Automatic timer to turn the TV on and off.
• Aspecial sleep timer.
• Excellent Digital Interface & Networking : With a built-in HD digital tuner, nonsubscription HD broadcasts can beviewed with
no Cable Box/Satellite receiver (Set-Top Box) needed.
• HDMI/DVl connection of your PC to this TV.
• Excellent Picture Quality
• SRS TruSurround HD provides a virtual surround system.
• Media Play: Allows you to play music files, pictures, and movies saved on a USB or DLNAdevice.
• Internet@TV: You can use various internet services and view useful information and entertaining content.
• Home Network Center: Allows you to configure a mobile message server or a DLNA media render.
Accessories
Remote Control (BN59-00854A) Program CD (LN40B650: BN63-05286A)
& Batteries (_ x 2) (BN59-00726D) (LN46B650: BN63,05287A)
(LN55B650: BN63-05478A)
(M4xL16)
warranty card/ Sl_dS_)[:)_x_)Power Cord
Safety Guide _ - _ / (3903-000144)
LN40B650, LN46B650
(M4xL16)
TV,Holder& screw (xi) ............. c ean n C01h ............... Holder,wire Cable
(BN96.10788A) _BN63 _g_98B\ (BN61*05596A)
(Depending onthe model) _ ' _ (Depending on the model)
Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.
The items color and shape may vary depending onthe model.

Viewing the Control Panel
The product color and shape may vary depending on the model.
The front panel buttons can beactivated by touching them with your finger.
O d) (POWER): Press to turn the TV on and off.
POWER INDICATOR: Blinks and turns offwhen the power is on and lights up in stand-by mode.
O V CH A: Press to change channels. Inthe on-screen menu, use the V CH A buttons as you would use the T and A
buttons on the remote control.
O --VOL+: Press to increase or decrease the volume. In the on-screen menu, use the --VOL+ buttons as you would use the
_,iand 1_buttons onthe remote control.
O MENU: Press to see an on-screen menu of your TV's features.
O SOURCE C#: Toggles between all the available input sources. In the on-screen menu, use this button as you use the
ENTER[E_ button on the remote control.
O REMOTE CONTROL SENSOR: Aim the remote control towards this spot onthe TV.
O SPEAKERS

Viewing the Remote Control
You can use the remote control up to a distance of about 23 feet from the TV.
The performance of the remote control may be affected by bright light.
The product color and shape may vary depending on the model.
O POWER : Turns the TV on and
off.
TV : Selects the TV mode
directly.
O NUMERIC BUTTONS :Press to
change the channel.
[_]: Press to select additional
channels (digital) being
broadcast by the same station.
For example, to select channel
'54-3', press '54', then press '[_]'
and '3'.
--VOL+ :Press to increase or
decrease the volume.
O SOURCE: Press to display
and select the available video
sources.
OH LIST : Used to display
Channel Lists on the screen.
O TOOLS : Use to quickly select
frequently used functions.
O INTERNET@ : Press to use
various internet services to
view useful information and
entertaining content.
_) COLOR BUTTONS : Use these
buttons in the Channel list,
Internet@TV, Media Play menu,
etc.
MEDIA.P: Allows you to play
music files, pictures, and movies.
1_ INFO: Press to display
information onthe TV screen.
t_ MTS: Press to choose stereo,
mono or Separate Audio Program
(SAP broadcast).
Use these buttons in the Media
Play andAnynet + modes. ([][]:
This remote can beused to
control recording on Samsung
recorders with the Anynet +
feature)
ON/OFF _: Pressing the
ONIOFF F_q light button toggles
between on and off.When the
remote control is on, and a button
is pressed on the remote control,
the remote control buttons will
be litfor a moment. (Using the
remote control with the ON/OFF
light button set to On will
reduce the battery usage time.)
PRE=CH: Enables you to return
to the previous channel you were
watching.
_iJ MUTE _ : Press to temporarily
cut off the sound.
_) v CH A :Press to change
channels.
_) MENU : Displays the main on-
screen menu.
I_ FAV.CH: Press to switch to your
favorite channels.
RETURN : Returns to the
previous menu
_) UPA 1DOWNY/LEFT_ 1
RtGHT_. /ENTER _',J: Use to
select on-screen menu itemsand
change menu values.
EXIT : Press to exit the menu.
_) CONTENT: This function enables
you to view the Content Library.
Q P,SIZE: Picture size selection.
CO: Controls the caption
decoder.
@--
@-
._

Installing Batteries in the Remote Control
1,
2.
3,
Lift the cover at the back of the remote control upward as shown in the figure.
Install two AAA size batteries.
Make sure to match the '+' and '-' ends of the batteries with the diagram inside
the compartment.
Replace the cover.
Remove the batteries and store them in a cool, dry place if you won't be using the
remote control for a long time. (Assuming typical TV usage, the batteries should
last for about one year.)
If the remote control doesn't work, check the following:
- Is the TV power on?
- Are the plus and minus ends of the batteries reversed?
- Are the batteries drained?
- Is there a power outage or isthe power cord unplugged?
- Is there a special fluorescent light or neon sign nearby?
Viewing the menus
Before using the TV,follow the steps below to learn how to navigate the menu in order to select and adjust different functions.
MENUButton I v_-°_ _L_ I
Display the main on-screen menu. @__ I
'_, _ RETURN Button
ENTER_,_/DIRECTION Button- ___ I Return to the previous menu.
Move the cursor and select an item. Select
the currently selected item. Confirm the
........_ Exitthe on-screen menu.
[] Operation the OSD (On Screen Display)
The access step may differdepending on the selected menu.
1. Press the MENU button.
2. The main menu appears on the screen. The menu's left side has icons • Picture, Sound,
Channel, Setup, input, Application, Support.
3. Press the A. or T button to select one of the icons.

4. ThenpresstheENTERIB_buttontoaccesstheicon'ssub-menu.
6. PresstheAorTbuttontoselecttheicon'ssubmenu.
6. Press the _ or _. button to decrease or increase the value of a particular item. The
adjustment OSD may differ depending on the selected menu.
7. Press the ENTER _ button to complete the configuration. Press the EXtTbutton to exit.
Help icon

Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and subsequently.
1. Press the POWER (b button onthe remote control.
You can also use the POWER O button on the TV.
The message Select Language of the OSD. is displayed.
2. Press the ENTERIB,_ button. Press the A or T button to select the language, then press
the ENTERIB,_ button. The message Select 'Home Use' when installing this TV in
your home. is displayed.
3. Press the _ or _. button to select Store Demo or Home Use, then press the ENTER_,_
button. The message Select the Antenna source to memorize, is displayed.
We recommend setting the TV to Home Use mode for the best picture in your home
environment.
Stere Dome mode is only intended for use in retail environments.
If the unit is accidentally set to Store Demo mode andyou want to return to Home Use (Standard): Press the volume
button on the TV.When the volume OSD is displayed, press and hold the MENU button on the TV for 5 seconds.
4. Press the A or T button to memorize the channels of the selected connection. Press the ENTER_ button to select Start.
Air: Air antenna signal. /Cable: Cable antenna signal. /Auto: Air and Cable antenna signals.
In Cable mode, you can select the correct signal source among 8TD, HRC, and IRC by pressing the A., T, 4 or I_
button, then press the ENTERIB,# button. If you have Digital cable, select the cable system signal source for both Analog
and Digital. Contact your local cable company to identify the type ofcable system that exists in your particular area.
6. Press the ENTERIB,# button to select Start. The TV will begin memorizing all of the available channels.
To stop the search before it has finished, press the ENTERIB,# button with Stop selected.
After all the available channels are stored, it starts to remove scrambled channels. The Auto program menu then
reappears. Press the ENTER _,_ button when channel memorization is complete. The message Set the Clock Mode. is
displayed.
6. Press the ENTERIB,# button. Press the A or T button to select Auto, then Press the ENTERIB,_ button. The message Set to
daylight saving time. is displayed. If you select Manual, Set current date and time, is displayed.
7. Press the A or T button to select Off, On or Auto, then press the ENTER _ button.
8. Press the A or _' button to highlight the time zone for your localarea. Press the ENTERIB# button. If you have received a
digital signal, the time will be set automatically. Ifnot, refer to the 'Setting the Time' instructions to set the clock.
(see page 28)
9. The description for the connection method providing the best HD screen quality is displayed. Check the description and press
the ENTERIB# button.
10. Press the _ or _ button to select See Product Guide or Watch TV. Press the ENTERIB_ button.
• See Product Guide: You are moved to the Product Guide where you can view the introduction to the main functions of
your new HDTV.
• Watch TV: You can watch the memorized channels.
If you want to reset this feature...
1. Press the MENU button to display the menu. Press the A or T button to select Setup,
then press the ENTER _ button.
2. Press the ENTERIB# button again to select Plug &Play.
The Plug &Play feature is only available in the TV mode.

Connecting VHF and UHF Antennas
If your antenna has a set of leads that look like the diagram to the right, see 'Antennas with 300
O Flat Twin Leads' below.
If your antenna has one lead that looks like the diagram to the right, see 'Antennas with 75 O
Round Leads'.
If you have two antennas, see 'Separate VHF and UHF Antennas'.
Antennaswith 300QFlatTwinLeads
If you are using an off-air antenna (such as a roof antenna or 'rabbit ears') that has 3000 twin
flat leads, follow the directions below.
1. Place the wires from the twin leads under the screws on a 300-75 O adapter (not
supplied). Use a screwdriver to tighten the screws.
2. Plug the adaptor into the ANT IN terminal on the back of the TV.
Antennaswith 75Q RoundLeads
PlugtheantennaleadintotheANTINterminalonthebackoftheTV.
Separate VHF and UHF Antennas
If you have two separate antennas for your TV (one VHF and one UHF), you must combine
the two antenna signals before connecting the antennas to the TV.This procedure requires an
optional combiner-adaptor (available at most electronics shops).
1. Connect both antenna leads to the combiner.
2. Plug the combiner into the ANT INterminal on the bottom of the rear panel.

Connecting Cable TV
Toconnect to a cableTV system, follow the instructions below.
Cablewithout aCableBox
Plug the incoming cable into the ANT IN terminal on the back ofthe TV.
Because this TV is cable-ready, you do not need a cable box to view unscrambled cable
channels.
Connecting to a Cable Box that Deserambles All Channels
1. Find the cable that is connected to the ANT OUT terminal on your cable box.
This terminal might be labeled 'ANT OUT', 'VHF OUT' or simply, 'OUT'. ANTIN
2. Connect the other end of this cable to the ANT INterminal on the back of the TV.
Connecting to a Cable Box that Deserambles Some Channels
If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need atwo-
way splitter, an RF (A/B) switch and four lengths of RF cable. (These items are available at most electronics stores.)
_m /J
Incoming cable I CA_E
Cabb Box
RF{NB) Switch
1. Find and disconnect the cable that is connected to theANT IN terminal onyour cable box.
This terminal might be labeled 'ANT IN', 'VHF IN' or simply, 'IN'.
2. Connect this cable to a two-way splitter.
3. Connect an RF cable between the OUTPUT terminal on the splitter and the IN terminal on the cable box.
4. Connect an RF cable between theANT OUT terminal on the cable box and the B-IN terminal onthe RF(A/B) switch.
6. Connect another cable between the other OUT terminal onthe splitter and the A-IN terminal on the RF (A/B) switch.
6. Connect the last RF cable between the OUT terminal onthe RF (A/B) switch and the ANT INterminal on the rear of the TV.
After you have madethis connection, set theA/B switch to the 'A' position for normal viewing. Setthe A/B switch to the 'B'
position to view scrambled channels. (When you set the A/B switch to 'B', you will need to tune your TV to the cable box's
output channel, which is usually channel 3 or 4.)

Viewing the Connection Panel
The product color and shape may vary depending on the model.
Rear Panel
Cable Television
Network
OPOWER INPUT
Connects the supplied power cord,
The location of the POWER INPUT may be different depending on its model.
HDMI iN I(DVI), 2, 31DVt AUDIO iN [R-AUDIO-L]
Connects to the HDMIjack of a device with an HDMI output.
No sound connection is needed for an HDMIto HDMI connection.
What is HDMI?
- HDMl(High-Definition Multimedia Interface), is an interface that enables the transmission of digital audio and video
signals using a single cable.
- The difference between HDMI and DVl is that the HDMI device is smaller insize and has the HDCP (High Bandwidth
Digital Copy Protection) coding feature installed.
The TV may not output sound and pictures may be displayed with abnormal color when DVD /Blu-ray player /Cable Box /
Satellite receiver (Set-Top Box) supporting HDMI versions older than 1.3are connected. When connecting an older HDMI
cable and there is no sound, connect the HDMI cable to the HDMI IN I(DVl) jack and the audio cables to the DVl AUDIO
IN JR-AUDIO-L] jacks on the back of the TV. Ifthis happens, contact the company that provided the DVD/Blu-ray player /
Cable Box /Satellite receiver (Set-Top Box) to confirm the HDMI version, then request an upgrade.
HDMI cables that are not 1.3 may cause annoying flicker or no screen display.
Use the HDMI IN I(DVl)jack for DVl connection to an external device. Use a DVl to HDMI cable or DVI-HDMI adapter
(DVl to HDMI) for video connection andthe DVl AUDIO IN [R-AUDIO-L] jacks for audio. When using an HDMI /DVl cable
connection, you must use the HDMI IN I(DVl)jack.
O ANT iN
Connects to an antenna or cable TV system.

1
or
L
O KENSINGTON LOCK
The Kensington Lock (optional) is a device used to physically fix the system when used in a public place. If you want to use a
locking device, contact the dealer where you purchased the TV.
The location of the Kensington Lock may be different depending on its model.
OCOMPONENT IN 1, 2/AV IN 1
Connects Component video /audio.
The COMPONENT IN 1jack is also used as theAV iN 1jack.
Connect the video cable to the COMPONENT iN 1 [YNIDEO] jack and the audio cable to the COMPONENT iN 1 [R-
AUDIO-L] jacks.
If you have a 'mono' (non-stereo) VCR, use a Y-connector (not supplied) to connect to the right and left audio inputjacks
of the TV.Alternatively, connect the cable to the 'R' jack. If your VCR is stereo, you must connect two cables.
When connecting toAV iN 1,the color of the AV iN 1 [Y/VIDEO] jack (Green) does not match the color of the video cable
(Yellow).
OPC iN [PC] /(AUDIO)
Connects to the video andaudio output jacks on your PC.
If your PC supports an HDMI connection, you can connect this to the HDMmiN I(DVl), 2, 3or 4 terminal.
If your PC supports a DVI connection, you can connect this to the HDMmiN I(DVm)/DVmAUDIO IN JR-AUDIO-L] terminal.
DIGITAL AUDIO OUT (OPTICAL)
Connects to a Digital Audio component such as a Home theater receiver.
When a DigitalAudio System is connected to the DiGiTAL AUDIO OUT (OPTICAL) jack: Decrease the volume of the TV
and adjust the volume level with the system's volume control.
5.1CH audio is possible when the TV is connected to an external device supporting 5.1CH.
When the Home Theater receiver is set to On, you can hear sound output from the TV's Opticaljack. When the TV is
displaying a DTV(air) signal, the TV will send out 5.1 channel sound to the Home theater receiver. When the source is a
digital component such as a DVD /Blu-ray player /Cable Box /Satellite receiver (Set-Top Box) and is connected to the
TV via HDMI, only 2 channel sound will be heard from the Home Theater receiver. If you want to hear 5.1 channel audio,
connect the digital audio outjack on DVD/Blu-ray player /Cable Box /Satellite receiver (Set-Top Box) directly to an
Amplifier or HomeTheater, not the TV.

O EX-LINK
Connectorforserviceonly.
O AUDIOOUT
Connectstotheaudio input jacks on yourAmplifier/Home theater.
When an audio amplifier is connected to the AUDIO OUT JR-AUDIO-L] jacks: Decrease the volume of the TV and adjust
the volume level with theAmplifier's volume control.
@ LAN
Connecta LAN cabletothisporttoconnecttotheNetwork.
Side Panel
For devices frequently connected/disconnected from your TV, it is convenient to use the jacks on the side of your TV (e.g.
Camcorder).
@
O;_,iiiiii_i,!_i,!!,_!i!!i!i!ii!i!i!iiiiii!i!ii_'i' i!i!ii!iiiii!ii!ilii i i i'i i i i
o o
0 0
O USBI(HDD)/USB2
Connector for software upgrades and Media Play, etc. You can connect to Samsung's network wirelessly using the 'Samsung
Wireless LAN Adapter' (Sold separately).
For USB HDD, use the USBI(HDD) port.
0 HDMI IN 4
Connect to the HDMIjack of a device with HDMI output.
OAV IN2 [VIDEO] /[R-AUDIO-L]
Video and audio inputs for external devices, such as a camcorderorVCR.

YoucanconfigurevarioussettingsforyourTVchannelswithfeaturessuchasAutoProgram,FavoriteChannels,andSignal
Strength.
Channel Menu
[]
[]
[]
[]
[]
Antenna -_ Air /Cable
Before your television can begin memorizing the available channels, you must specify the type
of signal source that is connected to theTV (i.e. anAir or a Cable system).
__ Press the TOOLS button to display the Tools menu. You can also set the Antenna by
selecting Tools _ Switch to Cable (or Switch to Air).
Auto Program
Air: Air antenna signal, /Cable: Cable antenna signal. /Auto: Air and Cable antenna
signals
When selecting the Cable TV system: Selects the cable system. STD, HRC and IRC identify various types of cable TV
systems. Contact your local cable company to identify the type of cable system that exists in your particular area.At this point
the signal source has been selected.
After all the available channels are stored, it starts to remove scrambled channels (Removing scrambled channel). The Auto
program menu then reappears.
If you want to stop Auto Programming, press the ENTERIB,_ button. The Stop Auto Program? message will be displayed.
Select Yes by pressing the 4 or _ button, then press the ENTERC_ button.
Clear Scrambled Channel (digital channels only)
This function is used to filter out scrambled channels after Auto Program is completed. This process may take upto 20--30
minutes.
Tostop searching scrambled channels: Press the ENTER _ button to select Stop. Press the 4 button to select Yes, then
press the ENTERIB,_ button.
This function is only available in Cable mode.
Channel List
For detailed procedures on using the Channel List, refer to the 'Managing Channels' instructions. (seepages 14~15)
You can select these options by simply pressing the CH LIST button on the remote control.
Fine Tune (analog channels only)
Use fine tuning to manually adjust a particular channel for optimal reception.
If you do not storethe fine-tuned channel inmemory, adjustments are not saved.
'*' will appear next tothe name offine-tuned channels.
To resetthe fine tuning setting, press the T button to select Reset, then press the ENTER _,_ button.

Managing Channels
Using this menu, you can add /delete or set favorite channels and use the program guide for
digital broadcasts.
All Channels
Shows all currently available channels.
Added Channels
Shows all added channels.
Favorite
Shows all favorite channels.
Toselect the favorite channels you have set up, press the FAV.CHbutton on the remote control.
Programmed
Shows all current reserved programs.
Select a channel in the All Channels, Added Channels or Favorite screen by pressing the ,&/ Vbuttons, and pressing the
ENTERIB,,Jbutton. Then you can watch the selected channel.
Using the color buttons with the Channel List
Red (Antenna): Switches to Air or Cable.
Green (Zoom): Enlarges or shrinks a channel number.
Yellow (Select): Selects multiple channel lists. You can perform the add/delete or add to Favorite/delete from Favorite
function for multiple channels at the same time. Select the required channels and press the yellow button to set all the
selected channels at the same time. The ..,/ mark appears to the left of the selected channels.
TOOLS (Tools): Displays the Add (or Delete), Add to Favorite (or Delete from Favorite), Timer Viewing, Channel
Name Edit, Select All (or Deseleet All) and Auto Program menus (The Options menus may differ depending on the
situation.)
Channel Status Display Icons
_/ :A channel selected by pressing the yellow button.
:A program currently being broadcast.
V :A channel set as a Favorite.
(_) :Areserved program.
Channel List Option Menu (in All Channels /Added Channels /Favorite)
Press the TOOLS button to use the option menu.
Option menu items may differ depending on the channel status.
Add /Delete
You can delete or add a channel to display the channels you want.
All deleted channels will beshown on the All Channels menu.
Agray-colored channel indicates the channel has been deleted.
The Add menu only appears for deleted channels.
You can also delete a channel from the Added Channels or Favorite menu in the same
manner.

AddtoFavorite /Delete from Favorite
You can set channels you watch frequently as Favorite.
_-_ Press the TOOLS button to display the Tools menu. You can also set the add to (or delete from) Favorites by selecting Tools
Add to Favorite (or Delete from Favorite).
The 'V' symbol will be displayed and the channel will be set as a favorite.
All favorite channels will be shown on Favorite menu.
Timer Viewing
If you reserve a program you want to watch, the channel is automatically switched to the reserved channel in the Channel List;
even when you are watching another channel. To reserve a program, set the current time first.
Only memorized channels can be reserved.
You can set the channel, day, month, year, hour and minute directly by pressing the number buttons on the remote control.
Reserving a program will be shown in the Programmed menu.
Digital Program Guide andViewing Reservation
When a digital channel is selected, and you press the _ button, the Program Guide for the channel appears. You can reserve
a program according to the procedures described above.
Channel Name Edit (analog channels only)
Channels can labeled so thattheir callletters appear whenever the channel is selected.
@ The names of digital broadcasting channels are automatically assigned and cannot be labeled.
Select All IDeselect All
= Select All: You can select allthe channels in the channel list.
• Deselect Alt: Youcan deselect all the selected channels.
You can only select Deselect All when there is a selected channel.
Auto Program
For detailed procedures on using the Auto Program, refer to the 'Channel Menu' instructions. (see page 13)
Channel List Option Menu (in Programmed)
You can view, modify or delete a reservation.
Press the TOOLS button to use the option menu.
Change Info
Select to change a viewing reservation.
Cancel Schedules
Select to cancel a viewing reservation.
information
Select to view a viewing reservation.
(Youcan also change the reservation information.)
Select All
Select all reserved programs.

Youcanconfigurevariouspictureoptionssuchasthepicturemode,aspectratio,andcolortosuityourpersonalpreferences.
Configuring the Picture Menu
[] Mode
You can select the type of picture which best corresponds to your viewing requirements.
_-_ Press the TOOLS button to display the Tools menu. You can also set the picture mode by
selecting Tools _Picture Mode.
Dynamic
Selects the picture for increased definition in a bright room.
Standard
Selects the picture for the optimum display in a normal environment.
Natural
Selects the picture for an optimum and eye-comfortable display.
Natural is not available in PC mode.
Movie
Selects the picture for viewing movies in a dark room.
[]
[]
Backlight /Contrast /Brightness /Sharpness /Color /Tint(G/R)
Yourtelevision has several setting options that allow you to control the picture quality.
• Backlight: Adjusts the brightness of LCD back light.
•Contrast: Adjusts the contrast level of the picture.
• Brightness: Adjusts the brightness level of the picture
• Sharpness: Adjusts the edge definition of the picture.
• Color: Adjusts color saturation of the picture.
• Tint(G/R): Adjusts the color tint of the picture.
When you make changes to Backlight, Contrast, Brightness, Sharpness, Color or Tint(GIR) the OSD will be adjusted
accordingly.
In PC mode, you can only make changes to Backlight, Contrast and Brightness.
Settings can beadjusted and stored for each external device you have connected to an input of the TV.
The energy consumed during use can be significantly reduced ifthe brightness level ofthe picture is lowered, which will
reduce the overall running cost.
Advanced Settings
Samsung's new TVs allow you to make even more precise picture settings than previous
models.
Advanced Settings is available in Standard or Movie mode.
In PC mode, you can only make changes to Dynamic Contrast, Gamma and White
Balance from among the Advanced Settings items.
Black Tone -_ Off /Dark /Darker /Darkest
You can select the black level on the screen to adjust the screen depth.

DynamicContrast _ Off /Low /Medium /High
You can adjust the screen contrast so that the optimal contrast is provided.
Gamma
You can adjust the primary color (red, green, blue) intensity.
Color Space
Color space is a color matrix composed of red, green and blue colors. Select your favorite color space to experience the most
natural color.
• Auto: Auto color space automatically adjusts to the most natural color tone based on program sources.
• Native: Native color space offers deep and rich color tone.
• Custom: Adjusts the color range to suit your preference.
Changing the adjustment value will refresh the adjusted screen.
Settings can be adjusted and stored for each external device you have connected to an input of the TV. For example, if
you have a DVD player connected to HDMI 1 and it is currently selected, settings and adjustments will be saved for the
DVD player.
- Color: Red, Green, Blue, Yellow, Cyan or Magenta
Color is available when Color Space is set to Custom.
InColor, you can adjust the RGB values for the selected color.
To reset the adjusted RGB value, select Reset.
- Red: Adjusts the red saturation level of the selected color.
-Green: Adjusts the green saturation level of the selected color.
- Blue: Adjusts the blue saturation level of the selected color.
- Reset: Resets the color space to the default values.
White Balance
You can adjust the color temperature for more natural picture colors.
• R-Offset: Adjusts the red color darkness.
•G-Offset:Adjusts the green color darkness.
• B-Offset: Adjusts the blue color darkness.
• R-Gain: Adjusts the red color brightness.
• G-Gain:Adjusts the green color brightness.
• B-Gain: Adjusts the blue color brightness.
• Reset: The previously adjusted white balance will be reset to the factory defaults.
Flesh Tone
You can emphasize the pink 'flesh tone' in the picture.
Changing the adjustment value will refresh the adjusted screen.
Edge Enhancement _ Off /On
You can emphasize object boundaries in the picture.
xvYCC -, Off /On
Setting the xvYCC mode to on increases detail and color space when watching movies from an external device (ie. DVD player)
connected to the HDMI or Component IN jacks.
xvYCC is available when the picture mode is set to Movie, and the external input is set to HDMI or Component mode.

[] Picture Options
In PC mode, you can only make changes to the Color Tone and Size from among the
items in Picture Options.
Color Tone _Cool /Normal 1Warm1 /Warm2 1Warm3
@ Warm1, Warm2 or Warm3 is only activated when the picture mode is Movie.
@ Settings can beadjusted and stored for each external device you have connected to an
input ofthe TV.
Size
Occasionally, you may want to change the size of the image on your screen. YourTV comes
with several screen size options, each designed to work best with specific types of video input. Yourcable box/satellite receiver
may have its own set of screen sizes as well. In general, though, you should view the TV in 16:9 mode as much as possible.
Alternately, you can press the P.SiZEbutton on the remote control repeatedly to change the picture size.
• 16:9 :Sets the picture to 16:9wide mode.
• Zoom1: Magnifies the size of the picture on the screen.
• Zoom2: Magnifies the size of the picture more than Zoom1.
• Wide Fit: Enlarges the aspect ratio of the picture to fit the entire screen.
• 4:3 :Sets the picture to 4:3 normal mode.
• Screen Fit: Use the function to see the full image without any cutoff when HDMI (720p/108Oi/108Op),Component
(1080i/I080p) or DTV (1080i) signals are input.
%
%
%
%
%
%
16:9 Zoom1 Zoom2
Wide Fit 4:3 Screen Fit
When Double ([_], H) mode has been set in PIP,the Picture Size cannot be set.
Temporary image retention may occur when viewing a static image on the set for more than two hours.
After selecting Zoom1, Zoom2 or Wide Fit: Press the _. button to Select Position, then press the ENTER[E# button. Press
the A or • button to move the picture up and down. Then press the ENTER[E_ button. Press the _- button to SelectSize,
then press the ENTER[E_ button. Press the A or T button to magnify or reduce the picture size inthe vertical direction. Then
press the ENTER_ button.
After selecting Screen Fit in HDMI (1O80i/1O8Op)or Component (1O80i/108Op)mode, you made need to center the picture:
Press the _ or _. button to select Position, then press the ENTER _ button. Press the A, T, 41or _. button to move the
picture.
Reset: Press the _ or _- button to select Reset, then press the ENTER[B_ button. Youcan initialize the setting.
HD (High Definition): 16:9 - 1O80i/1O8Op(1920xi080), 720p (1280x720)
Settings can beadjusted and stored for each external device you have connected to an input of the TV.
Input Source Picture Size
ATV,AV, Component (480i, 480p) 16:9, Zoornl, Zoom2, 4:3
DTV(1080i), Component (1080i, 1080p), 16:9, 4:3, Wide Fit, Screen Fit
HDMI (720p, 1080i, 1080p)
PC 16:9, 4:3