Samsung QE49Q8 Series User manual

QLED TV
SERVICEManual
QLED TV Contents
1. Precautions
2. Product specications
3. Disassembly and Reassembly
4. Troubleshooting
5. Wiring Diagram
QTQ80D
Project : QTQ80D
Chassis : QWH00
Model : QE49Q8* / GQ49Q8*
QE55Q8* / GQ55Q8*
QE65Q8* / GQ65Q8*
QE75Q8* / GQ75Q8*
QE85Q8* / GQ85Q8*

Contents
1. Precautions....................................................................................................................... 1-1
1-1. Safety Precautions .......................................................................................................................1-1
1-1-1. Warnings.............................................................................................................................1-1
1-1-2. Servicing the LED TV ........................................................................................................1-1
1-1-3. Fire and Shock Hazard......................................................................................................1-1
1-1-4. Product Safety Notices.................................................................................................... 1-2
1-2. Servicing Precautions................................................................................................................. 1-3
1-2-1. General Servicing Precautions ...................................................................................... 1-3
1-3. Static Electricity Precautions .................................................................................................... 1-4
1-4. Installation Precautions............................................................................................................. 1-5
2. Product Specications .................................................................................................... 2-1
2-1. Product information.....................................................................................................................2-1
2-2. Product specication..................................................................................................................2-2
2-3. Accessories................................................................................................................................2-10
2-4. Supported Formats....................................................................................................................2-11
3. Disassembly and Reassemble........................................................................................ 3-1
3-1. Disassembly ................................................................................................................................. 3-1
4. Troubleshooting .............................................................................................................. 4-1
4-1. Function Control Operation Test............................................................................................... 4-1
4-2. Power............................................................................................................................................4-2
4-2-1. TV POWER STANDBY TEST.............................................................................................4-4
4-2-2. SMPS/PANEL BACKLIGHT TEST ...................................................................................4-4
4-3. Video .............................................................................................................................................4-5
4-3-1. Customer Picture Test.....................................................................................................4-5
4-3-2. TROUBLESHOOTING VIDEO PROBLEMS – TV MAIN/T-CON Models .................4-6
4-4. Audio.............................................................................................................................................4-9
4-5. Network......................................................................................................................................4-10
4-6. Smart Hub Connection Test ....................................................................................................4-13
4-7. Bluetooth / WiFi Module........................................................................................................... 4-15
4-8. Replacing Main Board..............................................................................................................4-16
4-9. Factory Mode .............................................................................................................................4-18
4-10. Factory Mode Adjustments ...................................................................................................4-24
4-10-1. Entering Factory Mode ...............................................................................................4-24
4-10-2. Factory Data.................................................................................................................4-26
4-11. RS-232C.....................................................................................................................................4-35
4-12. AV Control Tabe .......................................................................................................................4-36
4-13. Updating the TV’s Software...................................................................................................4-43

5. Wiring Diagram................................................................................................................ 5-1
5-1. Wiring Diagram.............................................................................................................................5-1
5-2. Connector.....................................................................................................................................5-4
5-2-1. Main Board........................................................................................................................5-4
5-2-2. LD/SMPS Board...............................................................................................................5-8

This Service Manual is a property of Samsung Electronics Co.,Ltd.
Any unauthorized use of Manual can be punished underapplicable
International and/or domestic law.
© 2020 Samsung Electronics Co.,Ltd.
All rights reserved.
Printed in Korea

1. Precautions
1-1. Safety Precautions
Follow these safety, servicing and ESD precautions to prevent damage and to protect against potential hazards such as
electrical shock.
1-1-1. Warnings
WARNING
Forcontinued safety, do not attempt to modify the circuit board.
Disconnect the AC power and DC power jack before servicing.
1-1-2. Servicing the LED TV
1. When servicing the LED TV, Disconnect the AC line cord from the AC outlet.
2. It is essential that service technicians have an accurate voltage meter available at all times. Check the calibration of
this meter periodically.
1-1-3. Fire and Shock Hazard
Before returning the monitorto the user, perform the following safety checks:
1. Inspect each lead dress to make certain that the leads are not pinched or that hardware is not lodged between the
chassis and other metal parts in the monitor.
2. Inspect all protective devices such as nonmetallic control knobs, insulating materials, cabinet backs, adjustment and
compartment covers orshields, isolation resistorcapacitornetworks, mechanical insulators, etc.
3. Leakage Current Hot Check:
DEVICE
UNDER
TEST
(READING SHOULD)
NOT BE ABOVE 0.5mA LEAKAGE
CURRENT
TESTER
TEST ALL EXPOSED
METAL SURFACES
2-WIRE CORD
ALSO TESTWITH PLUG
REVERSED (USING AC
ADAPTER PLUG AS
REQUIRED)
EARTH
GROUND
WARNING
Do not use an isolation transformer during this test.
Use a leakage current testeror a metering system that complies with American National Standards
Institute (ANSI C101.1, Leakage Current forAppliances), and Underwriters Laboratories (UL
Publication UL1410, 59.7).
4. With the unit completely reassembled, plug the AC line cord directly into a 120V AC outlet. With the unit’s AC switch
rst in the ON position and then OFF, measure the current between a known earth ground (metal water pipe, conduit,
etc.) and all exposed metal parts, including: metal cabinets, screwheads and control shafts.
The current measured should not exceed 0.5 milliamp.
Reverse the power-plug prongs in the AC outlet and repeat the test.
1-1
1. Precautions

1-2
1. Precautions
1-1-4. Product Safety Notices
Some electrical and mechanical parts have special safetyrelated characteristics which are often not evident from
visual inspection. The protection they give may not be obtained by replacing them with components rated for higher
voltage, wattage, etc. Parts that have special safety characteristics are identied by on schematics and parts lists.
A substitute replacement that does not have the same safety characteristics as the recommended replacement part
might create shock, re and/or other hazards. Product safety is under review continuously and new instructions are
issued whenever appropriate.

WARNING
An electrolytic capacitor installed with the wrong polarity might explode.
CAUTION
Before servicing units covered by this service manual, read and follow the Safety Precautions section of
this manual.
NOTE
If unforeseen circumstances create conict between the following servicing precautions and any of the
safety precautions, always follow the safety precautions.
1-2-1. General Servicing Precautions
1. Always unplug the unit’s AC power cord from the AC powersource and disconnect the DC PowerJack before attempting
to: (a) remove orreinstall any component or assembly, (b) disconnect PCB plugs or connectors, (c) connect a test
component in parallel with an electrolytic capacitor.
2. Some components are raised above the printed circuit board forsafety. An insulation tube ortape is sometimes used.
The internal wiring is sometimes clamped to prevent contact with thermally hot components. Reinstall all such
elements to theiroriginal position.
3. Afterservicing, always check that the screws, components and wiring have been correctly reinstalled. Make sure that
the area around the serviced part has not been damaged.
4. Check the insulation between the blades of the AC plug and accessible conductive parts (examples: metal panels, input
terminals and earphone jacks).
5. Insulation Checking Procedure: Disconnect the power cord from the AC source and turn the power switch ON. Connect
an insulation resistance meter (500 V) to theblades of the AC plug. The insulation resistance between each blade of the
AC plug and accessible conductive parts (see above) should be greaterthan 1 megohm.
6. Always connect a test instrument’s ground lead to the instrument chassis ground before connecting the positive lead;
always remove the instrument’s ground lead last.
1-3
1. Precautions
1-2. Servicing Precautions

Some semiconductor (solid state) devices can be easily damaged by static electricity. Such components are commonly
called Electrostatically Sensitive Devices (ESD). Examples of typical ESD are integrated circuits and some eld-effect
transistors. The following techniques will reduce the incidence of component damage caused by static electricity.
1. Immediately before handling any semiconductor components or assemblies, drain the electrostatic charge from your
body by touching a known earth ground. Alternatively, weara discharging wrist-strap device. To avoid a shock hazard,
be sure to remove the wrist strap before applying power to the monitor.
2. After removing an ESD-equipped assembly, place it on a conductive surface such as aluminum foil to prevent
accumulation of an electrostatic charge.
3. Do not use freon-propelled chemicals. These can generate electrical charges sufcient to damage ESDs.
4. Use only a grounded-tip soldering iron to solder or desolderESDs.
5. Use only an anti-static solder removal device. Some solder removal devices not classied as “anti-static” can generate
electrical charges sufcient to damage ESDs.
6. Do not remove a replacement ESD from its protective package until you are ready to install it. Most replacement ESDs
are packaged with leads that are electrically shorted together by conductive foam, aluminum foil or otherconductive
materials.
7. Immediately before removing the protective material from the leads of a replacement ESD, touch the protective
material to the chassis orcircuit assembly into which the device will be installed.
CAUTION
Be sure no power is applied to the chassis or circuit and observe all other safety precautions.
8. Minimize body motions when handling unpackaged replacement ESDs. Motions such as brushing clothes together, or
lifting your foot from a carpeted oor can generate enough static electricity to damage an ESD.
1-4
1. Precautions
1-3. Static Electricity Precautions

1. Forsafety reasons, more than a people are required for carrying the product.
2. Keep the power cord away from any heat emitting devices, as a melted covering may cause re or electric shock.
3. Do not place the product in areas with poorventilation such as a bookshelf orcloset. The increased internal
temperature may cause re.
4. Bend the external antenna cable when connecting it to the product. This is a measure to protect it from being exposed
to moisture. Otherwise, it may cause a re or electric shock.
5. Make sure to turn the poweroff and unplug the power cord from the outlet before repositioning the product. Also check
the antenna cable or the external connectors if they are fully unplugged. Damage to the cord may cause re or electric
shock.
6. Keep the antenna far away from any high-voltage cables and install it rmly. Contact with the highvoltage cable or the
antenna falling over may cause re or electric shock.
7. When installing the product, leave enough space (0.4m) between the product and the wall forventilation purposes.
A rise in temperature within the product may cause re.
8. If an equipment is provided with a replaceable battery, and if replacement by an incorrect type could result in an
explosion (for example, with some lithium batteries), the following applies:
CAUTION
• Risk of explosion if battery is replaced by an incorrect type dispose of used batteries according
to the instructions.
• Do not dispose of batteries in a re.
• Do not short circuit, disassemble or overheat the batteries.
• Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent
type.
• Do not be exposed to excessive heat such as sunshine, re or the like.
1-5
1. Precautions
1-4. Installation Precautions

2-1
2. Product specications
2. Product Specications
2-1. Product information
Model QTQ80D
Front View
D
W
* W : Width H : High D : Depth
H
Detail View
Color Front : Carbon Silver
Dimensions(W x H x D) /
Weight 49" Without Stand 1094.8 x 634.4 x 54.9 mm / 13.1 kg
With Stand 1094.8 x 711.4 x 239.8 mm/ 17.5 kg
Dimensions(W x H x D) /
Weight 55" Without Stand 1227.6 x 706.7 x 53.9 mm/ 17.9 kg
With Stand 1227.6 x 783.4 x 255.8 mm/ 21.0 kg
Dimensions(W x H x D) /
Weight 65" Without Stand 1446.5 x 829.8 x 53.9 mm/ 24.1 kg
With Stand 1446.5 x 905.7 x 289.1 mm/ 27.8 kg
Dimensions(W x H x D) /
Weight 75" Without Stand 1670.6 x 958.7 x 53.9 mm/ 34.4 kg
With Stand 1670.6 x 1036.2 x 316.8 mm/ 40.3 kg
Dimensions(W x H x D) /
Weight 85" Without Stand 1892.8 x 1083.2 x 54.9 mm/ 43.3 kg
With Stand 1892.8 x 1163.1 x 338.8 mm/ 50.1 kg

2-2
2. Product specications
2-2. Product specication
NOTE
Design and specications are subject to change without prior notice.
Item 49" 55" 65"
General Information
Product QLED QLED QLED
Cabinet Basic Code Q49TD2 Q55TD2 Q65TD3
Series 8 8 8
Platform(TV) SoC | NIKE-M SoC | NIKE-M SoC | NIKE-M
Display
Inch 49 55 65
Real Inch 48.5 54.6 64.5
Real cm 123 138 163
Resolution 3,840 x 2,160 3,840 x 2,160 3,840 x 2,160
Ultra Black N/A N/A Yes
Video
Picture Engine Quantum Processor 4K Quantum Processor 4K Quantum Processor 4K
Motion Rate MR100 MR200 MR200
PQI (Picture Quality Index) 3200 3800 4000
HDR (High Dynamic Range) Quantum HDR 1000 Quantum HDR 1500 Quantum HDR 1500
HDR10+ Yes Yes Yes
HLG (Hybrid Log Gamma) Yes Yes Yes
Contrast Direct Full Array 8x Direct Full Array 8x Direct Full Array12x
Color 100% Color Volume with
Quantum Dot
100% Color Volume with
Quantum Dot
100% Color Volume with
Quantum Dot
Viewing Angle N/A Wide Viewing Angle Ultra Viewing Angle
Micro Dimming Supreme UHD Dimming Supreme UHD Dimming Supreme UHD Dimming
Local Dimming Direct Full Array Direct Full Array Direct Full Array
Contrast Enhancer Yes Yes Yes
Auto Motion Plus Yes Yes Yes
LED Clear Motion Yes Yes Yes
Film Mode Yes Yes Yes
Picture HDMI Black Level HDMI Black Level HDMI Black Level
Response Time 6ms 6ms 6ms
Viewing Angle (H/V) 89/89 89/89 89/89
Natural Mode Support Yes Yes Yes

2-3
2. Product specications
Item 49" 55" 65"
Audio
Dolby Digital Plus Yes Yes Yes
Dialog Enhancement Yes Yes Yes
Sound Output (RMS) 40W 60W 60W
Speaker Type 2.2CH 2.2.2CH 4.2.2CH
Woofer Yes Yes Yes
Main SpeakerOutput (W) 10W+10W 10W+10W 7W+7W
Woofer Speaker Output (W) 10W+10W 10W+10W 10W+10W
Multiroom Link Yes Yes Yes
Bluetooth Audio Yes Yes Yes
Smart Service
Smart TV Type Smart Smart Smart
Bixby
US English, Korean, UK
English, French, German,
Italian, Spanish, India
English (features vary by
language)
US English, Korean, UK
English, French, German,
Italian, Spanish, India
English (features vary by
language)
US English, Korean, UK
English, French, German,
Italian, Spanish, India
English (features vary by
language)
Far-Field Voice Interaction Yes Yes Yes
Works With Google
Assistant
Yes (GB, FR, DE, IT, ES, AT,
DK, IE, NL, NO, SE only)
Yes (GB, FR, DE, IT, ES, AT,
DK, IE, NL, NO, SE only)
Yes (GB, FR, DE, IT, ES, AT,
DK, IE, NL, NO, SE only)
Works With Alexa Yes (GB, FR, DE, IT, ES, AT,
IE only)
Yes (GB, FR, DE, IT, ES, AT,
IE only)
Yes (GB, FR, DE, IT, ES, AT,
IE only)
TV Plus Yes(GB/FR/DE/IT/ES/AT/
CH only)
Yes(GB/FR/DE/IT/ES/AT/
CH only)
Yes(GB/FR/DE/IT/ES/AT/
CH only)
Web Browser Yes Yes Yes
SmartThings App Support Yes Yes Yes
SmartThings Yes Yes Yes
Universal Guide Yes(GB/FR/DE/IT/ES
only)
Yes(GB/FR/DE/IT/ES
only)
Yes(GB/FR/DE/IT/ES
only)
Gallery Yes Yes Yes
VESA Standard
Screw Size M8 M8 M8
Screw depth 26-28 26-28 26-28
VESA Spec 200 x 200 200 x 200 400 x 300
Smart Feature
TV to Mobile - Mirroring Yes Yes Yes
Mobile to TV - Mirroring,
DLNA Yes Yes Yes
360 Video Player Yes Yes Yes

2-4
2. Product specications
Item 49" 55" 65"
360 Camera Support Yes Yes Yes
Easy Setup Yes Yes Yes
App Casting Yes Yes Yes
Wired TV On - Samsung
WOL Yes Yes Yes
Bluetooth Low Energy Yes Yes Yes
WiFi Direct Yes Yes Yes
TV Sound to Mobile Yes Yes Yes
Sound Mirroring Yes Yes Yes
Feature
Ambient Mode Ambient Mode+ Ambient Mode+ Ambient Mode+
Instant On Yes Yes Yes
Digital Clean View Yes Yes Yes
Auto Channel Search Yes Yes Yes
Auto Power Off Yes Yes Yes
Caption (Subtitle) Yes Yes Yes
ConnectShare™ (HDD) Yes Yes Yes
ConnectShare™ (USB 2.0) Yes Yes Yes
Embeded POP Yes Yes Yes
EPG Yes Yes Yes
Game Mode
Yes (Auto Game Mode
(ALLM), Game Motion
Plus, Dynamic Black
EQ, Surround Sound,
4K@120Hz (HDMI Port 4))
Yes (Auto Game Mode
(ALLM), Game Motion
Plus, Dynamic Black
EQ, Surround Sound,
4K@120Hz (HDMI Port 4))
Yes (Auto Game Mode
(ALLM), Game Motion
Plus, Dynamic Black
EQ, Surround Sound,
4K@120Hz (HDMI Port 4))
FreeSync FreeSync FreeSync Premium FreeSync Premium
IP Control Yes Yes Yes
OSD Language
27 European Languages
+ Russian(only when
connecting to Network in
EE,LV,LT)
27 European Languages
+ Russian(only when
connecting to Network in
EE,LV,LT)
27 European Languages
+ Russian(only when
connecting to Network in
EE,LV,LT)
BT HID Support Yes Yes Yes
USB HID Support Yes Yes Yes
V-Chip N/A N/A N/A
MBR Support Yes Yes Yes
IPv6 Support Yes Yes Yes

2-5
2. Product specications
Item 49" 55" 65"
System
Digital Broadcasting DVB-TCS2(T2 Ready) x 2 DVB-TCS2(T2 Ready) x 2 DVB-TCS2(T2 Ready) x 2
DTV Sound System Dolby Dolby Dolby
Analog Tuner Yes Yes Yes
Core Component
DDR SDRAM Samsung Samsung Samsung
Flash Memory EMMC | 8GB EMMC | 8GB EMMC | 8GB
Serial Flash Memory WINBOND WINBOND WINBOND
Connectivity
HDMI 4 4 4
USB 2 2 2
Ethernet (LAN) Yes Yes Yes
Digital Audio Out (Optical) 1 1 1
RF In (Terrestrial / Cable
input / Satellite Input)
1/1(Common Use for
Terrestrial)/2
1/1(Common Use for
Terrestrial)/2
1/1(Common Use for
Terrestrial)/2
Ex-Link ( RS-232C ) N/A N/A N/A
HDMI A / Return Ch.
Support Yes Yes Yes
HDMI Quick Switch Yes Yes Yes

2-6
2. Product specications
Item 75" 85"
General Information
Product QLED QLED
Cabinet Basic Code Q75TD2 Q85TD2
Series 8 8
Platform(TV) SoC | NIKE-M SoC | NIKE-M
Display
Inch 75 85
Real Inch 74.5 84.5
Real cm 189 214
Resolution 3,840 x 2,160 3,840 x 2,160
Ultra Black N/A N/A
Video
Picture Engine Quantum Processor 4K Quantum Processor 4K
Motion Rate MR200 MR200
PQI (Picture Quality Index) 3800 3800
HDR (High Dynamic Range) Quantum HDR 1500 Quantum HDR 1500
HDR10+ Yes Yes
HLG (Hybrid Log Gamma) Yes Yes
Contrast Direct Full Array 8x Direct Full Array 8x
Color 100% Color Volume with Quantum Dot 100% Color Volume with Quantum Dot
Viewing Angle Wide Viewing Angle Wide Viewing Angle
Micro Dimming Supreme UHD Dimming Supreme UHD Dimming
Local Dimming Direct Full Array Direct Full Array
Contrast Enhancer Yes Yes
Auto Motion Plus Yes Yes
LED Clear Motion Yes Yes
Film Mode Yes Yes
Picture HDMI Black Level HDMI Black Level
Response Time 6ms 6ms
Viewing Angle (H/V) 89/89 89/89
Natural Mode Support Yes Yes

2-7
2. Product specications
Item 75" 85"
Audio
Dolby Digital Plus Yes Yes
Dialog Enhancement Yes Yes
Sound Output (RMS) 60W 60W
Speaker Type 2.2.2CH 2.2.2CH
Woofer Yes Yes
Main SpeakerOutput (W) 10W+10W 10W+10W
Woofer Speaker Output (W) 10W+10W 10W+10W
Multiroom Link Yes Yes
Bluetooth Audio Yes Yes
Smart Service
Smart TV Type Smart Smart
Bixby
US English, Korean, UK English, French,
German, Italian, Spanish, India English
(features vary by language)
US English, Korean, UK English, French,
German, Italian, Spanish, India English
(features vary by language)
Far-Field Voice Interaction Yes Yes
Works With Google
Assistant
Yes (GB, FR, DE, IT, ES, AT, DK, IE, NL,
NO, SE only)
Yes (GB, FR, DE, IT, ES, AT, DK, IE, NL,
NO, SE only)
Works With Alexa Yes (GB, FR, DE, IT, ES, AT, IE only) Yes (GB, FR, DE, IT, ES, AT, IE only)
TV Plus Yes(GB/FR/DE/IT/ES/AT/CH only) Yes(GB/FR/DE/IT/ES/AT/CH only)
Web Browser Yes Yes
SmartThings App Support Yes Yes
SmartThings Yes Yes
Universal Guide Yes(GB/FR/DE/IT/ES only) Yes(GB/FR/DE/IT/ES only)
Gallery Yes Yes
VESA Standard
Screw Size M8 M8
Screw depth 26-28 25-27
VESA Spec 400 x 400 600 x 400

2-8
2. Product specications
Item 75" 85"
Smart Feature
TV to Mobile - Mirroring Yes Yes
Mobile to TV - Mirroring,
DLNA Yes Yes
360 Video Player Yes Yes
360 Camera Support Yes Yes
Easy Setup Yes Yes
App Casting Yes Yes
Wired TV On - Samsung
WOL Yes Yes
Bluetooth Low Energy Yes Yes
WiFi Direct Yes Yes
TV Sound to Mobile Yes Yes
Sound Mirroring Yes Yes
Feature
Ambient Mode Ambient Mode+ Ambient Mode+
Instant On Yes Yes
Digital Clean View Yes Yes
Auto Channel Search Yes Yes
Auto Power Off Yes Yes
Caption (Subtitle) Yes Yes
ConnectShare™ (HDD) Yes Yes
ConnectShare™ (USB 2.0) Yes Yes
Embeded POP Yes Yes
EPG Yes Yes
Game Mode
Yes (Auto Game Mode (ALLM), Game
Motion Plus, Dynamic Black EQ,
Surround Sound, 4K@120Hz (HDMI Port
4))
Yes (Auto Game Mode (ALLM), Game
Motion Plus, Dynamic Black EQ,
Surround Sound, 4K@120Hz (HDMI Port
4))
FreeSync FreeSync Premium FreeSync Premium
IP Control Yes Yes
OSD Language
27 European Languages + Russian(only
when connecting to Network in
EE,LV,LT)
27 European Languages + Russian(only
when connecting to Network in
EE,LV,LT)
BT HID Support Yes Yes
USB HID Support Yes Yes
V-Chip N/A N/A
MBR Support Yes Yes
IPv6 Support Yes Yes

2-9
2. Product specications
Item 75" 85"
System
Digital Broadcasting DVB-TCS2(T2 Ready) x 2 DVB-TCS2(T2 Ready) x 2
DTV Sound System Dolby Dolby
Analog Tuner Yes Yes
Core Component
DDR SDRAM Samsung Samsung
Flash Memory EMMC | 8GB EMMC | 8GB
Serial Flash Memory WINBOND WINBOND
Connectivity
HDMI 4 4
USB 2 2
Ethernet (LAN) Yes Yes
Digital Audio Out (Optical) 1 1
RF In (Terrestrial / Cable
input / Satellite Input) 1/1(Common Use for Terrestrial)/2 1/1(Common Use for Terrestrial)/2
Ex-Link ( RS-232C ) N/A N/A
HDMI A / Return Ch.
Support Yes Yes
HDMI Quick Switch Yes Yes

2-10
2. Product specications
2-3. Accessories
NOTE
• The items’ colors and shapes mayvary depending on the model.
• Cables not included in the package contents can be purchased separately.
• The part code for some accessories may differdepending on your region.
• The provided accessories mayvary depending on the model.
Product Remark
• Power Cable
• Reference Electrical Parts List in Exploded View
• Batteries (AAA x 2)
• Regulatory Guide
• Samsung Smart Remote
• User Manual
ForWall Mount
• Wall Mount Adapter (4 EA)

2-11
2. Product specications
2-4. Supported Formats
Supported external subtitles
Name Format
MPEG-4 Timed text .ttxt
SAMI .smi
SubRip .srt
SubViewer .sub
Micro DVD .sub or .txt
SubStation Alpha .ssa
Advanced SubStation Alpha .ass
SMPTE-TT Text .xml
Supported internal subtitles
Name Format
Xsub AVI
SubStation Alpha MKV
Advanced SubStation Alpha MKV
SubRip MKV
VobSub MKV
MPEG-4 Timed text MP4
TTML in smooth streaming MP4
SMPTE-TT Text MP4
SMPTE-TT PNG MP4
Supported image formats and resolutions
File extension Format Resolution
*jpg
*jpeg JPEG 15360 x 8640
*png PNG 4096 x 4096
*bmp BMP 4096 x 4096
*mpo MPO 15360 x 8640