Samsung EC97 Series User manual

www.lg.com
P/NO : MFL68488302 (1412-REV03)
Printed in Korea
OWNER’S MANUAL
Please read this manual carefully before operating your set and retain it
for future reference.
*MFL68488302*
EC93**
EC97**
EC98**

TABLE OF CONTENTS
TABLE OF CONTENTS
A-3 SETTING UP THE TV
A-3 Detaching the stand
A-4 Assembling the AV cover
A-4 Tidying cables
A-6 MAKING CONNETIONS
A-6 Antenna Connection
A-8 Satellite dish Connection
A-8 HDMI Connection
A-14 - ARC (Audio Return Channel)
A-15 DVI to HDMI Connection
A-17 MHL Connection
A-20 Component Connection
A-21 Composite Connection
A-22 Headphone Connection
A-24 Audio Connection
A-24 - Digital optical audio connection
A-27 USB Connection
A-30 CI module Connection
A-32 Euro Scart Connection
LANGUAGE LIST
English
Deutsch
Français
Italiano
Español
Português
Nederlands
 Ελληνικά
 Slovenščina
LANGUAGE
COMMON
B-1 SPECIFICATIONS
COMMON
A-2

SETTING UP THE TV
(Only EC97**)
1
8 EA
M4 x L20
Back cover
2Back cover
CAUTION
yWhen detaching the stand to the TV set,
place the screen(or back) facing down on a
cushioned table or flat surface to protect the
screen(or back) from scratches.
yMake sure that the screws are inserted cor-
rectly and fastened securely. (If they are not
fastened securely enough, the TV may tilt
forward after being installed.)
Do not use too much force and over tighten
the screws; otherwise screw may be dam-
aged and not tighten correctly.
NOTE
yWhen you assemble the stand again,
performing the stand detaching in reverse.
SETTING UP THE TV
Image shown may differ from your TV.
Detaching the stand
(Only EC93**, EC98**)
1
(Only EC93**)
4 EA
M4 x L20
(Only EC98**)
8 EA
M4 x L20
Screen
2Screen
CAUTION
yWhen detaching the stand, make sure to hold it
firmly while removing the screws to stop it from
falling.
yWhen you assemble the stand again, have the
arrows on the bottom of the stand base looking
toward same direction to screen.
A-3

SETTING UP THE TV
Assembling the AV cover
Assemble the AV Cover as shown.
(Only EC93**)
AV Cover
(Only EC97**)
AV Cover
(Only EC98**)
AV Cover
Tidying cables
Image shown may differ from your TV.
Stand Type
(Only EC93**)
Gather and bind the cables with the cable holder.
Cable Holder
(Only EC97**)
1 Put the cable management in the hole of TV
back cover.
Cable
Management
2 EA
A-4

SETTING UP THE TV
2 Fix the cable management with cable management
screw.
M4 x L10
2 EA
NOTE
yWhen attaching the cable management, use
a magnetic screwdriver.
yIf you don’t have a magnetic screwdriver,
insert the screws into the cable management
and then attach it to the TV.
3 Gather and bind the cables with the cable holder.
Arrange the cable in the cable mangement.
Cable Management Cable Holder
(Only EC98**)
Gather and bind the cables with the cable holder.
Cable Holder
Wall Mount Type
(Only EC93**)
Cable Holder
CAUTION
yDo not move the TV by holding the cable
holder, as the cable holder may break, and
injuries and damage to the TV may occur.
A-5