Samsung LN26A450C1D User manual

English-1
1-800-SAMSUNG (7267864)
Samsung Electronics America, Inc.
105 Challenger Road Ridgefield Park, NJ 07660-0511
Samsung Electronics Canada Inc., Customer Service
55 Standish Court Mississauga, Ontario L5R 4B2
Call center hours of operation (Mon-Sun 9AM-12AM EST).
To register this product please visit
www.samsung.com/global/register.
LN26A450C1D/LN32A450C1D/
LN37A450C1D/LN40A450C1D
Rear Panel / Side Panel Jacks (LN26A450C1D, LN40A450C1D)
1AUDIO OUT
2DIGITAL AUDIO OUT (OPTICAL)
3PC IN [PC] / [AUDIO]
4HDMI IN 1, 2, 3 / DVI IN (HDMI2)
[R-AUDIO-L]
5ANT IN
6AV IN 2
7HEADPHONE
8POWER INPUT
9SERVICE
0COMPONENT IN 1, 2 / AV IN 1
!EX-LINK
@KENSINGTON LOCK
BN68-01396A-Eng.indd 1 2008-02-02 �� 8:53:45

English-2
Audio Output Performance Comparison
OPTICAL (Digital)
AUDIO (Analog)
Best
Normal
Video Input Performance Comparison
HDMI/DVI
PC/COMPONENT
S-VIDEO
VIDEO
Best
Better
Good
Normal
/
/
Rear Panel / Side Panel Jacks (LN32A450C1D, LN37A450C1D)
1SERVICE
2DIGITAL AUDIO OUT (OPTICAL)
3PC IN [PC] / [AUDIO]
4AUDIO OUT
5COMPONENT IN 1, 2 / AV IN 1
6ANT IN
7HDMI IN 1, 2, 3 / DVI IN (HDMI1)
[R-AUDIO-L]
8EX-LINK
9KENSINGTON LOCK
0POWER INPUT
!AV IN 2
@HEADPHONE
BN68-01396A-Eng.indd 2 2008-02-02 �� 8:53:47

English-3
Remote Control
See “Remote Control” in the owner’s instructions for details.
1 POWER
Turns the TV on and off.
2 TV
Selects the TV mode directly.
3 NUMERIC BUTTONS
Press to change the channel.
4
Press to select additional
channels (digital and analog)
being broadcast by the same
station. For example, to select
channel “54-3”, press “54”, then
press “ ” and “3”.
5 (MUTE)
Press to temporarily cut off the
sound.
6 VOL-/ VOL+
Press to increase or decrease
the volume.
7 CH LIST
Used to display Channel Lists
on the screen.
8 TOOLS
Use to quickly select frequently
used functions.
9 INFO
Press to display information on
the TV screen.
0 COLOR BUTTONS
Use these buttons in the
Channel list, etc.
! SRS
Selects SRS TruSurround XT
mode.
@ E.MODE
Press to select the preset
display and sound modes for
sports, cinema and games.
# Use these buttons in the DMA
and Anynet+ modes.
( : This remote can be
used to control recording on
Samsung recorders with the
Anynet+ feature)
$ SOURCE
Press to display and select the
available video sources.
% PRE-CH
Tunes to the previous channel.
^ CH>/ CH<
Press to change channels.
& MENU
Displays the main on-screen
menu.
* CC
Controls the caption decoder.
( RETURN
Returns to the previous menu.
)  UP▲/DOWN▼/LEFT◄/
RIGHT►/ENTER
Use to select on-screen menu
items and change menu values.
a EXIT
Press to exit the menu.
b DMA (Digital Media Adapter)
Use this when connecting
a SAMSUNG DMA device
through an HDMI interface and
switching to DMA mode.
For more information on the
operating procedures, refer to
the user manual of the DMA.
This button is available when
"Anynet+(HDMI-CEC)" is "On".
c MTS
Press to choose stereo, mono
or Separate Audio Program
(SAP broadcast).
d FAV.CH
Press to switch to your favorite
channels.
e P.SIZE
Picture size selection.
BN68-01396A-Eng.indd 3 2008-02-02 �� 8:53:48

English-4
or
Connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box) via DVI
TV Rear Panel
1
DVI to HDMI Cable (Not supplied)
2Audio Cable (Not supplied)
1
Connect a DVI to HDMI Cable or
DVI-HDMI Adapter between the
HDMI IN 2 jack on the TV and the DVI
jack on the DVD Player or Cable Box/
Satellite receiver (Set-Top Box).
2
Connect Audio Cables between the
DVI IN (HDMI 2) [R-AUDIO-L] jack on
the TV and the DVD Player or Cable
Box/Satellite receiver (Set-Top Box).
Connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box) via HDMI
1
What is HDMI?
•
HDMI(High-Definition Multimedia
Interface), is an interface that enables the
transmission of digital audio and video
signals using a single cable.
• The difference between HDMI and DVI
is that the HDMI device is smaller in
size and has the HDCP (High Bandwidth
Digital Copy Protection) coding feature
installed.
Connect an HDMI Cable between
the HDMI IN (1, 2 or 3) jack on
the TV and the HDMI jack on the
DVD Player or Cable Box/Satellite
receiver (Set-Top Box).
DVD Player or Cable Box/
Satellite receiver (Set-Top Box)
Each DVD Player or Cable Box/Satellite receiver (Set-Top Box) has a different back panel configuration.
When connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box), match the color of the connection terminal to the
cable.
When using an HDMI/DVI cable connection, you must use the HDMI IN 2 jack.
➣
➣
➣
TV Side Panel
Each DVD Player or Cable Box/Satellite receiver (Set-Top Box) has a different back panel configuration. ➣
Connections (LN26A450C1D, LN40A450C1D)
TV Rear Panel
HDMI Cable (Not supplied)
1
DVD Player or Cable Box/
Satellite receiver (Set-Top Box)
BN68-01396A-Eng.indd 4 2008-02-02 �� 8:53:50

English-5
Connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box)
via Component cables
TV Rear Panel
1Component Cable
(Not supplied)
DVD Player or Cable Box /
Satellite receiver (Set-Top Box)
2Audio Cable (Not supplied)
1
Connect a Component Cable between
the COMPONENT IN (1 or 2)
[Y, P B , P R ] jacks on the TV and the
COMPONENT [Y, P B , P R ] jacks on
the DVD Player or Cable Box/Satellite
receiver (Set-Top Box).
2
Connect Audio Cables between the
COMPONENT IN(1 or 2) [R-AUDIO-L]
jacks on the TV and the AUDIO OUT
jacks on the DVD Player or Cable
Box/Satellite receiver (Set-Top Box).
Component video separates the video
into Y (Luminance (brightness)), Pb
(Blue) and Pr (Red) for enhanced video
quality.
Be sure to match the component video
and audio connections.
For example, if connecting
a Component video cable to
COMPONENT IN 1, connect the audio
cable to COMPONENT IN 1 also.
Each DVD Player or Cable Box/
Satellite receiver (Set-Top Box) has a
different back panel configuration.
When connecting a DVD Player or
Cable Box/Satellite receiver (Set-Top
Box), match the color of the connection
terminal to the cable.
➣
➣
➣
Connecting a Camcorder
1
Connect a Video Cable (or S-Video
Cable) between the AV IN 2 [VIDEO]
(or S-VIDEO) jack on the TV and the
VIDEO OUT jack on the camcorder.
2
Connect Audio Cables between the
AV IN 2 [R-AUDIO-L] jacks on the
TV and the AUDIO OUT jacks on the
camcorder.
Each Camcorder has a different back
panel configuration.
When connecting a Camcorder, match
the color of the connection terminal to
the cable.
➣
➣
or
TV Side Panel
2Audio cable
(Not supplied)
Camcoder 1
S-Video cable (Not supplied)
1
Video cable (Not supplied)
BN68-01396A-Eng.indd 5 2008-02-02 �� 8:53:53

English-6
Connecting a VCR
1
2
3
4
If you have a “mono” (non-stereo)
VCR, use a Y-connector (not
supplied) to hook up to the right
and left audio input jacks of the
TV. If your VCR is stereo, you
must connect two cables.
➣
Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape.
Each VCR has a different back panel configuration.
When connecting a VCR, match the color of the connection terminal to the cable.
When connecting to AV IN 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not match the color of the video cable
(Yellow).
➣
➣
➣
TV Rear Panel
3RF Cable
(Not supplied)
5Audio Cable (Not supplied)
VCR Rear Panel
4
Video Cable (Not supplied)
5
Connect the cable or antenna
to the ANT IN terminal on the
back of the VCR.
Connect an RF Cable between
the ANT OUT terminal on the
VCR and the ANT IN terminal
on the TV.
Connect a Video Cable
between the VIDEO OUT jack
on the VCR and the AV IN 1
[Y/VIDEO] or AV IN 2 [VIDEO]
jack on the TV.
Unplug the cable or antenna
from the back of the TV.
Connect Audio Cables between
the AUDIO OUT jacks on the
VCR and the AV IN 1 (or AV IN 2)
[R-AUDIO-L] jacks on the TV.
Video Connection
S-Video Connection
TV Rear Panel
3
S-Video Cable (Not supplied)
1RF Cable
(Not supplied)
VCR Rear Panel
1
2
Connect Audio Cables between
the AUDIO OUT jacks on the
VCR and the AV IN 2
[R-AUDIO-L] jacks on the TV.
3
Connect an S-Video Cable
between the S-VIDEO OUT jack
on the VCR and the AV IN 2
[S-VIDEO] jack on the TV.
To begin, follow steps 1–3 in
the previous section to connect
the antenna or cable to your
VCR and your TV.
An S-Video cable may be included
with a VCR. (If not, check your local
electronics store.)
Each VCR has a different back
panel configuration.
When connecting a VCR, match
the color of the connection
terminal to the cable.
➣
➣
2Audio Cable (Not supplied)
TV Side Panel
TV Side Panel
BN68-01396A-Eng.indd 6 2008-02-02 �� 8:53:56

English-7
Connecting a Digital Audio System
TV Rear Panel
1Optical Cable (Not supplied)
Digital Audio System
1
Connect an Optical Cable between
the “DIGITAL AUDIO OUT
(OPTICAL)” jacks on the TV and
the Digital Audio Input jacks on the
Digital Audio System.
When a Digital Audio System is
connected to the “DIGITAL AUDIO
OUT (OPTICAL)” jack: Decrease
the volume of the TV and adjust
the volume level with the system’s
volume control.
5.1CH audio is possible when the TV
is connected to an external device
supporting 5.1CH.
Each Digital Audio System has a
different back panel configuration.
When the receiver (home theater) is
set to On, you can hear sound output
from the TV’s Optical jack. When the TV
is displaying a DTV(air) signal, the TV
will send out 5.1 channel sound to the
Home theater receiver. When the source
is a digital component such as a DVD
and is connected to the TV via HDMI,
only 2 channel sound will be heard from
the Home Theater receiver. If you want
to hear 5.1 channel audio, connect the
DIGITALAUDIO OUT (OPTICAL) jack
on the DVD player or Cable/Satellite
Box directly to an Amplifier or Home
Theater, not the TV.
➣
➣
➣
Connecting an Amplifier/DVD Home Theater
TV Rear Panel
1Audio Cable (Not supplied)
Amplifier/DVD Home Theater
1
Connect Audio Cables between the
AUDIO OUT [R-AUDIO-L] jacks on
the TV and AUDIO IN [R-AUDIO-L]
jacks on the Amplifier/DVD Home
Theater.
When an audio amplifier is
connected to the "AUDIO OUT
[R-AUDIO-L]" jacks: Decrease the
volume of the TV and adjust the
volume level with the Amplifier’s
volume control.
Each Amplifier/DVD Home Theater has
a different back panel configuration.
When connecting an Amplifier/DVD
Home Theater, match the color of the
connection terminal to the cable.
➣
➣
BN68-01396A-Eng.indd 7 2008-02-02 �� 8:53:58

English-8
Connecting a PC
TV Rear Panel
1D-Sub Cable (Not supplied)
2PC Audio Cable (Not supplied)
PC
1
Connect a D-Sub Cable between
PC IN [PC] connector on the TV
and the PC output connector on
your computer.
2
Connect a PC Audio Cable
between the PC IN [AUDIO] jack
on the TV and the Audio Out jack of
the sound card on your computer.
Each PC has a different back panel
configuration.
When connecting a PC, match the
color of the connection terminal to the
cable.
When using an HDMI/DVI cable
connection, you must use the HDMI
IN 2 jack.
➣
➣
➣
Using the D-Sub Cable
1
Connect an HDMI/DVI cable between
the HDMI IN 2 jack on the TV and
the PC output jack on your computer.
2
Connect a 3.5 mm Stereo mini-
plug/2RCA Cable between the DVI
IN(HDMI2) [R-AUDIO-L] jack on the
TV and the Audio Out jack of the
sound card on your computer.
Using the HDMI/DVI Cable
TV Rear Panel
PC
1HDMI/DVI Cable (Not supplied)
2
3.5 mm Stereo mini-plug/2RCA Cable (Not supplied)
BN68-01396A-Eng.indd 8 2008-02-02 �� 8:54:02

English-9
or
Connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box) via DVI
TV Rear Panel
1
DVI to HDMI Cable (Not supplied)
2Audio Cable (Not supplied)
1
Connect a DVI to HDMI Cable or
DVI-HDMI Adapter between the HDMI
IN 1 jack on the TV and the DVI jack
on the DVD Player or Cable Box/
Satellite receiver (Set-Top Box).
2
Connect Audio Cables between the
DVI IN (HDMI 1) [R-AUDIO-L] jack on
the TV and the DVD Player or Cable
Box/Satellite receiver (Set-Top Box).
Connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box) via HDMI
1
What is HDMI?
•
HDMI(High-Definition Multimedia
Interface), is an interface that enables the
transmission of digital audio and video
signals using a single cable.
• The difference between HDMI and DVI
is that the HDMI device is smaller in
size and has the HDCP (High Bandwidth
Digital Copy Protection) coding feature
installed.
Connect an HDMI Cable between
the HDMI IN (1, 2 or 3) jack on
the TV and the HDMI jack on the
DVD Player or Cable Box/Satellite
receiver (Set-Top Box).
DVD Player or Cable Box/
Satellite receiver (Set-Top Box)
Each DVD Player or Cable Box/Satellite receiver (Set-Top Box) has a different back panel configuration.
When connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box), match the color of the connection terminal to the
cable.
When using an HDMI/DVI cable connection, you must use the HDMI IN 1 jack.
➣
➣
➣
Each DVD Player or Cable Box/Satellite receiver (Set-Top Box) has a different back panel configuration. ➣
Connections (LN32A450C1D, LN37A450C1D)
TV Rear Panel
TV Side Panel
HDMI Cable (Not supplied)
1
DVD Player or Cable Box/
Satellite receiver (Set-Top Box)
BN68-01396A-Eng.indd 9 2008-02-02 �� 8:54:05

English-10
or
Connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box)
via Component cables
TV Rear Panel
1Component Cable
(Not supplied)
DVD Player or Cable Box /
Satellite receiver (Set-Top Box)
2Audio Cable (Not supplied)
1
Connect a Component Cable
between the COMPONENT IN (1 or
2) [Y, PB, PR] jacks on the TV and the
COMPONENT [Y, PB, PR] jacks on
the DVD Player or Cable Box/Satellite
receiver (Set-Top Box).
2
Connect Audio Cables between the
COMPONENT IN(1 or 2) [R-AUDIO-L]
jacks on the TV and the AUDIO OUT
jacks on the DVD Player or Cable Box/
Satellite receiver (Set-Top Box).
Component video separates the video
into Y (Luminance (brightness)), Pb
(Blue) and Pr (Red) for enhanced
video quality. Be sure to match
the component video and audio
connections.
For example, if connecting
a Component video cable to
COMPONENT IN 1, connect the audio
cable to COMPONENT IN 1 also.
Each DVD Player or Cable Box/
Satellite receiver (Set-Top Box) has a
different back panel configuration.
When connecting a DVD Player or
Cable Box/Satellite receiver (Set-Top
Box), match the color of the connection
terminal to the cable.
➣
➣
➣
Connecting a Camcorder
1
Connect a Video Cable (or S-Video
Cable) between the AV IN2 [VIDEO]
(or S-VIDEO) jack on the TV and the
VIDEO OUT jack on the camcorder.
2
Connect Audio Cables between the
AV IN2 [R-AUDIO-L] jacks on the TV
and the AUDIO OUT jacks on the
camcorder.
Each Camcorder has a different back
panel configuration.
When connecting a Camcorder, match
the color of the connection terminal to
the cable.
➣
➣
TV Side Panel
2
Audio cable
(Not supplied)
Camcoder 1
S-Video cable (Not supplied)
1
Video cable (Not supplied)
BN68-01396A-Eng.indd 10 2008-02-02 �� 8:54:07