English - 8
Plug & Play (Initial Setup)
When you turn the TV on for the first time, a sequence of on-screen prompts will assist in configuring basic
settings. To turn on the TV, press the POWER
P
button.
✎
Plug & Play is available only when the Source is set to TV.
✎
Before turning on the TV, make you have connected the TV to an antenna or cable connection (p. 7).
1Selecting the OSD
Language
Press the ▲ or ▼ button to select a language. Press ENTER
E
twice when done.
2Setting the Network Set up your network connection. Press the ENTER
E
button to
start. If you do not know your network set up information or want to
set to it later, select Skip. We suggest you skip network connection
setup now and refer to “Network menu” in the e-Manual for set up
requirements and instructions, and the Network Connection section
of this manual(Page 13).
You can set up the network connection later using the Network
menu.
3Software Upgrade When network connection settings are complete, Software Upgrade is available.
Select Next to upgrade TV software. Your TV will automatically upgrade, if your
TV need a software upgrade. If you want to upgrade later, select the Skip. For
more information, refer to “Software Upgrade” (Preference Features → Support
Menu) in the e-Manual.
✎
This may take some time, depending on network status.
4Selecting the usage
mode
Press the ▲ or ▼ button to select Home Use, and then press the ENTER
E
button twice.
•Select the Home Use mode. Store Demo mode is for retail environments.
5Setting the Clock
Mode
Set the Clock Mode automatically or manually.
•Auto: Set the Clock Mode automatically.
•Manual: Allows you to manually set the current date and time.
6Selecting search
options for auto tuning
Press the ▲ or ▼ button to select Air or Cable, and then press ENTER
E
. A
check appears on your selection. Select Next, and then press the ENTER
E
button. You can check both if you have both connected.
7Selecting and
memorizing channels
The channel search will start automatically. This can take up to 30 minutes.
For more information, refer to Channel → Auto Program in the e-Manual.
✎
Press the ENTER
E
button at any time to interrupt the memorization
process.
8 Enjoy your TV. If you want to watch a broadcast program, select Close.
If you want to enjoy Smart Hub, select Smart Hub. Smart Hub will start. For
more detailed information, refer to “Smart Hub” in the e-Manual.
If You Want to Rerun Plug & Play...
O
MENU → System → Plug & Play → ENTER
E
✎
NOTE
•To change the TV’s setting from Store Demo to Home Use when not in Plug & Play, press the volume
button on the TV. When you see the volume in the OSD, press and hold MENU for 5 sec.
•Select System - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-
0.”
If you want to change the PIN number, use the Change PIN function.
P
[PD6900-ZL]BN68-03424C-01L02.indb 8 2011-02-24 오후 7:26:23
